1/59
Looks like no tags are added yet.
The difference between the value of a physical quantity determined by an experiment and the true value is called
Error
A percentage difference or an absolute gives the ________ of your results.
Accuracy
The way you carry out a measurement and the way you report it gives the ________ of your results.
Precision
All digits between the least and most significant digit are counted as
Significant Figures
In the Introductory Experiment, was your air track level? How could you have used the behavior of the air track to answer this question and, if the answer is "no", to make it level?
To level out the air track, you must have loosened or tightened the screw holding the stand underneath to make sure the glider stayed in the middle when v = 0.
In the Introductory Experiment, what could have been the sources of friction slowing the glider down?
The metal motion detector casuing air resistance and/or the dust caught in the holes in the track.
In the Intro Experiment, what could you have done to cause the glider to have accelerated even after you had let it go?
Removed the bumbers and/or changed the amount of air coming from the air track.
In the Introductory Experiment, what were your observations upon running several different motion experiments?
The graph peaked and troughed when the glider hit the metal bumpers, it increased position from left to right and decreased postion from right to left, and the more the glider hit and returned to the bumber from a push, the more peaks and troughs the graph plotted.
In the Introductory Experiment, when you pushed the glider and started the motion detector, when did the speed change and what did the parabolic curve represent?
From times 0 to 2.6, the speed increased. From times 2.6 to 3.1, speed decreased by .25 m/s. The parabolic curve represented the metal bumber colliding with the glider.
In the Introductory Experiment, how did the orientation of the motion detector affect what was recorded by the computer?
When moving the motion detector from left to right, the graph plotted a plateau.
Analysis using Newton's Second Law shows that acceleration formula of an object sliding down a nearly frictionless inclined plane is
a = gsinθ
In the Motion with Constant Acceleration Experiment, what did the straight line segment in the graph of position versus time mean?
Constant Velocity
In the Motion with Constant Acceleration Experiment, what did a curved line mean?
Increasing or Decreasing Velocity
In the Motion with Constant Acceleration Experiment, what was the pattern when the glider striked and rebounded from the end of the track?
The pattern showed an upside down V and the rebound represented a change in direction.
In the Motion with Constant Acceleration Experiment, how did you deduce the velocity from your graph?
We used the curve fitting feature to determine the slope of the position vs. time graph which was the velocity.
In the Motion with Constant Acceleration Experiment, what were the physical meanings of A, B, and C?
A = 1/2 the acceleration
B = the initial velocity
C = the initial position
In the Motion with Constant Acceleration Experiment, what were the units of A, B, and C?
A = m/s^2 (meters per second squared)
B = m/s (meters per second)
C = m (meters)
In the Motion with Constant Acceleration Experiment, were the numbers obtained for B and C reasonable?
Yes, B was "-0.07 m/s" which is basically 0 as it was not moving initially. Yes, C is correct because the metal plate was initially .2m away.
Whar is the Percent Difference Formula?
(Experimental - Theoretical) / Theoretical x 100
In the Motion with Constant Acceleration Experiment, what could have been a source of error in your calculations?
Small differences in position found in graph shown on paper.
In the Motion with Constant Acceleration Experiment, what could have happened if you changed the incline by removing one spacer?
Taking away one of the spacers would have caused a decrease in slope, velocity, and acceleration.
When a body is in equilibrium, what two conditions must be satisfied?
(1) The vector sum of all the forces acting on the object must be zero.
(2) The sum of all the torques acting on the object must be zero.
What are the two different methods of vector addtion?
Graphical (tip-to-tail) and Analytical (calculating x and y components and adding)
A vector is equivalent to
the sum of its components
In the Equilibrium of a Point Mass Experiment, which methods were listed as the theoretical and experimental?
Analytical = Theoretical
Graphical = Experimental
Newton's Second Law
ΣF = ma
In the Newton's Second Law Experiment, how did you calculate acceleration from the graph?
Acceleration was 2A since A = 1/2 Acceleration
In the Newton's Second Law Experiment, was a level track necessary for accurate measurements in Procedure IV?
A level track was necessary for accurate measurements because a non-level track could cause a shift in acceleration due to a change in slope.
For Uniform Circular Motion specifically, the object's acceleration vector points toward the _______ .
Center of the Circular Path
In the Uniform Circular Motion Experiment, did your data support the prediction that radial force depended on the square of the rotation speed?
Yes, because Frnet = mar = mv^2/5
In the Uniform Circular Motion Experiment, what did the intercept in the Intercept of Mass vs. Number Graph represent and how did your value compare to other groups?
The intercept represented the mass of the sliding carriage and the group next to us had 0.06 kg which was a similar calculation to ours.
In the Uniform Circular Motion Experiment, when you conducted the Force vs. Radius trials, did you get a linear relationships?
Yes, becuase as the radius increased, the Calculated Data also increased while the Fit Coefficient decreased.
In the Uniform Circular Motion Experiment, what physical object provided the necessary radial force to keep the sliding carriage moving in a circle? What type of force was this?
The string caused tension force and kept the sliding carriage from moving in a circle.
In the Uniform Circular Motion Experiment, what other types of forces could have been used as radial forces?
Fricton and Spring
In the Uniform Circular Motion Experiment, what was one way the apparatus could have been modified to use a different type of force to make the the sliding carriage move in a circle.
Rather than having the string on the sliding carriage, you could have added bolts to the sliding carriage similar to the other carriage.
In the Ballistic Pendulum Experiment, which method did you think was more accurate?
I thought the free flight was more accurate because there was nothing to limit its range while the teeth in the rachet assembly limited the ballistic pendulum by not letting it stop at its peak height.
In the Ballistic Pendulum Experiment, what uncertainty was associated with the discrete number of teeth in the rachet assembly of the ballistic pendulum?
The uncertainty was the fact that the teeth limited the ballistic pendulum by not letting it stop at its peak height.
In the Ballistic Pendulum Experiment, when you compared the fraction (E1 - E2) / E1 with ratio m' / (m + m') what did you deduce to be the significance of the mass ratio?
They were almost the same because the energy lost was the same as the mass ratio.
Which type of collison is momentum conserved, but kinetic energy is not?
Inelastic Collision
Which type of collison is momentum and kinetic energy both conserved?
Elastic Collision
In the Collisons Experiment, for the special case of an inelastic collision between objects of equal mass how do the inital and final velocities and kinetic energies relate?
vi = 2vf
Ki = 2Kf
In the Collisons Experiment, what happened to the left-hand glider after the collision?
After the collison, the left-hand glider slowed down to 0 m/s because it was an elastic collsion (kinetic energy and momentum were conserved upon impact).
In the Collisons Experiment during the Unknown Mass trial, after the collison, what happened to the speed of the more massive glider?
It decreased speed since the smaller glider accelerated.
In the Collisons Experiment during the Unknown Mass trial, after the collison, was the speed of the less massive glider larger or smaller than the initial speed of the more massive glider?
The less massive glider's speed was larger.
In the Collisons Experiment during the Smaller Mass Hitting a Larger Mass That is at Rest trial, what did you observe regarding speeds and directions of each glider before and after the collision.
The smaller mass rebounded.
When an object is in translational equilibrium and rotational equilibrium, we say it is in
Static Equilibrium
In the Static Equilibrium Experiment, what did you describe as the center of mass?
The spot where the meter stick could balance without tipping over.
In the Static Equilibrium Experiment, how did you balance the 20g mass with the 50g mass?
The 50g mass had to be closer to the center of mass than the 20g mass.
In the Static Equilibrium Experiment, what were two equations you set up of the sum of forces and torques using the end of the meter stick as the axis of rotation?
FA + FB = msg + m1g + m2g = 0
FArA + FBrB - msgr -m1gr - m2gr = 0
In the Static Equilibrium Experiment, was there a point on the meter stick where the sum of the torques would not be zero, that is, was there a location on the meter stick where the system was NOT in static equilibrium?
There was no point becuase they were in equilibrium everywhere.
In the Static Equilibrium Experiment, what did you name as two situations you had encountered outside of the lab that invloved torque and how they illustrated it?
Driving; engine creates torque
Baseball; swinging a bat creates torque
When a mass is executing a vibratory motion under the influence of a restoring force directly proportional to the displacement of the mass from its equilibrium position, then that motion is
Simple Harmonic
In the Simple Harmonic Motion Experiment, why did all the peaks in the graph get smaller as time increased?
Air resistance slowed down the glider as time increased, hence the peaks got smaller as time increased.
In the Standing Waves in a String Experiment, what was the correlation between a decreasing mass and wave speed?
As the mass decreased, so did the tension force, hence a slower wave speed.
Inelastic Collison Momentum Equation
m1vi = (m1 + m2) vf
Inelastic Collison Kinetic Energy Equation
1/2 m1vi^2 = 1/2 (m1 + m2) vf^2
Elastic Collision Momentum Equation
m1v1i + m2v2i = m1v1f + m2v2f
Elastic Collison Kinetic Energy Equation
1/2 m1v1i^2 + 1/2 m2v2i^2 = 1/2 m1v1f^2 + 1/2 m2v2f^2
Period in SHM is
Torque = 2pi sqrt m/k
Wave Speed (c) =