1/67
Looks like no tags are added yet.
Step 1 of predicting SN1/SN2/E1/E2
Find the electrophile (the carbon with the leaving group) and identify its substitution: methyl, 1°, 2°, or 3°.
Step 2 of predicting SN1/SN2/E1/E2
Classify the nucleophile/base: SBWN (strong base, weak Nu), SBSN (strong base, strong Nu), WBSN (weak base, strong Nu), or WBWN (weak base, weak Nu).
Strong base vs strong nucleophile
SB = negative charge, unstable. SN = negative change, small.
SBWN
Strong base, weak nucleophile. Example: tert-butoxide (-OtBu), which is bulky so it acts as a base, not a nucleophile.
SBSN
Strong base, strong nucleophile. Examples: NaOH, NaOMe, deprotonated alcohols (RO- Na+).
WBSN
Weak base, strong nucleophile. Examples: NaSH, NaBr, NaCN, sodium acetate (they substitute rather than eliminate).
WBWN
Weak base, weak nucleophile. Examples: H2O, MeOH (neutral solvents).
Methyl electrophile (e.g., H3C-I): which mechanism?
Only SN2. There is no beta-H, so E1 and E2 are impossible, and a methyl carbocation is too unstable for SN1.
1° electrophile: which mechanism?
Usually SN2 (never SN1). Exceptions: tert-butoxide (strong base, not a Nu) gives E2; a WBWN gives no reaction.
2° electrophile: which mechanism?
All 4 are possible. E2 with any strong base (SBSN or SBWN); SN2 with WBSN; SN1/E1 with WBWN.
3° electrophile: which mechanism?
Never SN2 (too much steric hindrance, too slow). E2 with any strong base; SN1/E1 with WBSN or WBWN.
Why do SN1 and E1 almost always happen together?
They share the same rate-limiting step (leaving group leaves to form a carbocation), so it is hard to get just one.
1° alkyl halide to alcohol: reagent and mechanism
NaOH, by SN2 (1° wants SN2).
3° alkyl halide to alcohol: reagent and mechanism
H2O, by SN1 (3° wants SN1).
2° alkyl halide to alcohol: why not NaOH or H2O?
NaOH is a strong base, so it gives E2 (alkene). H2O works but goes SN1/E1, which scrambles stereochemistry and makes some alkene.
2° alkyl halide to alcohol while keeping stereochemistry
Sodium acetate (Na+ -OAc, a WBSN, so SN2) to make an ester; 2. NaOH, H2O to turn the ester into an alcohol. Overall: inversion at that carbon, no E2.
3 ways to turn an alcohol into an alkyl halide
1) Protonate it with HBr. 2) Convert it to a tosylate (TsCl, pyridine) then add NaBr. 3) Use PBr3 (or SOCl2 for chloride).
Alcohol + HBr
The OH is protonated to -OH2+ (a great leaving group), then Br- (WBSN) attacks to give the alkyl bromide. SN1 is possible, so stereochemistry may be lost. Least reliable method.
Alcohol: 1. TsCl, pyr; 2. NaBr
Alcohol becomes a tosylate (great LG), then Br- does SN2. Product: alkyl bromide with INVERTED stereochemistry.
Alcohol (1° and 2°) + PBr3
The OH oxygen attacks P (SN2) and Br- is released; then Br- does SN2 backside attack, kicking out HOPBr2. Product: alkyl bromide with inverted stereochemistry.
Williamson ether synthesis
NaH, 2. alkyl halide (R'-Br). Alcohol becomes an ether by SN2. Good for making asymmetric ethers. Works best with methyl/1° alkyl halides.
Alcohol + H2SO4, H2O (together)
Makes a SYMMETRIC ether (two of the same alkyl groups joined by O). H2SO4 and H2O together make H3O+.
Dehydration
Removing H2O (an H and an adjacent OH) from an alcohol to form an alkene. Reagent: H3PO4.
Oxidation (in organic chemistry)
Increasing oxygen content and/or decreasing hydrogen content. For alcohols: remove 2 H (one from O, one from the C) to make C=O.
Chromic acid reagent
Na2Cr2O7, H2SO4, H2O. A STRONG oxidant. Turns 1° alcohol into caboxylic acid.
PCC
Pyridinium chlorochromate (ClCrO3- pyH+). A MILD oxidant. Turns 1° alcohol into aldehyde.
2° alcohol + PCC or chromic acid
Ketone. Same product with either oxidant.
3° alcohol + PCC or chromic acid
No reaction. A 3° alcohol has no H on the carbon to remove, so it cannot be oxidized.
Why does 2° alkoxide (R-O^-) + 2° alkyl bromide (R-Br) NOT give an ether?
The alkoxide is SBSN and the electrophile is 2°, so E2 wins. You get an alkene instead of a Williamson ether.
Epoxide opening under BASIC conditions
Strong Nu/base; 2. H3O+. Nu attacks first (SN2-like) at the LESS substituted carbon, with inversion at that carbon; then O- is protonated to OH.
Epoxide opening under ACIDIC conditions
The O is protonated FIRST, then a weak Nu attacks the MORE substituted carbon (SN1-like), but stereochem still inverts (SN2-like). Can't use a strong Nu (it would get protonated).
Epoxide: which carbon does the Nu attack?
Basic conditions: less substituted carbon. Acidic conditions: more substituted carbon.
Making an alkene from an alkyl halide with NaNH2
E2. NaNH2 is a strong base (SBSN) that removes a beta-H as the halide leaves.
Making an internal alkyne from a dihalide
NaNH2 (2 equivalents). Two E2 eliminations in a row remove 2 H and 2 halides.
Making a terminal alkyne: why 3 equiv NaNH2?
Two equiv do the two E2s, but the terminal alkyne H is relatively acidic (pKa 25 vs NH3 pKa 38), so the third equiv deprotonates it. The acetylide anion (C≡C- Na+) is favored.
Grignard reaction
A useful way to make C-C bonds. Reactant: aldehyde or ketone. Reagents: 1. RMgX; 2. H3O+. Product: alcohol with a new C-C bond.
Why is the carbon in a Grignard reagent nucleophilic?
Mg is less electronegative than C, so C is partially negative. You can treat it as an ionic bond: R- +MgBr.
Grignard mechanism
1) The carbanion attacks the carbonyl C (Nu attack), forming the new C-C bond and O-. 2) H3O+ protonates O- (proton transfer) to give the alcohol.
Square/circle trick (forward): predicting Grignard products
1) Square the carbonyl C. 2) Circle the C attached to Mg. 3) Redraw the carbonyl compound with C=O changed to C-OH. 4) Attach the circled C (and its chain) to the squared C.
Square/circle trick (backwards): finding Grignard reactants
1) Square the C bearing OH. 2) Circle a C one bond away. 3) Erase the bond between them. 4) Turn the alcohol into a carbonyl. 5) Put MgBr on the circled C.
Electrophilic addition reaction (EAR)
Alkene (the nucleophile) reacts with E-Nu: breaks the pi bond and the E-Nu sigma bond, makes 2 new sigma bonds. E and Nu are added across the double bond.
Hydrohalogenation
Adding H-X (usually HBr or HCl) across a double bond. H goes on one C, X on the other. Racemic
Markovnikov's rule
In electrophilic additions through a carbocation, the most stable carbocation forms, so the nucleophile adds to the MORE substituted carbon (H to the less substituted).
Asymmetric alkene + HCl
The H adds to make the more stable (more substituted) carbocation, so Cl ends up on the more substituted carbon (Markovnikov).
Hydration (acid-catalyzed)
Alkene + H2SO4, H2O (H3O+). Adds H and OH across the alkene. Markovnikov (OH on more substituted C), racemic, rearrangements possible.
Aromatic ring (benzene) + HBr
No reaction. Aromatic rings have big resonance stabilization; they are a different functional group, and EAR is only for alkenes and alkynes.
Halogenation of an alkene
Alkene + Br2 in CCl4 (solvent). Adds Br to both carbons, ANTI addition (one Br wedge, one dash), giving enantiomers.
Mechanism of halogenation (Br2)
1) The alkene attacks Br2 to form a bromonium ion + Br-. 2) Br- does SN2-like backside attack on the ring, so the two Br end up anti.
Halohydrin formation (Halogenation but with H2O not CCl4)
Alkene + Br2 in H2O (water is the solvent, not CCl4). Products: Br and OH, anti addition, with OH on the MORE substituted carbon.
Do 3-membered ring intermediates (bromonium, mercurinium) rearrange?
No. No carbocation means no rearrangements.
Oxymercuration-reduction (Hydration WITHOUT rearrangement)
Step 1: Hg(OAc)2 forms a 3-membered ring with the alkene; H2O attacks the more substituted C in that ring, then loses H+. Step 2: NaBH4 replaces Hg with H (radical step). Not anti addition, stereochem is removed.
Hydration: H2SO4/H2O vs. oxymercuration-reduction
Both put OH on the more substituted carbon available (Markovnikov). H2SO4/H2O can rearrange (carbocation); Hg(OAc)2/NaBH4 does not (so most subbed carbon on the ring).
Epoxidation
Alkene + mCPBA gives an epoxide. Concerted; the alkene's geometry is kept (cis stays cis).
Hydroboration-oxidation (hydration again)
BH3, THF; 2. H2O2, NaOH. Adds H and OH, ANTI-MARKOVNIKOV (OH on the LESS substituted C), syn addition.
Why does boron add to the less substituted carbon?
B is larger than H and wants the carbon with more space; also, as the double bond breaks, partial + charge builds on the more substituted carbon, where H goes.
Why is hydroboration a syn addition?
BH2 and H add in one concerted step, so they must end up on the same side.
Comparing hydrations: where does OH go?
H2SO4/H2O and oxymercuration: more substituted C (Markovnikov). Hydroboration-oxidation (BH3; H2O2, NaOH): less substituted C (anti-Markovnikov).
Syn dihydroxylation
OsO4; 2. Na2SO3 (reduction). Adds 2 OH groups to the SAME side of the alkene, because both O are attached to Os.
Ozonolysis
O3; 2. S(CH3)2. 'Chops' the alkene in half at the C=C; each carbon becomes a C=O (aldehyde or ketone).
Hydrogenation of an alkene
H2, Pd/C. Adds H2 across the alkene to make an alkane, syn addition.
Hydrohalogenation of Alkyne
Need to add more of the HBr to get remove all pi bonds
Alkyne hydration (H2SO4, H2O)
Like alkene hydration, but it gives an enol, which tautomerizes to a KETONE (Markovnikov; the C=O is on the more substituted carbon).
Enol
Alkene + alcohol (OH on a C=C carbon). Not stable in acid, so it tautomerizes to the keto form.
Keto-enol tautomerization
Two versions of the same compound interconverting (enol vs. keto/C=O). The keto form is usually more stable.
Terminal alkyne to aldehyde (anti-Markovnikov)
Sterically hindered borane (bulky R2BH); 2. NaOH, H2O. B goes on the less substituted C, gets replaced by OH, and the enol tautomerizes to an aldehyde.
Alkyne + H2, Pd/C
Full hydrogenation to an ALKANE. There are lots of H on the flat surface, so you can't stop at the alkene.
Alkyne + H2, Lindlar catalyst
Stops at the CIS alkene. Lindlar is 'poisoned' Pd, so only 1 H2 adds, syn addition.
Alkyne hydration: H2SO4/H2O vs. bulky borane
H2SO4/H2O gives a ketone (Markovnikov). 1. bulky R2BH; 2. NaOH, H2O gives an aldehyde from a terminal alkyne (anti-Markovnikov).