1/55
Flashcards covering definitions of terms, empirical formulas, governing principles, and Civil Engineering board exam questions in Fluid Mechanics and Hydraulics.
How is absolute pressure mathematically defined in fluid mechanics?
It is equal to gage pressure plus atmospheric pressure: Pabs=γh+Patm.
What is absolute zero in terms of fluid mechanics and pressure?
The theoretical state of zero mechanical pressure (0Pa abs), representing a complete absence of force exerted by particles and matching a perfect vacuum.
What instrument is used to measure the density of oil?
Acrometer
What is activated sludge?
A semi-liquid mass removed from the liquid flow of sewage and subjected to aeration and aerobic microbial action; the end product is dark to golden brown, partially decomposed, granular, and flocculent, with an earth odor when fresh.
What is the difference between adhesion and cohesion in fluids?
Adhesion is the attractive force between fluid molecules and any solid substance in contact, whereas cohesion is the intermolecular attraction by which separate particles of the fluid are held together.
What is an aerometeorograph?
A self-recording instrument used on aircraft for simultaneous recording of atmospheric pressure.
What device measures the proportion of the total volume of soil occupied by air?
Air Picnometer
What type of barometer operates without using liquid?
Aneroid barometer
What is an Arch Dam?
A concrete or masonry structure that curves upstream into a reservoir, stretching from one canyon wall to the other.
What does Archimedes' Principle state?
Any body immersed in a fluid is acted upon by an upward buoyant force equal to the weight of the displaced fluid.
What are the standard equivalencies of 1atm and 1bar in kilopascals?
1atm=101.325kPa and 1bar=100kPa.
What is a Bentometer (Bend meter/Bendometer)?
A calibrated band or elbow with suitable upstream and downstream straight lengths for measurement of flows.
What instrument was designed by Bentzel to measure fluid velocity?
Bentzel tube
What is Bernoulli's energy theorem?
Neglecting friction, the total head, or the total amount of energy per unit weight, is the same at every point in the path of flow.
What is a Bordas mouthpiece?
A re-entrant tube consisting of a thin tube projecting into the reservoir about one diameter, using the principle of pressure momentum theory (force equals rate of change of momentum).
What is the formula for boundary shear stress (τo) acting over the wetted surface of a channel?
τo=γRS
How is the bulk modulus of elasticity defined?
The ratio of the change in unit pressure to the corresponding volume change per unit volume.
What is the formula for buoyant force (BF)?
BF=γVD, where VD is the volume of fluid displaced.
What is a Buttress Dam?
A dam consisting of a wall or face supported by several buttresses on the downstream side, usually reinforced concrete.
What is the Center of Pressure on a submerged surface?
The point of application of the total hydrostatic force on a submerged surface.
What is the side slope of a Cipolletti (Trapezoidal) weir and why is it used?
Each side of the notch has a slope of 1 horizontal to 4 vertical to compensate for end contractions.
How is the coefficient of discharge (Cd) defined in relation to velocity and contraction?
It is the product of the coefficient of velocity (Cv) and the coefficient of contraction (Cc).
How is the coefficient of uniformity (modulus of uniformity) calculated for soil?
It is expressed as D10D60, representing the ratio between the grain diameter larger than 60% by weight of soil particles to the effective size (diameter larger than 10% by weight).
What is the Continuity Equation for incompressible fluids?
Q=A1v1=A2v2=A3v3=constant
What defines continuous flow in a stream?
Occurs when the discharge Q at every section of a stream is the same at any given time (or the number of particles passing every section is always equal).
What is a Differential-Type Manometer?
A manometer without an atmospheric surface, capable of measuring only differences of pressure.
At what drying temperature is the dry density of a soil sample determined?
105∘C
What represents the difference between the Energy Grade Line (EGL) and the Hydraulic Grade Line (HGL)?
EGL represents the change in total energy along a conduit, while HGL represents the change in potential energy (pressure plus elevation head). The difference between them is the velocity head (2gv2).
How are the Factors of Safety against Overturning (FSo) and Sliding (FSs) on a dam computed?
FSo is the ratio of righting moment to overturning moment; FSs is the ratio of resisting horizontal force to driving horizontal force.
What defines fluid statics?
The study of fluid problems in which there is no relative motion between fluid elements, meaning there are no velocity gradients and no shear stresses.
How is the Froude number defined in an open channel?
The ratio of velocity squared divided by depth times the acceleration of gravity (gdv2).
What is Gay-Lussac's law?
If the volume of a given mass of perfect gas is kept constant, its absolute pressure varies in direct proportion to temperature.
What is a hydraulic jump?
A phenomenon where flow is supercritical upstream and forced to become subcritical downstream (forced by a sill or prevailing depth), causing an abrupt rise/change in depth.
What is hydrodynamics?
A branch of hydraulics dealing with forces (including velocity and acceleration) exerted by or upon liquids in motion.
What are the three forms of energy that must be considered in connection with the flow of liquids?
Kinetic energy, Elevation energy, and Pressure energy.
What characterizes laminar flow?
A type of flow where the paths of individual particles do not cross or intersect.
What causes major head loss (hf) in a pipe system?
Pipe friction along straight sections of pipe of uniform diameter and roughness.
What is the metacenter (M) of a floating body?
The point of intersection between the line of action of the buoyant force in a tilted position and the axis of the body.
What is metacentric height (MG)?
The distance from the metacenter (M) to the center of gravity (G) of the floating body.
Where must the metacenter be located relative to the center of gravity for a floating body to be in stable equilibrium?
The metacenter must be located above the center of gravity.
What equilibrium condition occurs when the metacenter of a floating body is lower than its center of gravity?
Unstable equilibrium
What defines a Newtonian fluid?
A fluid for which shear stress is directly proportional to the rate of shear strain.
What surface shape is formed by an open liquid container rotating at constant angular speed?
A paraboloid
What does Pascal's Law state?
At any point in a fluid at rest, the pressure intensity is of equal magnitude and transmitted undiminished in all directions.
How do discharge and head loss behave in parallel pipe systems?
Total discharge is the sum of individual discharges (Q=Q1+Q2+…) and head loss is equal across all pipes (hL1=hL2=…).
How do discharge and head loss behave in series pipe systems?
Discharge is equal in all pipes (Q1=Q2=…) and total head loss is the sum of individual losses (hL=hL1+hL2+…).
What is the formula for the power of a flowing fluid?
Power=QγE
What is the Reynolds number (Re)?
The ratio of inertial forces to viscous forces.
What occurs at a stagnation point in fluid flow?
It is the point where the dividing streamline meets the body and velocity becomes zero.
What are the dimensions of a standard short tube?
A tube with a square-cornered entrance and a length of about 221 times its diameter.
What does Torricelli's Theorem state?
The speed of efflux is equal to the speed of a free fall from the surface of the reservoir (v=2gh).
What is a water hammer?
A pressure surge or wave caused when a fluid in motion is forced to stop or change direction suddenly due to momentum change.
At what temperature does water achieve its maximum unit weight?
4∘C
What is the value of the surface tension of water at normal room temperature?
0.075N/m
What force enables small insects to walk on the surface of water?
Surface Tension
What is the distinction between a wedge of emersion and a wedge of immersion?
A wedge of emersion is the volume that emerges from the water as a floating body tilts, while a wedge of immersion is the volume that becomes submerged.