1/29
Vocabulary practice flashcards covering solid and hazardous waste concepts, composting regulations, RCRA classifications, landfill engineering, Darcy's law, and groundwater contaminant transport from the FE Environmental review class notes.
40 CFR Part 503
Federal regulations under the Clean Water Act (promulgated February 19, 1993) establishing standards for the use or disposal of sewage sludge through land application, biosolids composting, surface disposal, and incineration.
Class A Biosolids Compost
Compost that meets stringent time and temperature operating requirements (such as 55∘C for at least 3 days in aerated static pile or in-vessel systems, or 55∘C for 15 days with 5 turns in windrows) and Part 503 pollutant limits, producing a marketable product suitable for unrestricted public and farm use.

Class B Biosolids
Biosolids treated to meet minimum pathogen standards (40∘C or higher for 5 days with temperatures exceeding 55∘C for at least 4 hours) that can be applied to agricultural land or used as erosion control at MSW landfills, but cannot be applied to land for human food crops.
Exceptional Quality (EQ) Biosolids
A designation given to biosolids that achieve both the Class A pathogen reduction time and temperature criteria and the Part 503 ceiling concentration limits for trace pollutants.

Aerated Static Pile Composting
A composting method where organic feedstocks are placed in piles of 4 to 8 feet depth over perforated pipes connected to a blower, covered with a 6 to 12 inch blanket of finished compost, and mechanically aerated without physical turning.
In-Vessel Composting
A method of composting that confines decomposing waste within an enclosed reactor or rotating drum to actively regulate moisture, aeration, and temperature while simplifying process air collection for odor control.
Windrow Composting
A composting process that places organic waste in long elongated rows that are periodically turned and mixed mechanically to aerate the material, blend components, and rebuild porosity.
Resource Conservation and Recovery Act (RCRA)
The federal law enacted on October 21, 1976 (amending the Solid Waste Disposal Act of 1965) that governs the cradle-to-grave management, storage, transport, treatment, and disposal of solid and hazardous waste.
RCRA Subtitle D
The regulatory division of RCRA governing non-hazardous solid wastes, including municipal solid waste (MSW) landfill design criteria, which is largely implemented and enforced at the state level.
RCRA Subtitle C
The comprehensive federal regulatory framework under RCRA establishing tracking, handling, storage, and disposal standards for hazardous wastes from point of generation to final disposal.
Ignitability (RCRA Characteristic)
The hazardous characteristic (EPA code D001) defining liquids with a flash point below 60∘C(140∘F), non-liquids capable of causing fire through friction or moisture absorption, ignitable compressed gases, and oxidizers.
Corrosivity (RCRA Characteristic)
The hazardous characteristic (EPA code D002) defining aqueous wastes with a pH≤2 or ≥12.5, or liquids capable of corroding steel at a rate greater than 6.35mm/yr at 55∘C.
Reactivity (RCRA Characteristic)
The hazardous characteristic (EPA code D003) defining materials that are normally unstable, react violently with water, generate toxic gases when exposed to pH between 2 and 12.5 (cyanide or sulfide bearing), or are capable of detonation.
Toxicity Characteristic Leaching Procedure (TCLP)
A laboratory leaching procedure designed to simulate landfill leaching to determine the mobility of specific heavy metals and organic compounds across established regulatory thresholds.
Bevill Exclusion (40 CFR §261.4)
A statutory exclusion under RCRA that exempts fossil fuel combustion waste (such as coal ash and slag) as well as mining overburden and mineral processing wastes from classification as hazardous waste.
Bentsen Amendment (40 CFR §261.4)
A statutory exemption under RCRA section 261.4(b)(5) that exempts drilling fluids, produced waters, and other wastes generated from the exploration and production of oil, gas, and geothermal energy from being regulated as hazardous waste.

Landfill Composite Liner
A base barrier system consisting of an engineered flexible geomembrane (such as 60-mil HDPE) installed directly above a minimum of two feet of compacted soil with a hydraulic conductivity of less than 1.0×10−7cm/s.
Compaction Ratio
The quantitative measure of solid waste volume reduction defined as the ratio of the initial volume of collected waste to its compacted final volume (initial volume/final volume).
Breakthrough Time (t)
The time required for leachate to fully penetrate a landfill liner, calculated as t=K(d+h)d2η, where d is liner thickness, η is effective porosity, K is hydraulic conductivity, and h is the hydraulic head above the liner.
Soil Landfill Cover Water Balance Equation
The hydrological relationship used to model water flow through a landfill cap, given by ΔSLC=P−R−ET−PERsw, where ΔSLC represents storage change, P is precipitation, R is runoff, ET is evapotranspiration, and PERsw is percolation into the underlying waste.

Light Non-Aqueous Phase Liquid (LNAPL)
A low-solubility organic liquid that has a density lower than water (such as gasoline or petroleum fuels), causing it to float and pool along the top of the water table and capillary fringe.
Dense Non-Aqueous Phase Liquid (DNAPL)
An immiscible organic liquid with a density greater than water (such as chlorinated solvents) that migrates downward through the water table and continues sinking until it encounters an impermeable confining layer or aquiclude.
Darcy's Law
A fluid transport equation stating that volumetric flow through porous media is proportional to hydraulic conductivity, hydraulic gradient, and cross-sectional area: q=K⋅i⋅A, valid under laminar flow regimes.
Hydraulic Gradient (i)
The change in total head (energy) lost per unit length of flow path as water moves through a porous medium, represented as i=lh1−h2.
Transmissivity (T)
The rate at which water is transmitted through a unit width of an aquifer under a unit hydraulic gradient, defined mathematically as hydraulic conductivity multiplied by aquifer thickness: T=k⋅B.
Specific Yield
The ratio of the volume of water that drains from a saturated porous medium under the influence of gravity to the total volume of that medium; synonymous with storativity in unconfined aquifers.
Seepage Velocity
The actual linear interstitial velocity of water flowing through the pore spaces of a subsurface medium, calculated by dividing the Darcy flux (Darcy velocity) by effective porosity: vs=ηv.
Retardation Factor (R)
A dimensionless parameter quantifying the delayed migration velocity of a contaminant relative to groundwater flow due to sorption and precipitation processes: R=1+(ηρ)Kd.
Distribution Coefficient (Kd)
The equilibrium partition ratio between the contaminant concentration sorbed to soil solids (X) and the contaminant concentration remaining dissolved in water (C), represented as the slope in a linear sorption isotherm (X=Kd⋅C).
Natural Attenuation
Subsurface processes including biodegradation, dispersion, dilution, sorption, and volatilization that naturally act without human intervention to reduce contaminant mass, toxicity, mobility, or concentration over time.