NUCL 200 midterm 3

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/62

encourage image

There's no tags or description

Looks like no tags are added yet.

63 Terms

1
New cards

Neutron Diffusion

How neutrons move through a material.

Scatter when they collide with atoms

Neutrons move to areas with low neutron flux(neutron current)

2
New cards

Neutron Flux

Measures the intensity of neutron activity at a location

"How many neutrons are passing through a given area over time?"

Φ = nv

n = neutron density

v = neutron speed


3
New cards

Describe PUREX

Plutonium Uranium Reduction EXtraction

Spent fuel is chemically dissolved

Uranium and plutonium are separated from many fission products

Useful potential uranium and plutonium can be recycled

Remaining radioactive waste still requires disposal


Trick = separate uranium and plutonium from spent fuel

4
New cards

Describe 3 uranium recovery methods

  1. Open pit and underground mining - physically mining rocks out of ground. Open pit is used when deposits are close to surface and underground mining when deposits are deeper

  2. In site recovery - wells with uranium formations are drilled into, a chemical solution is injected to dissolve the uranium, which is then pumped back up

  3. Heap leaching - uranium ore is mined and crushed, the chemical solution is applied to ore to dissolve it which it is then extracted. Similar to making coffee


5
New cards

Describe enrichment processes for uranium 235

  1. Gaseous diffusion - UF6 gas passes through porous barriers, U 235 moves faster

  2. Gas Centrifuge - UF6 gas spins at high speed inside a centrifuge, u 235 is lighter so it spins towards the center.


6
New cards

Neutron Current Density

Measures the net movement of neutrons in a particular direction

"Which direction are neutrons moving overall?"

Ficks law

7
New cards

Fick’s Law

J = neutron current density

D = diffusion coefficent

phi = neutron flux

delta phi = gradient of neutron flux

<p>J = neutron current density</p><p>D = diffusion coefficent</p><p>phi = neutron flux</p><p>delta phi = gradient of neutron flux</p>
8
New cards

When to not use fick’s law

1) Near a neutron source → Stream outward instead of scattering

2) Strongly anisotropic scattering → force doesn’t allow random scattering

3) Very close to boundary/source → not enough collisions

4) Strongly absorbing regions → Absorption removes scattering before they can undergo

9
New cards

Diffusion Coefficient

How easily neutrons can diffuse through a material

D = 1/3∑tr or λtr/3

∑tr = total macroscopic cross section + scattering macroscopic cross section(avg cosine of the scattering angle)

larger macroscopic transport cross section = more likely to change direction so it should be smaller

10
New cards

Diffusion Area

L²= D/∑a

11
New cards

Diffusion Length

L = square root D/∑a

12
New cards

Extrapolation Distance

Diffusion theory doesn’t describe what happens at the surface of the reactor. So we imagine the neutron flux reaches zero a little beyond the physical surface. The extra distance is the extrapolation distance, d.

d = 0.7104λtr

d = 2.13D

13
New cards

Neutron Continuity Equation

accounts for everything that happens to neutrons in a volume

Rate of Change = Production - Absorption - Leakage


<p>accounts for everything that happens to neutrons in a volume</p><p>Rate of Change = Production - Absorption - Leakage</p><p></p>
14
New cards

Steady State Assumption

1) Start with continuity

2) Apply steady state (dn/dt = 0)

3) sub into Fick’s Law

4) Rearrange to solve

∇^2Φ - Φ/L² = -S/D

15
New cards

Infinite Plane Source

emits neutrons from the plane @ x = 0, infinite in the y and z direction

Derivation:

1) Start with one dimensional diffusion equation is d²Φ/dx² - Φ/L²=0

2) General Solution Φ(x) Ae^-x/L + Ce^x/L

3) Take boundary since the flux must stay finite and approach 0 as x → infinite. Therefore Φ(x) = Ae^-x/L elimantes

4) To find A consider small pillbox on plane. This plane cuts the block in half. There is only net flow through front faces, so the net flow of neutrons out is 2J(x), if we shrink more we get lim x→0 J(x) S/2.

5) Plug in Fick’s Law →Φ =Ae^-x/L → J = -D d/dx (Ae^-x/L) → J= DA/: e^-x/L

6) Evaluate limit and plug in A

Φ = SL/2D e ^ - |x|/L

16
New cards

Point Source

emits neutrons from one location in an infinite medium, neutrons spread outward in all directions, so use spherical coordinates

1) Start with the diffusion equation → delta² Φ - Φ/L²= 0

2) Use spherical Laplacian, only need r direction → delta²Φ = 1/r² d/dr (r² dΦ/dr)

3) Sub into diffusion equation → 1/r² d/dr (r² dΦ/dr) - Φ/L² = 0

4) Change variables w = rΦ, Φ = w/r

5) start with r² dΦ/dr, use quotient rule → dΦ/dr = 1/r dw/dr - w/r², multiple by r² to get r² dΦ/dr = r dw/dr - w

6) Differentiate again d/dr(r dw/dr - w) = r d²w/dr²

7) Sub into spherical equation 1/r²(r d²w/dr²) - w/r/L² = 0, multiply by r d²w/dr²

8) General Equation w = Ae ^-r/L + Ce^r/L since w = rΦ, Φ = (Ae^-r/L + Ce^r/L)/r

9) Apply boundary condition → flux must approach 0 as r approaches infinity so only Φ( r) = (Ae^-r/L) r

10) Solve for A using “tiny sphere” around the source,

Sphere surface area → 4pi r²

lim 4 pi r² Jr = S →apply ficks law Jr = -D dΦ/dr = Φ® = (Ae-r/L )/ r

11) Differentiate → dΦ/dr = -Ae^-r/L(1/Lr + 1/r²) → Jr = DAe^-r/L(1/Lr + 1/r²)

12) multiply by sphere surface area and take limit as r → 0

13) Plug back in

Φ( r) = s/4pi Dr e^-r/L

17
New cards

Infinite Bare Slab

physical boundaries are x = -a x = +a

Solve only the positive side 0 < x < a

1) Start with diffusion equation → delta² Φ - Φ/L² = 0

2) Apply cartesian, only care about x direction → d²Φ/dx² - Φ/L² = 0

3) General Solution → Φ(x) = Ae-x/L + Ce^x/L

apply boundary conditions; however it can;t go to 0, so we add extrapolation distance Φ(a+d) = 0

Ae^ - a+d/L + Ce ^ a+d/L = 0 → C = -Ae^-2(a+d)/L

4) Rewrite equation → Φ = A[e^-x/L - e ^x/L - 2(a+d)/L]

5) Use pillbox method to find A. There is no net flow through the side edges since infinity, using same method as sphere we get

lim x → 0 J(X) = S/2

6) Use Fick’s Law → J = AD[(e^-x/L)/L - (e ^x/L - 2(a+d)/L)/L]

7) Evalute at lim x → 0 J(X) = S/2 → AD[ 1/L + (e^-2(a+d)/L)/L] = s/2 so A = S/2D[ 1 + e^ -2(a+d)/2]^-1

8) Plug in new A value = Φ = SL/2D (9e^-x/L - e^x/L -2(a+d)/L) 1 + e^-2(a+d)/L for x > 0

for symmetric x is in absolute value

9) multiply everything by e^(a+d)/L

10) Plug in Hyperbolic sinh and cos h

sinh(x) = e^x-e^-x/2 cosh(x) = e^x + e^-x/2

Φ = SL/2D sinh((a+d - |x|)/L) / cosh((a+d)/c)

18
New cards

Checklist for deriving

1) Draw the system

2) Define regions and assign them equations

3) reduce to proper coordinate system

4) write general solution

5) use boundary conditions to solve


19
New cards

Downscatter

A neutron loses energy and moves from a faster group to a slower group

N

∑ ∑g → hΦ

h+g+1

20
New cards

Upscatter

Neutron gains energy and moves from a slower group to a faster group

g-1

∑∑ h-g Φh

h=1

21
New cards

One group model

All neutrons are treated as belonging to one group, with no other groups to scatter into or out of

D∇Φ - ∑ aΦ + s = 0

For one group reactor equation

-DB²Φ - ∑aΦ + 1/k v ∑f Φ = 0

22
New cards

Multigroup diffusion equation

leaking - Absorption- down scatter out - down scatter in + source = 0

Dg∇²Φg - ∑a(E)Φ E - ∑ ∑g → hΦ - ∑∑ h-g Φh + Sg = 0

23
New cards

Produced in a group

Sg

24
New cards

Absorption

∑a(E)Φ ∑

25
New cards

Leakage

Dg∇²Φg

26
New cards

Explain a 2 group model

group 1: fast group group 2: slower group

-Neutrons born in group 1

-Neutrons downscatter from group 1binto group 2

-No neutrons scatter back from group 2 into group 1

27
New cards

Explain a three group model

Group 1 → has fission products + loses neutron through absoprtion + downscatter

Group 2 → Gains neutrons from 1, loses neutrons through absorption + downscatter to 3

Group 3 → Gains neutrons from 1 + 2, loses neutrons through absorption

28
New cards

Thermal Neutron Flux Φt

Assumes neutrons follow a Maxwellian energy distribution

Neutrons have a range of thermal energies + velocities

total thermal flux is found by integrating over the thermal energy distribution

29
New cards

2200 m/s flux Φ

Assumes all neutrons are at 2200 m/s speed

Corresponds to a neutron energy of 0.0255 eV

Standard referance To = 273.61 k

relationship between

Φt/Φc = square root T/To → Φo = ΦT square root To/T

30
New cards

Buckling

Describes how quickly neutron flux curves or changes through a reactor.

It’s used to compare neutron production and absorption properties of the material w/ leakage caused by the reactor’s geometry

31
New cards

Material Buckling

describes the neutron behavior of the fuel-moderator material

For one group reactor

Bm² = k∞ - 1 /L² → k∞/L²B² + 1 = 1

L²= D/macroscopic absorption cross section

32
New cards

Geometric Buckling

describes shape and size of the reactor

B² 1/D [1/k v Σf - Σa]

General equation:

∇²Φ + B²Φ = 0 (represents curvature of flux)


For a bare slab w/ extrapolated half-thickness a+d: Bg² = (pi/2(a+d))²

For a sphere w/ extrapolated radius R + d: Bg²= (pi/(r+d))²

For a cylinder: B²g = (2.405/R+d)² + (pi/ H +2d)²

33
New cards

Criticality Relationship for Buckling

B²m = B²g


34
New cards

What happens to buckling if slab gets thicker

Neutrons have more material around them

so fewer neutrons leak out

Geometric buckling decreases

non-leakage probability increases

Increases in slab thickness → increase in criticality

35
New cards

Reflector

A material placed around the reactor core to scatter neutrons backs into the core. Without reflector, some neutrons escape core and are lost


core = ∇²Φc+ B²Φc = 0

reflector = ∇²Φr - (1/L²r)Φr = 0


36
New cards

Reactor Savings

reduction in the critical core dimension due to reflector

δ = R bare - R reflected

37
New cards

Two Region Reactor

region 1: reactor core

  • contains fuel

  • neutrons are produced by fission

  • has its own diffusion coefficient and material properties

region 2: reflector

  • surrounds the core

  • does not contain the core’s fission source

  • neutrons enter it from the core and scatter back towards the core


38
New cards

Boundary Conditions to know

At center → flux must remain finite

at the core reflector interface → flux and current are continuous

at the outer extrapolated reflector boundary → flux is 0

39
New cards

Homogenous Reactor

Fuel and moderator are evenly mixed together

Reactor can be treated as 1 uniform material

40
New cards

Heterogenous Reactor

Fuel and moderator are physically separated

Fuel is commonly contained in fuel rods or plates

Neutron flux can be different in the fuel and moderator

41
New cards

Optically thin fuel

Neutrons are less likely to have multiple collisions in the fuel rod

42
New cards

Optically thick fuel

Neutrons may undergo multiple collisions inside the fuel, so the fuel and moderator must be treated separately

43
New cards

Thermal disadvantaged factor

describes the difference between the thermal neutron flux in the moderator and the fuel.

commonly → phi mod/ phi fuel

*If larger fraction of neutrons are absorbed in the moderator instead of fuel, then fewer neutrons contribute to fission

44
New cards

RMBK

  • soviet designed boiler water reactor

  • Moderator: graphite

  • Coolant: light water

  • uses pressure tubes rather than 1 large pressure vessel

  • can be refueled while operating


45
New cards

CANDU

  • Canadian designed reactor

  • Moderator: heavy water

  • Coolant: heavy water

  • Fuel: Natural Uranium

  • horizontal pressure tubes

  • can be refueled while operating


46
New cards
47
New cards

AGR_ Advanced Gas-Cooled reactor(Gen ii)

  • British reactor

  • Moderator: graphite

  • Coolant: Carbon Dioxide

  • fuel: uranium oxide

  • = 40% thermal efficiency


48
New cards

AP1000(Gen iii+)

  • westinghouse pressurized water reactor

  • Moderator: ordinary light water

  • Coolant: ordinary light water

  • passive safety features

  • steel containment structure acts as ultimate heat sink for decay heat

  • steam can condense on containment walls, natural circulation helps remove heat

  • reduced piping


49
New cards

ESBWR - Economic Simplified boiling water reactor(Gen iii+)

  • Boiling water reactor design

  • Moderator: light water

  • Coolant: light water

  • natural circulation

  • reduces reliance on pumps + piping


50
New cards

VHTR - Very high temperature reactor (Gen iv)


  • Moderator: graphite

  • Coolant: helium gas

  • fuel can be arranged in pebbles or prismatic blocks

  • High outlet temp around 700-1000

  • Stores access heat for industrial process and electricity


51
New cards

SFR - Sodium-Cooled Fast Reactor(Gen iv)

  • Fast neutron reactor

  • Moderator: none

  • Coolant: liquid sodium

  • Excellent heat-transfer properties

  • Sodium reacts violently with water so reactor has separate systems


52
New cards

MSR - Molten Salt Reactor (Gen IV)

  • moten salt as fuel carrier in designs

  • fuel can be dissolved directly in the liquid salt

  • some designs allow online fuel refueling

  • some designs use graphite moderator; others are fast-spectrum and doesn’t need a moderator

  • can have strong neg temp feedback


53
New cards

TRISO FUEL

Tri structural Isotropic fuel

TRISO particle has a small fuel kernel surrounded by multiple protective layers designed to

retain radioactive fission products

prevent the release of many fission products

provide structural protection at high temps

54
New cards

Small Modular Reactors

up to 300 MWe per molecule

can be factory-manufactured

can be transported at assembled at site

serve needed locations

55
New cards

Nuclear Fuel Cycle

  1. Uranium Recovery

  2. Milling/Yellowcake

  3. Conversion

  4. Enrichment

  5. Fuel Fabrication

  6. Reactor

  7. Spent fuel storage -pool

  8. Spent Fuel storage - dry cask

  9. reprocessing

  10. disposal


56
New cards

Countries with lots of uranium

Australia → 3.6 MT → 9% imports

Kazakhstan → 2.9 MT → 25% imports

Canada → 1.7 MT → 27% imports

U.S.A → 0.189 MT

Russia/ Uzbekistan → 11% imports

57
New cards

Enrichment classification

Depleted uranium → 0.5%

Natural Uranium → 0.72%

Low-enriched uranium → 4%

High-assay low-enriched uranium → 12%

Highly enriched uranium → 50%

Weapons Grade → 93%

58
New cards

Multiplication factor

k = neutrons produced in one generation / neutrons produced in the previous generation

k = νΣf / DB² + Σa

k∞ = vΣa, f / Σa

59
New cards

Four Factor Formula

k(infinity) = nfpE


n = reproduction factor

f= thermal utilization factor

p = resonance escape probability

E = fast fission factor

60
New cards

Non-leakage Proability

PNL = (number of neutrons absorbed) / (number of neutrons absorbers and leaked)

PNL = Σa/(Σa + DB²) → 1/(1 + B²L²)

Keff = k∞PNL

PNL = keff/k∞

PNL = 1/k∞

61
New cards

TRISO layers

  1. Porous carbon buffer — allows space for fuel swelling and fission gases.

  2. Inner pyrolytic carbon — protects the kernel and supports the coating.

  3. Silicon carbide (SiC) — major fission-product barrier.

  4. Outer pyrolytic carbon — protects and supports the particle.


Remember

Buffer → Inner carbon → SiC → Outer carbon.

62
New cards

Extrapolation Distance

d = 0.7104λtr

D = 2.13D

63
New cards

Advantages of reflector

Reduce neutron leakage

improve neutron economy

allows for smaller critical reactor core

can reduce the amount of fuel needed for a specific part