1/244
Looks like no tags are added yet.
In proteins, amino acids are joined in characteristic
linear sequences through a
common amide
linkage, the peptide bond.
The amino acid sequence
of a protein constitutes its
primary structure
Peptides and Proteins molecular weight
>10,000
Peptides and Proteins are
chains (polymers) of
amino acids
Peptide synthesis: drawing

is hydrolysis or condensation more favourable and why
hydrolysis because it does not require energy
condensation requires
ATP
Peptide bond
linkage between
two amino acids
Peptide formation proceeds
through
multi-step reactions
ATP provides energy needed
to
form a new chemical bond.
Explain how an amino acid is attached to tRNA.
acid is attached to tRNA. | First, ATP activates the amino acid by forming aminoacyl-AMP and releasing PPᵢ. Then, the amino acid is transferred to the 3′ end of tRNA, releasing AMP and forming aminoacyl-tRNA. |
What is released in each step? of using ATP to attach to tRNA
Step 1: PPᵢ (two phosphates joined together). Step 2: AMP.
What happens to the aminoacyl-tRNA?
It carries the amino acid to the ribosome, where the amino acid can be added to the growing protein chain.
Explain what happens in one round of elongation at the ribosome.
A tRNA brings a new amino acid into the A site, while the tRNA in the P site holds the growing chain. The ribosome forms a peptide bond, transferring the chain to the A-site tRNA. Then the tRNA carrying the chain moves A → P, and the empty tRNA moves P → E and exits.
What does each site do?
A (aminoacyl) receives the tRNA carrying the next amino acid. P (peptidyl) holds the tRNA carrying the growing chain before the bond forms. E (exit) is where the empty tRNA leaves.
What bond is circled in the top picture?

Right after the bond forms, which tRNA holds the whole chain?
The A-site tRNA (purple in the bottom picture). It moves to the P site when the ribosome shifts.
The peptide C−N is shorter than
an amine’s C−N bond
The peptide C−N is shorter than an amine’s C−N bond
This indicates a
resonance, or sharing of electrons
The partial double bond character prevents
rotation of C−N
the carbony, oxygen has a partial _ charge and the amide nitrogen has a partial _ charge setting up a _
negative
positive
small electrical dipole
Virtually all peptide bonds in proteins occur in this _
trans configuration
Because of their partial double-bond character, peptide C—N bonds
cannot rotate freely
Because of their partial double-bond character, peptide C—N bonds
cannot rotate freely. This keeps the entire six-atom peptide group in a
rigid planar configuration.
The peptidyl C−N linkage and the four atoms to which the C and N
are directly linked always form a
planar structure
The peptidyl C−N linkage and the four atoms to which the C and N
are directly linked always form a planar structure
as result of
the partial double bond character
the peptide back bone
of a protein can be described structurally as a
series of planes
The lack of free rotation (structural rigidity) limits the
conformations the
polypeptide backbone can adopt
The lack of free rotation helping stabilize
secondary structures such
as α-helices and β-sheets
The lack of free rotation helps guiding the
overall folding of the protein.
Which bonds can rotate, and what are φ and ψ?
φ (phi) is the angle around N–Cα. ψ (psi) is the angle around Cα–C. Rotation around these bonds lets the flat panels tilt relative to each other.
How does this affect protein folding?
Repeating patterns of φ and ψ angles give sections of the backbone shapes like α-helices and β-sheets, which hydrogen bonds help stabilize.
Oligopeptide
a few amino acids linked together (~ 10−30 residues)
Polypeptide
many amino acids linked together (~ 30−90 residues)
Protein
v
Which direction do you read a peptide sequence?
Read from the N-terminus → C-terminus. In this diagram, the N-terminus has the free amino group (NH₃⁺), and the C-terminus has the free carboxyl group (COO⁻).
What is Ser–Gly–Tyr–Ala–Leu in one-letter code?
SGYAL. Serine is first at the N-terminus, and leucine is last at the C-terminus
N-terminus
amino terminal end
C-terminus
Carboxyl-terminal end
Peptide bonds are
stable
t1/2 = _ in cells due to high _ of the _ reaction
7 yrs
delta G‡
hydrolysis
Peptides (and proteins) have their unique _ values
depending on the _.
pI
a.a. compositions
Biologically active peptides: 5
oxytocin
bradykinin
vasopressin
insulin
glucagon
Vasopressin vs Oxytocin
only have two small differences for the 9 amino acids but have very different roles (Phe vs IIe) (Arg vs Leu)
GLP-1 Produced in the 2
gut and brain
GLP‐1 Released into the circulation after
eating in proportion to the amount of food
consumed
GLP‐1 Acts on the
pancreas to release insulin
GLP‐1 Exerts _ effects
anorexigenic
GLP‐1 Linked to a reduction in _ and a suppression of_.
gastric emptying
gastric acid secretion
Both GLP-1 or GLP-1 receptor agonists shown to enhance _, reduce
_, and promote _ in humans.
satiety
food intake
weight loss
Why does natural GLP‑1 have a short half-life?
The enzyme DPP‑4 cuts the peptide bond between the second and third amino acids, removing the first two and inactivating the hormone.
How do the two changes shown help semaglutide last longer?
Changing the second amino acid makes it harder for DPP‑4 to cut. Adding a fatty acid tail helps it bind to albumin, a blood protein, so it stays in circulation longer.
Rough estimation of MW of proteins
Number of aa residues x 110
average molecular weight of amino acid
~128
molecule of water removed to form peptide bond
18
Biologically active
peptides and polypeptides
occur in a vast range of
sizes and compositions
most found aa in most proteins 4
Leu
Val
Gly
Ala
basic amino acids with a higher pI 2
Lys
Arg
Histones
basic protein with high pI and rich in Lys and Arg and negative charge
pepsin
acidic protein with low pI and no large amount of Lys and Arg because too many positive charges
Some proteins contain chemical groups other
than
amino acids
conjugated proteins
contain permanently
associated chemical
components
prosthetic group
non–amino acid part
lipoproteins contain
lipids
glycoproteins contain
sugars
metalloproteins contain
specific metals
metalloproteins and hemoprotein example
hemoglobin contains iron where the oxygen binds
1. Sequence (primary structure)
covalent linkages of amino acids (amino acid residues)
2. Secondary structure
recurring structural patterns (alpha helix)
3. Tertiary structure
3D folding of polypeptide (polypeptide chain)
4. Quaternary structure
association of separate subunits
The sequence of a protein is simply its
amino acid sequence in a
polypeptide chain
Proteins are not straight lines, but
fold into structures almost
immediately after (and during) synthesis
protein folding leads to
secondary, tertiary and quaternary structures.
The structure and function of a protein depends on
its a. a. sequence
Sequence determines
Tertiary structure (3-D structure)
Tertiary structure (3-D structure) determines
Function & Cellular location
example of protein function 5
enzymes
transport
movement
antibodies
receptors
structural
Protein sequencing Chemical methods
Edman degradation
Protein sequencing Deduced amino acid sequences from
DNA sequences
_ ← _ ← _
Protein function
3-D structure
Sequence
Protein Folding Problem
The goal is to learn, from sequence, as much information
as possible on its structure, function, and its evolutionary
history
There are 400 amino acids in this receptor protein, meaning that there
should be 1200 (_) bases associated with the _.
400 x 3
mRNA amino acid code
bioinformatics identifies
functional segments in new proteins
bioinformatics establishes _ and _ relationships to
known proteins
sequence
structural
Protein sequences help elucidate
the history of life on Earth
essential amino acid residues
conserved over
evolutionary time
less important amino acid residues
vary over
evolutionary time
why is human DNA not the exact same but similar
because you can substitute similar aa
Glu swapped with Asp
one negative charged aa for another
Val swapped for Leu
swaps one nonpolar aa for another
homologs = homologous proteins =
members of protein families
similar sequence, functions, structures
main drivin force for stability in secondary structure
hydrogen bonding
Protein structures are stabilized by
noncovalent
interactions and forces
Formation of a thermodynamically favorable structure
depends on the influences of the 4
hydrophobic effect,
hydrogen bond
ionic interactions,
van der Waals forces.
Natural protein structures are constrained by peptide bonds,
whose configurations can be described by the
dihedral
angles φ (phi) and ψ (psi)
φ (phi)
between −180 and +180 degrees
ψ (psi)
between −180 and +180 degrees
X-ray structures of small
peptides (Corey) showed partial
double-bond character in the C–N bond
partial double-bond character in the C–N bond makes the six atoms of the peptide group
coplanar and restricts
backbone rotation to φ and ψ