1/24
Looks like no tags are added yet.
An area where undeveloped land with vegetative fuels meets with human-made structures is called the: (Page 144)
A) wildland/urban interface (WUI).
B) wildland/unified interface (WUIF).
C) wildland/urban intermix (WUIX).
D) wildfire/urban interface (WFUI).
A) Wildland/urban interface (WUI).
The wildland/urban interface (WUI) is the area where undeveloped land containing natural vegetation, such as grass, brush, and trees, meets or comes into contact with human-made structures and developed areas.
These areas are at increased risk of wildfires damaging homes, buildings, and other structures.
B) Wildland/unified interface (WUIF): This is not the correct terminology used in wildland firefighting.
C) Wildland/urban intermix (WUIX): Wildland/urban intermix is a related term describing areas where homes and structures are scattered among wildland vegetation, but WUIX is not the standard abbreviation given in this question.
D) Wildfire/urban interface (WFUI): This is incorrect because the term refers to wildland, not wildfire.
Study Tip
WUI = Wildland/Urban Interface.
Think of a neighborhood built next to a forest or brush-covered hillside. When wildland vegetation meets developed areas, it's a WUI.
As you respond to an incident, make sure you're always considering __________ and what access concerns need to be taken into consideration. (Page 144)
A) the incident action plan (IAP)
B) fuels
C) radio communications
D) escape routes
D) Escape routes.
As firefighters respond to an incident, they must continually consider escape routes and access concerns. Escape routes provide a preplanned path for firefighters to reach a safety zone if conditions become dangerous.
Firefighters must identify safe ways to enter and exit the incident area and be prepared to change routes if conditions worsen.
A) The incident action plan (IAP): Provides incident objectives and strategies, but it is not the specific safety consideration paired with access concerns in this question.
B) Fuels: Affect fire behavior and spread, but they are not the primary consideration paired with access concerns here.
C) Radio communications: Are essential for coordination and safety, but they do not provide a physical route for escape.
Study Tip
Access in, escape out!
When approaching an incident, think about how you'll get to the scene safely and how you'll get out if conditions change.
A very common issue while performing structure protection is the age and creatively built __________ for access. (Page 145)
A) gates
B) bridges
C) roads
D) driveways
B) bridges
To protect a home from a wildland fire, one of the things that can be accomplished before the fire arrives is: (Page 145)
A) open all windows and doors to create access to the home from all directions.
B) move furniture toward the perimeter of the home to protect it from radiant heat transfer.
C) charge garden hoses.
D) keep woodpiles next to the home to protect the home from convective heat transfer.
C) Charge garden hoses.
Before a wildland fire arrives, homeowners or firefighters can charge garden hoses by connecting them to a water supply and pressurizing them so they are ready for use. This can help with structure protection if water remains available and conditions permit safe operations.
A) Open all windows and doors: Openings can allow embers, heat, and smoke to enter the home. Windows and doors should generally remain closed.
B) Move furniture toward the perimeter: Furniture should not be moved toward exterior walls because this does not protect the structure from radiant heat.
D) Keep woodpiles next to the home: Woodpiles are combustible and can increase the risk of fire spreading to the structure. They should be kept away from the home.
Study Tip
Remember: Prepare water, close openings, clear fuels.
Before a wildfire arrives, prepare available water supplies, close windows and doors, and move combustible materials away from the home.
An example of what to do around power lines during a wildland event is: (Page 146)
A) spray water on downed power lines to protect the vegetation from igniting.
B) do not approach or attempt to move a downed line.
C) stay in between two poles that contain a downed power line.
D) fight fire aggressively under power lines, especially when there is dark smoke or superheated gases.
B) Do not approach or attempt to move a downed line.
Downed power lines can remain energized and cause electrocution, serious injury, or death. During a wildland fire, firefighters and the public should stay well away from downed lines and report them to the appropriate utility or emergency personnel.
A) Spray water on downed power lines: Water can conduct electricity, creating a serious electrocution hazard.
C) Stay in between two poles that contain a downed power line: The area between poles is not necessarily safe; downed lines can energize the surrounding ground.
D) Fight fire aggressively under power lines: Electrical hazards require caution and coordination with the utility company, not aggressive action beneath potentially energized lines.
Study Tip
Remember: Downed wire = stay away.
Never touch or move a downed power line, and assume it is energized until qualified utility personnel confirm it is safe.
When working to prepare a structure, for added safety, make sure that your vehicle: (Page 146)
A) is off and cannot generate a spark.
B) is parked at the end of the driveway.
C) has fire shelters deployed underneath the vehicle's body.
D) is facing the direction of your escape route.
D) Is facing the direction of your escape route.
When preparing a structure for protection during a wildland fire, position your vehicle so it faces the planned escape route. This allows you to leave quickly if fire conditions worsen, reducing delays from turning around or maneuvering in a hazardous area.
A) Is off and cannot generate a spark: Reducing ignition sources can be important, but this is not the primary vehicle-positioning safety practice described.
B) Is parked at the end of the driveway: This does not guarantee a safe or quick escape.
C) Has fire shelters deployed underneath the vehicle's body: Fire shelters are not designed to be deployed underneath vehicles as a routine safety measure.
Study Tip
Remember: Park facing out.
Always position your vehicle for a quick exit, keep your escape route clear, and continually monitor changing fire conditions.
One thing that should be accomplished when dealing with hazardous materials that are present
during a wildland fire is: (Page 147)
A) approach cautiously.
B) make an access point to the area.
C) treat all placards the same for efficiency.
D) approach aggressively to make sure all fire is out.
A) Approach cautiously.
Hazardous materials (hazmat) can release toxic, flammable, or corrosive substances when exposed to fire or heat. During a wildland fire, responders should approach cautiously, identify hazards from a safe distance, observe warning placards, and notify appropriately trained hazmat personnel when necessary.
B) Make an access point to the area: Entering a hazardous area without assessing the risks could expose responders to dangerous substances.
C) Treat all placards the same for efficiency: Different placards identify different hazards and require different precautions.
D) Approach aggressively to make sure all fire is out: An aggressive approach can expose firefighters to toxic substances, explosions, or other serious hazards.
Study Tip
Remember: Hazmat = Stop, Identify, Protect.
Stop: Keep a safe distance.
Identify: Look for placards and warning signs.
Protect: Avoid exposure and request specialized resources when needed.
To think through a hazardous materials situation as it is unfolding, follow the DECIDE decision-making process. The D stands for: (Page 147)
A) decipher a response objective.
B) detect hazardous materials.
C) determine your progress.
D) decide a course of action.
B) Detect hazardous materials.
The DECIDE model is a decision-making process used to assess and respond to hazardous materials incidents. The first step, D — Detect, involves recognizing the presence or potential presence of hazardous materials.
The DECIDE process stands for:
D — Detect the presence of hazardous materials.
E — Estimate likely harm.
C — Choose response objectives.
I — Identify action options.
D — Do the best option.
E — Evaluate progress.
A) Decipher a response objective: Choosing response objectives is the C step.
C) Determine your progress: Evaluating progress is the final E step.
D) Decide a course of action: Selecting or carrying out an action occurs later in the process, not at the initial detection step.
Study Tip
Remember: DECIDE starts with Detect.
First recognize the hazard, then estimate the danger before choosing and carrying out a response.
Signs that a scene may contain a drug lab include the presence of discarded __________ and the overwhelming smell of cat urine. (Page 147)
A) bottles of ammonia
B) hay bales
C) fertilizer with charcoal
D) propane tanks with corroded valve stems
D) Propane tanks with corroded valve stems.
Discarded propane tanks with corroded valve stems, along with a strong odor resembling cat urine, can be warning signs of a possible clandestine drug lab. These environments may contain toxic chemicals, flammable vapors, and explosion hazards.
A) Bottles of ammonia: Ammonia can be associated with some chemical processes, but it is not the specific indicator described in this question.
B) Hay bales: Hay is not a characteristic indicator of a clandestine drug lab.
C) Fertilizer with charcoal: These materials have other uses and are not the specific clue being tested.
Study Tip
Remember: Unusual chemical odors + suspicious discarded equipment = potential hazmat scene.
If you suspect a drug lab, do not touch suspicious materials or enter the area. Withdraw to a safe distance and notify law enforcement or hazmat specialists.
When working around LPG tanks, make sure that there is a __________ vegetation clearance around all storage tanks. (Page 147)
A) 50-ft
B) 30-ft
C) 45-ft
D) 15-ft
B) 30-ft.
When working around LPG (liquefied petroleum gas) tanks, vegetation clearance helps reduce the risk of fire spreading to the tank. A 30-foot clearance is the expected answer for this question, helping create a defensible space around the storage tank.
__________ are the most common places where hazardous materials associated with residential structures are typically located. (Page 147)
A) Conex Containers
B) Sheds and garages
C) Outbuildings
D) Basements
B) Sheds and garages.
Sheds and garages commonly contain hazardous materials associated with residential properties, including gasoline, propane cylinders, pesticides, fertilizers, paints, solvents, and other flammable or toxic substances. During a wildland fire, these materials can create additional hazards for firefighters.
A) Conex Containers: These are storage containers that may hold hazardous materials, but they are not the most common locations associated with residential structures.
C) Outbuildings: This is a broader category that can include sheds and garages, but option B is more specific.
D) Basements: Basements may contain hazardous materials, but they are not the most common locations identified in this question.
Study Tip
Remember: Residential hazmat = sheds and garages.
When sizing up a home during a wildfire, look for fuel cans, propane tanks, pesticides, paints, and other stored chemicals that could increase fire or explosion risks.
__________ is a system of classifying structures based on defensibility and prioritizing protection to the least defensible structures first. (Page 148)
A) Structure triage
B) Tactical actions
C) Risk assessment
D) Fire danger rating
A) Structure triage.
Structure triage is the process of evaluating and classifying structures based on factors such as defensibility, fire exposure, available resources, and the likelihood of successful protection. It helps firefighters prioritize structure protection when resources are limited.
B) Tactical actions: These are specific actions taken to achieve incident objectives, not a system for classifying structures.
C) Risk assessment: Evaluates hazards and potential consequences but does not specifically refer to classifying structures for protection.
D) Fire danger rating: Measures the potential for fire occurrence and behavior under current conditions, not the defensibility of individual structures.
Study Tip
Remember: Triage = prioritize.
In structure triage, firefighters assess which structures can be defended and allocate resources accordingly. The goal is to make the safest, most effective use of available resources—not simply to protect the easiest structure first.
__________ should be considered when determining tactical actions while defending homes from a wildland fire. (Page 148)
A) Fire danger rating
B) Structure triage
C) Risk assessment
D) Fire behavior
D) Fire behavior.
Fire behavior should be considered when choosing tactical actions to defend homes during a wildland fire. Firefighters evaluate the fire's intensity, rate of spread, flame length, wind, and direction to determine whether a structure can be safely defended and which tactics are appropriate.
A) Fire danger rating: Indicates the general potential for fire activity but does not describe the immediate behavior of the fire threatening a home.
B) Structure triage: Helps prioritize which structures receive protection, but it is not the specific factor asked about here.
C) Risk assessment: Evaluates hazards and potential consequences, but fire behavior is the direct factor used to guide tactical decisions in this question.
Study Tip
Remember: Fire behavior guides tactics.
Before defending a home, ask: How fast is the fire moving? How intense is it? Where is it heading? These answers help determine the safest and most effective response.
__________ involve preparing the structure with defenses, such as gel or foam, and then defending the structure as the fire approaches. These tactics are used when you and your crew are confident that the structure can be saved from the fire. (Page 148)
A) Bump-and-run tactics
B) Anchor-and-hold tactics
C) Prepare-and-go tactics
D) Prepare-and-defend tactics
D) Prepare-and-defend tactics.
Prepare-and-defend tactics involve preparing a structure with protective measures, such as applying fire-resistant gel or foam, and then remaining to defend the structure as the wildfire approaches. These tactics are appropriate when firefighters determine that the structure can be safely defended and escape routes and safety zones are available.
A) Bump-and-run tactics: Firefighters take quick protective actions at a structure and then move on rather than staying to defend it as the fire arrives.
B) Anchor-and-hold tactics: Focus on securing a control line or position and holding it; this is not the specific structure-protection tactic described.
C) Prepare-and-go tactics: Firefighters prepare the structure but leave before the fire arrives rather than remaining to defend it.
Study Tip
Remember the difference:
Prepare-and-defend: Prepare the home and stay to defend it, if conditions are safe.
Prepare-and-go: Prepare the home and leave before the fire arrives.
Bump-and-run: Make quick protective actions and move on.
Key clue: If the question says firefighters are confident the structure can be saved and will stay to defend it, choose prepare-and-defend.
__________ involve protecting and defending a structure with large volumes of resources. This tactic is used to put out structure fires, reduce ember production, and protect structures exposed to fires. (Page 148)
A) Anchor-and-hold tactics
B) Bump-and-run tactics
C) Prepare-and-defend tactics
D) Prepare-and-go tactics
A) Anchor-and-hold tactics.
Anchor-and-hold tactics involve committing substantial firefighting resources to protect and defend a structure. Firefighters work to extinguish structure fires, reduce ember production, and protect buildings from nearby wildland fire exposure while holding a secure position.
B) Bump-and-run tactics: Firefighters make quick protective actions at structures and then move on rather than remaining to defend them.
C) Prepare-and-defend tactics: Firefighters prepare a structure and stay to defend it when conditions and resources allow, but this is not the specific tactic described as using large volumes of resources.
D) Prepare-and-go tactics: Firefighters prepare the structure and leave before the fire arrives.
Study Tip
Remember: Anchor-and-hold = commit resources and hold the position.
Look for clues such as large volumes of resources, extinguishing structure fires, and holding a defensive position. These point to anchor-and-hold tactics.
__________ involve checking inside the structure for occupants, assisting in evacuation as needed, and then leaving the scene. (Page 148)
A) Bump-and-run tactics
B) Prepare-and-defend tactics
C) Prepare-and-go tactics
D) Check-and-go tactics
D) Check-and-go tactics.
Check-and-go tactics involve checking a structure for occupants, helping with evacuation if necessary, and then leaving the area. Firefighters do not stay to defend the structure as the wildfire approaches.
A) Bump-and-run tactics: Firefighters perform quick protective actions at structures and move on to other locations.
B) Prepare-and-defend tactics: Firefighters prepare the structure and remain to defend it when conditions permit.
C) Prepare-and-go tactics: Firefighters prepare the structure for fire exposure before leaving, rather than focusing primarily on checking for occupants and evacuating them.
Study Tip
Remember: Check-and-go = check for people, then go.
The key clues are checking for occupants, assisting evacuation, and leaving the scene.
__________ involve preparing the structure with defenses, such as gel or foam, and then leaving the structure before the fire arrives. (Page 148)
A) Check-and-go tactics
B) Bump-and-run tactics
C) Prepare-and-go tactics
D) Prepare-and-defend tactics
C) Prepare-and-go tactics.
Prepare-and-go tactics involve applying protective measures, such as fire-resistant gel or foam, to a structure and then leaving before the wildfire arrives. Firefighters prepare the structure to improve its chances of surviving the fire without remaining on-site to defend it.
A) Check-and-go tactics: Focus on checking for occupants, assisting evacuation, and then leaving.
B) Bump-and-run tactics: Involve making quick protective actions at structures before moving on to other locations.
D) Prepare-and-defend tactics: Involve preparing the structure and staying to defend it as the fire approaches, when conditions are safe.
Study Tip
Remember the difference:
Prepare-and-go: Prepare the structure, then leave.
Prepare-and-defend: Prepare the structure, then stay and defend it.
Check-and-go: Check for people, then leave.
Key clue: If firefighters apply gel or foam and leave before the fire arrives, choose prepare-and-go.
__________ involve putting out spot fires ahead of the flame front to steer the fire around structures to a desired end. Structure defense preparation and perimeter control are secondary considerations when using this tactic. (Page 148)
A) Check-and-go tactics
B) Prepare-and-defend tactics
C) Prepare-and-go tactics
D) Bump-and-run tactics
D) Bump-and-run tactics.
Bump-and-run tactics involve quickly moving between structures and extinguishing spot fires ahead of the main flame front. This can help steer the fire away from structures or reduce its impact. The priority is controlling spot fires, while preparing structures and controlling the perimeter are secondary considerations.
A) Check-and-go tactics: Focus on checking structures for occupants, assisting evacuation, and leaving.
B) Prepare-and-defend tactics: Involve preparing a structure and staying to defend it as the fire approaches.
C) Prepare-and-go tactics: Involve preparing a structure with protective measures and leaving before the fire arrives.
Study Tip
Remember: Bump-and-run = move quickly and suppress spot fires.
If the question mentions extinguishing spot fires ahead of the flame front and moving between structures, think bump-and-run.
__________ are used when there is no time to employ other tactics. This tactic allows you to disengage and retreat to a safety zone and stay there until the fire has passed and it is safe to reengage. (Page 148)
A) Check-and-go tactics
B) Prepare-and-defend tactics
C) Patrol tactics
D) Fire front following tactics
D) Fire front following tactics.
Fire front following tactics are used when there is insufficient time to implement other structure-protection tactics. Firefighters disengage, retreat to a designated safety zone, and remain there until the fire front passes and conditions are safe enough to resume operations.
A) Check-and-go tactics: Involve checking structures for occupants, assisting with evacuation, and leaving.
B) Prepare-and-defend tactics: Involve preparing a structure and remaining to defend it when conditions permit.
C) Patrol tactics: Generally involve monitoring an area or checking for remaining hazards, rather than retreating to a safety zone ahead of an approaching fire front.
Study Tip
Remember: Fire front following = retreat, shelter, then reassess.
If there is no time for other tactics, firefighter safety comes first. Retreat to a safety zone and wait until the fire passes and it is safe to reengage.
__________ can be used before and after a flame front to monitor an area for potential or remaining threats to structures. (Page 148)
A) Prepare-and-defend tactics
B) Patrol tactics
C) Fire front following tactics
D) Check-and-go tactics
B) Patrol tactics.
Patrol tactics are used before and after a wildfire's flame front passes to monitor an area for potential or remaining threats to structures. Firefighters look for spot fires, smoldering materials, and hidden ignition sources that could cause a structure to catch fire.
A) Prepare-and-defend tactics: Involve preparing a structure and staying to defend it as the fire approaches.
C) Fire front following tactics: Involve retreating to a safety zone when there is insufficient time for other tactics, then reengaging when safe.
D) Check-and-go tactics: Focus on checking for occupants, assisting with evacuation, and leaving the scene.
Study Tip
Remember: Patrol = monitor and check.
If the question mentions watching an area for threats before or after the flame front passes, choose patrol tactics.
A(n) __________ is a stand-alone, defensible structure that requires little to no action to protect it. (Page 148)
A) high-risk structure
B) extreme-risk structure
C) low-risk structure
D) moderate-risk structure
C) low-risk structure
A low-risk structure is a stand-alone, defensible building that requires little or no additional action to protect it from a wildland fire. Its location, surrounding vegetation, and construction may make it more likely to survive without significant firefighting resources.
High-risk structure: Has significant hazards or vulnerabilities that make protection more difficult.
Extreme-risk structure: Faces very severe fire exposure or conditions that make safe protection extremely difficult.
Moderate-risk structure: Has some vulnerabilities and may require additional preparation or protection.
Study Tip
Remember the risk scale: Low → Moderate → High → Extreme.
The lower the risk, the more defensible the structure is and the fewer resources it generally needs.
A(n) __________ is considered non-defensible. You will be unable to establish a safety zone. Tactical actions: Prepare and go, bump and run, possibly fire front following. (Page 149)
A) low-risk structure
B) extreme-risk structure
C) high-risk structure
D) moderate-risk structure
C) high-risk structure
A(n) __________ is non-defensible. You will be unable to establish a safety zone. (Page 149)
A) high-risk structure
B) low-risk structure
C) extreme-risk structure
D) moderate-risk structure
C) Extreme-risk structure.
An extreme-risk structure is considered non-defensible when firefighters cannot establish a safe safety zone or safely protect the building from the approaching wildfire. Firefighter life safety takes priority over saving the structure.
A) High-risk structure: Presents significant hazards but may still be defensible under certain conditions.
B) Low-risk structure: Is generally defensible and requires little to no additional protection.
D) Moderate-risk structure: Has some vulnerabilities but may be defensible with appropriate preparation and resources.
Study Tip
Remember: Extreme = non-defensible.
If the question specifically says there is no way to establish a safety zone, choose extreme-risk structure.
When prepping the exterior of a structure, remove all dead fuels a minimum of __________ from a structure. (Page 149)
A) 15-ft
B) 20-ft
C) 10-ft
D) 30-ft
C) 10-ft.
When preparing a structure for a wildland fire, remove dead vegetation and other combustible fuels at least 10 feet from the structure to reduce the chance of flames or embers igniting nearby materials.
When prepping the exterior of a structure, limb up all trees __________ (Page 150)
A) 10 to 12 ft
B) 3 to 5 ft
C) 5 to 8 ft
D) 8 to 10 ft
C) 5 to 8 ft