1/53
Comprehensive review flashcards covering Chapter 8 practice question bank topics: enzyme catalysis, steady-state and pre-steady-state kinetics, Michaelis–Menten parameters, inhibition modes, cooperativity, catalytic mechanisms, and Marcus electron-transfer theory.
How does a biocatalyst affect a reversible reaction and its equilibrium position?
Both the forward and reverse directions accelerate while the equilibrium position remains unchanged.
When an enzyme increases a reaction rate by a large factor without changing the equilibrium constant, what parameter has changed?
The activation free-energy barrier was reduced.
What are the physiological roles of carbonic anhydrase and superoxide dismutase (SOD)?
Carbonic anhydrase catalyzes CO2/bicarbonate interconversion, while SOD catalyzes superoxide dismutation.
If a protein binds a substrate tightly but never accelerates product formation, what does this indicate about binding and catalysis?
Binding alone does not establish catalytic activity; catalysis requires acceleration of a chemical reaction.
Which property most directly distinguishes a true catalyst from a stoichiometric reagent?
One catalyst molecule supports multiple turnovers without net consumption.
In an assay measuring TIM activity coupled to GAPDH and NADH, what does a faster decrease in A340 indicate?
Faster TIM-linked conversion reported indirectly by NADH consumption.
In an acetylcholinesterase assay using thioacetylcholine and DTNB, which signal directly indicates product formation?
The appearance of yellow TNB measured by absorbance.
Which measurement is most appropriate for a radiometric chloramphenicol acetyltransferase (CAT) assay?
Radioactivity associated with the extracted labeled acetylated product.
Which analytical method is being used when a researcher continuously tracks enzyme-dependent oxygen consumption over time?
An oxygen-electrode assay measuring dissolved O2 change.
If an enzymatic product becomes fluorescent only after a pH-quenching step, how can it be analyzed?
The product can be quantified from fluorescence after appropriate quenching and calibration.
If an assay reaction changes absorbance by 0.30 per minute, what is required to convert that slope into concentration per time?
An appropriate absorbance-to-concentration relationship or calibration curve (such as the Beer–Lambert law).
If a substrate and product differ in molecular size but neither is chromogenic, which assay method can separate and quantify them?
A gel-based assay tracking differential migration.
During steady-state catalysis, what does the condition dtd[ES]≈0 signify?
The enzyme–substrate complex (ES) forms and breaks down at approximately equal rates while product accumulates.
Why are initial velocities (v0) commonly used to estimate Michaelis–Menten parameters?
Because substrate depletion and product accumulation are initially minimal, reducing complications from reverse reactions and product inhibition.
An enzyme has Vmax=120μM/min and Km=3mM. What is the reaction velocity (v) at [S]=6mM?
80μM/min (v=3+6120×6=80μM/min).
At what substrate concentration does a Michaelis–Menten enzyme achieve 50% of its Vmax?
[S]=Km
When substrate concentration [S] is far below Km, what approximate rate equation describes reaction velocity?
The rate is approximately (KmVmax)[S], which is directly proportional to [S].
When [S] is much greater than Km, what is the effect of doubling [S] on reaction rate?
It causes little further increase because the reaction rate v is already near Vmax.
An enzyme exhibits Vmax=60μM/s with an active-site concentration of 0.20μM. What is its turnover number (kcat)?
300s−1 (kcat=[E]totalVmax=0.2060=300s−1).
Two enzymes have identical kcat values, but their Km values are 2μM and 10μM. Which is more catalytically efficient at low [S]?
The enzyme with Km=2μM, because its specificity constant (kcat/Km) is greater.
What is the most accurate definition of Km in a general Michaelis–Menten mechanism?
Km is the substrate concentration giving half-maximal velocity (Vmax/2), not necessarily a pure dissociation constant.
What do the y-intercept and x-intercept represent on a Lineweaver–Burk double-reciprocal plot?
The y-intercept represents Vmax1 and the x-intercept represents −Km1.
Which inhibition type increases apparent Km without altering Vmax, yielding double-reciprocal lines that share a common y-intercept?
Competitive inhibition.
What Lineweaver–Burk pattern results when an inhibitor binds exclusively to ES, decreasing both apparent Km and Vmax by identical factors?
Parallel double-reciprocal lines (characteristic of uncompetitive inhibition).
What Lineweaver–Burk pattern is observed when an inhibitor binds E and ES with equal affinity, reducing Vmax without altering Km?
Lines that intersect at the exact same point on the x-axis (−Km1), representing pure noncompetitive inhibition.
Which experimental finding most strongly distinguishes irreversible inhibition from standard competitive inhibition?
Enzyme activity remains suppressed even after removing free inhibitor, reflecting persistent or covalent inactivation.
In the presence of a competitive inhibitor with Ki=10μM and [I]=10μM, what is the apparent Km if the uninhibited Km=5μM?
10μM (Km,app=Km(1+Ki[I])=5×(1+1010)=10μM).
What mathematical plot is best suited to analyze a multisubunit enzyme that exhibits a sigmoidal v versus [S] curve?
A Hill plot graphing log(Vmax−vv) against log[S].
What does a Hill plot slope (nH) of 2.1 directly indicate about an enzyme?
It indicates positive cooperativity, where nH serves as a phenomenological measure of cooperative binding.
How should a Hill slope (nH) of approximately 1 across the tested substrate range be interpreted?
The data demonstrate no detectable cooperativity under those conditions.
How is an ordered sequential Bi–Bi reaction mechanism defined?
Both substrates bind in a mandatory sequence before any product is released, forming a central ternary complex.
What sequence of events distinguishes a ping-pong Bi–Bi enzyme mechanism?
The first substrate binds and the first product leaves, producing a modified enzyme intermediate (E′), before the second substrate binds.
When varying substrate B at several fixed concentrations of substrate A, what reciprocal plot pattern is diagnostic of ping-pong kinetics?
A family of approximately parallel double-reciprocal lines.
What does a Bi–Uni kinetic designation describe?
An enzymatic reaction in which two substrates react to form a single product.
In a multisubstrate enzyme kinetic assay, why is it standard practice to keep all substrates except one at large, saturating excess?
To maintain the non-varied substrates at effectively constant concentrations, permitting pseudo-uni-substrate Michaelis–Menten analysis.
Which experimental approach is most suitable for detecting rapid, transient pre-steady-state catalytic steps?
Rapid-mixing techniques under non-equilibrium conditions, frequently using high enzyme concentrations for single-turnover evaluation.
In stopped-flow kinetics, what does a rapid product burst followed by a slower linear steady-state phase indicate?
The chemical transformation step is rapid, while a subsequent step (such as product release) limits repeated turnover.
For the association reaction E+S→ES where [S]≫[E], why does substrate binding follow pseudo-first-order kinetics?
Because [S] is in large excess and changes negligibly during the reaction, making the observed rate constant kobs=k1[S] effectively constant.
Which pre-steady-state technique rapidly stops an enzyme reaction at defined millisecond intervals using chemical agents?
Rapid-quench-flow mixing followed by chemical quenching.
What time course describes reactant concentration for a single-step irreversible conversion A→B governed by first-order kinetics?
An exponential decrease over time ([A]t=[A]0e−kt).
What kinetic consequence occurs when an active site preferentially binds and stabilizes the transition state relative to the substrate?
The activation free-energy barrier (ΔG‡) decreases, thereby accelerating the reaction rate.
Which catalytic mechanism is illustrated when an enzyme positions two substrates precisely in an active site to react?
Proximity/orientation catalysis (or intramolecular catalysis), which dramatically elevates their effective local concentration.
An active-site histidine removes a proton from a substrate and subsequently returns a proton during product formation. What strategy is this?
General acid–base catalysis.
How does covalent catalysis accelerate an enzymatic reaction without permanently altering the catalyst?
A nucleophile on the enzyme forms a transient covalent adduct that provides an alternative lower-energy pathway, and subsequent hydrolysis regenerates the free enzyme.
Which catalytic strategy is utilized when a positively charged amino acid residue stabilizes developing negative charge in the transition state?
Electrostatic catalysis.
According to the textbook chapter, approximately what rate acceleration factor is provided by simple proximity effects?
102 to 103 fold.
Why does a chiral enzyme active site distinguish between two enantiomers of a chiral substrate?
The two enantiomers interact with the chiral active site to form distinct diastereomeric enzyme–substrate complexes that differ in stability and geometry.
According to electron-transfer theory, which four primary factors dictate the rate of electron transfer between biological redox centers?
Distance, electronic coupling, driving force (−ΔG∘), and reorganization energy (λ).
In Marcus theory, what physical process does the reorganization energy (λ) describe?
The energy needed to rearrange the nuclear coordinates of both the redox centers and the surrounding solvent environment to accommodate electron transfer.
What is the Marcus inverted region in biological electron transfer?
The kinetic regime where increasing the thermodynamic driving force (−ΔG∘) beyond the reorganization energy causes the electron-transfer rate to decrease.
How does increasing the donor–acceptor distance affect biological electron-transfer kinetics, all else being equal?
Electronic coupling typically weakens exponentially with distance, causing the electron-transfer rate to decrease.
In the Marcus rate formula kET=(ℏ2π)∣TDA∣2(FC), what does the term ∣TDA∣2 represent?
The electronic coupling matrix element between the donor and acceptor states.
In the electron-transfer equation kET=(ℏ2π)∣TDA∣2(FC), what does the Franck–Condon factor (FC) describe?
The overlap of nuclear and vibrational wavefunctions between the initial and final states during electron transfer.
Which group of prosthetic groups and cofactors is prominently featured as biological electron-transfer centers?
Hemes, iron–sulfur (Fe–S) clusters, and flavins.