1/42
Looks like no tags are added yet.
What minimizes radiation exposure to workers and patients?
health physics
What does health physics provide protection for?
occupational radiation
What does ALARA stand for?
as low as reasonably achievable
What are the cardinal rules of protection?
time, distance, shielding
Dose is directly related to the amount of _____ and ______
time, exposure
The time you spend near radiation should be _______
as short as possible
What is the equation for exposure
exposure = exposure rate x exposure time
2.5 mGya / hr x 30min/60min = ?
1.25 mGya
50 mGya x 30min/60min per hour = ?
25 mGya
75 mGya x 90min/60min per hour =
112.5 mGya
When you are using radiation, you should always _______ your distance
maximize
As the distance between the source and the object increases, the exposure _______
decreases
What is the term used to identify the source of radiation?
point source
What is the point source in fluoroscopy examination?
the patient
What is the point source in general radiography examinations?
the tube
What can you use to determine how much radiation exposure you are getting?
inverse square law
The inverse square law states that as the distance increases, the amount of exposure ________
decreases
What is the formula for the Inverse Square Law?
I1/I2 = D2^2/D1^2
2.5/x = 70^2/50^2 x = ?
1.275 mGya
If you double your distance, you will cut intensity to _______ the original amount
1/4
6/x = 20^2/40^2 x = ?
24
The amount of protective barrier reduces ______ of the radiation
intensity
What refers to the thickness of absorbing material to reduce X-ray intensity to one-half its original intensity?
Half-Value Layer
If your original intensity is 30 mGya, how many HVLs are needed to get your beam to less than 2 mGya?
Start with 25 mGya; what is left after 2 HVLs?
After 3 HVLs, what percentage of radiation has been absorbed?
Start with 100 mGya; what is left after 8 HVLs?
What refers to the thickness of absorbing material to reduce X-ray intensity to one-tenth its original value?
Tenth-Value Layer
1 TVL = ? HVL
3.3
If your original intensity is 40 mGya, how many TVLs are needed before your beam is 0.004 mGya?
Start with 88 mGya; what is left after 2 TVLs?
If your original intensity is 5 mGya, what percentage of radiation will be absorbed after the third TVL?
Start with 15.6 mGya; what is left after 5 TVLs?
What type of exposure is equivalent dose based on?
whole-body exposure
What does NCRP stand for?
National Council on Radiation Protection and Measurements
Occupational Dose is less than _____ of the monitor dose?
10%
What are the three possible terrorism devices?
RED, RDD, IND
What does RED stand for?
Radiation Exposure Device
What does RDD stand for?
Radiologic Dispersal Device
What does IND stand for?
Improvised Nuclear Device
Which device is a sealed source of radioactive material that directly exposes people?
Radiation Exposure Device (RED)
Which device is a bomb that explodes and disperses radioactive contamination over a large area?
Radiologic Dispersal Device (RDD)
Which device contains nuclear material that can produce nuclear explosion?
Improvised Nuclear Device (IND)