1/91
Looks like no tags are added yet.
Amount of water in a material, expressed as a percentage of its weight.
Moisture Content (MC)
Direct measurement of actual water content.
Primary Methods
Weigh sample, dry it, and weigh again.
Oven Method
Conventional oven at 105°C; commonly used for solids.
Air Oven
Reduced pressure; suitable for heat-sensitive samples.
Vacuum Oven
Gentle heating over a water bath.
Water Oven
Uses mineral oil; 190°C for paddy and 200°C for corn.
Brown-Duvel Distillation
Uses toluene; boiling point approximately 111°C.
Toluene Distillation
Desiccant absorbs moisture evaporated from the sample.
Desiccant Method
Determines MC from changes in relative humidity.
Hygrometric Method
Water reacts with chemicals to produce a measurable product.
Chemical Method
CaC₂ reacts with water to produce acetylene gas.
Calcium Carbide Method
Indirect estimation using other physical properties.
Secondary Methods
Measures changes in electrical resistance/conductivity; example: Universal Moisture Tester (UMT).
Electrical Resistance
Measures capacitance changes; examples: MOTOMCO and DOLE moisture meters.
Dielectric Method
Moisture content at which the material is in equilibrium with surrounding air; no net moisture gain or loss.
EMC
Material loses moisture to the surrounding air.
Material MC above EMC
Material absorbs moisture from the surrounding air.
Material MC below EMC
Higher RH generally increases EMC.
Relative Humidity
Higher temperature generally decreases EMC in the simplified relationship given in the reviewer.
Temperature
Relative humidity, temperature, and type of material.
Factors Affecting EMC
Study of thermodynamic properties of air-water vapor mixtures.
Psychrometry
Actual air temperature measured using an ordinary thermometer.
Dry-Bulb Temperature (Tdb)
Temperature measured using a thermometer with a wet wick; indicates evaporative cooling.
Wet-Bulb Temperature (Twb)
Temperature at which air becomes saturated and condensation begins.
Dew Point Temperature (Tdp)
Ratio of actual water vapor pressure to saturation vapor pressure at the same temperature.
Relative Humidity (RH)
Mass of water vapor per kg of dry air.
Humidity Ratio (W)
Volume occupied per kg of dry air.
Specific Volume of Moist Air
Total heat content (sensible + latent heat).
Enthalpy of Moist Air
Dry-bulb temperature increases; humidity ratio remains constant.
Sensible Heating
Dry-bulb temperature decreases; humidity ratio remains constant.
Sensible Cooling
Moisture increases without heat exchange; wet-bulb temperature remains approximately constant.
Adiabatic Humidification
Moisture and heat are added; enthalpy increases.
Non-Adiabatic Humidification
Air temperature and moisture content both decrease.
Cooling and Dehumidification
Two air streams with different temperatures and humidity ratios combine.
Mixing of Air Streams
Graphical representation of air-water vapor properties.
Psychrometric Chart
Depend on the amount or size of the system; examples: mass, volume, total energy, total enthalpy.
Extensive Properties
Independent of system size; examples: temperature, pressure, density, specific heat.
Intensive Properties
If two systems are each in thermal equilibrium with a third system, they are in equilibrium with each other. Defines temperature.
Zeroth Law
Energy cannot be created or destroyed; only transformed.
First Law
Entropy of an isolated system increases; energy conversion is not 100% efficient.
Second Law
Entropy of a pure crystalline substance approaches zero as temperature approaches absolute zero.
Third Law
Relates pressure, volume, temperature, and amount of gas.
Ideal Gas Law
Temperature must be expressed in Kelvin for ideal gas calculations.
Absolute Temperature
No heat transfer
Adiabatic
Constant temperature
Isothermal
Constant pressure
Isobaric
Constant volume
Isochoric / Isometric
Constant entropy. Reversible adiabatic process.
Isentropic
Liquid at boiling point, ready to vaporize; quality (x=0).
Saturated Liquid (SL)
Vapor at condensation point; quality (x=1).
Saturated Vapor (SV)
Liquid and vapor coexist; (0<x<1).
Saturated Mixture
Liquid below saturation temperature.
Subcooled / Compressed Liquid
Vapor above saturation temperature.
Superheated Vapor
Fraction of vapor mass in a saturated liquid-vapor mixture.
Quality (x)
Absorbs heat; solid → liquid.
Melting / Fusion
Releases heat; liquid → solid.
Freezing / Solidification
Absorbs heat; liquid → vapor.
Vaporization / Boiling
Releases heat; vapor → liquid.
Condensation
Absorbs heat; solid → vapor.
Sublimation
Releases heat; vapor → solid.
Deposition
Heat transfer through a material by molecular interaction; common in walls, pipes, and food.
Conduction
Heat transfer through the movement of fluids (liquids or gases).
Convection
Fluid movement caused by a fan or pump.
Forced Convection
Fluid movement caused by density differences due to temperature changes.
Natural Convection
Heat transfer through electromagnetic waves; does not require a medium.
Radiation
Surface property ranging from 0 to 1.
Emissivity
Conduction.
Heat transfer through a solid wall?
Convection.
Heat transfer through moving air or water?
Radiation.
Heat transfer without a medium?
Forced convection.
Heat transfer using a fan or pump?
Natural convection.
Heat transfer caused by density differences?
Fourier's Law.
Which law describes conduction?
Newton's Law of Cooling.
Which law describes convection?
Stefan-Boltzmann Law.
Which law describes radiation?
Kelvin.
What temperature unit is required in radiation calculations?
Removal of moisture through heat and mass transfer.
Drying
Product temperature increases; drying rate rises from zero toward maximum.
Initial Warming-Up Period
Surface is fully saturated; evaporation occurs like free water; drying rate is approximately constant and maximum.
Constant Rate Period
Surface becomes partially dry; drying rate gradually decreases.
First Falling Rate Period
Bound water remains; internal moisture diffusion controls drying; rate drops sharply toward zero.
Second Falling Rate Period
No net moisture movement; drying rate approaches zero.
Equilibrium Moisture Content
Shows how moisture content decreases and helps estimate total drying time.
MC vs. Time Graph
Shows how fast moisture leaves the product.
Drying Rate vs. Time Graph
Mainly controlled by air temperature, RH, and velocity.
Constant Rate Control
Mainly limited by internal moisture resistance.
Falling Rate Control
Must supply sufficient heat for maximum evaporation.
Heater Requirement
Maintains the required air velocity.
Fan/Blower Requirement
Intermittent stopping of drying to improve moisture distribution, grain quality, and drying efficiency.
Tempering
Wastes energy when drying continues beyond the required moisture condition.
Overdrying
Prefer tempering or multistage drying.
Short Constant Rate + Long Falling Rate
High-airflow continuous-flow dryers are more efficient.
Long Constant Rate + Short Falling Rate