1/26
Looks like no tags are added yet.
Current
I (current) = ΔQ (charge passing) / Δt (time interval)
Ohm's law
V (voltage) = I (current) × R (resistance)
Resistance of a wire
R (resistance) = ρ (resistivity) × L (wire length) / A (cross-sectional area)
Wire cross-section
A (area) = π (3.14) × d² (diameter squared) / 4
Resistance vs temperature
R (resistance) = R0 (resistance at T0) × [1 + α (temperature coefficient) × (T (temperature) − T0 (reference temperature))]
Electric power
P (power) = I (current) × V (voltage)
Power forms
P (power) = I² (current squared) × R (resistance) = V² (voltage squared) / R (resistance)
Electrical energy
E (energy) = P (power) × t (time)
emf
electromotive force, battery voltage
Terminal voltage
Vab (terminal voltage) = ε (emf) − I (current) × r (internal resistance)
Resistors in series
R (total resistance) = R1 (resistor 1) + R2 (resistor 2)
Resistors in parallel
1/R (inverse total resistance) = 1/R1 (inverse resistor 1) + 1/R2 (inverse resistor 2)
Series vs parallel circuits
series shares current and adds resistance, parallel shares voltage
Kirchhoff's junction rule
ΣIin (total current in) = ΣIout (total current out)
Kirchhoff's loop rule
ΣΔV (sum of voltage changes) = 0 around any closed loop
RC
resistor and capacitor circuit
RC time constant
τ (time constant) = R (resistance) × C (capacitance)
RC discharge
V (voltage) = V0 (initial voltage) × e^(−t (time) / RC (time constant))
RC charging
V (voltage) = V0 (final voltage) × (1 − e^(−t (time) / RC (time constant)))
Time to reach a voltage
t (time) = −RC (time constant) × ln(V (target voltage) / V0 (initial voltage))
AC
alternating current
rms voltage
Vrms (rms voltage) = V0 (peak voltage) / √2
rms current
Irms (rms current) = I0 (peak current) / √2
Capacitive reactance
XC (capacitive reactance) = 1 / (2π × f (frequency) × C (capacitance))
Impedance of resistor and capacitor in series
Z (impedance) = √(R² (resistance squared) + XC² (reactance squared))
AC Ohm's law
Vrms (rms voltage) = Irms (rms current) × Z (impedance)
Average AC power
Pavg (average power) = Irms² (rms current squared) × R (resistance)