1/38
Purdue ME 200 Exam 1 Review
Common Assumptions for Solving
Typically applicable to all
Closed system (m = 0)
No friction
Quasi-equilibrium (QSE)
∆KE = ∆PE = 0
Rarer applications
Polytropic process
Ideal gas
Incompressible fluid
What is an extensive property?
Properties that depend on the size of the system
What is an intensive property?
Properties that don’t depend on the size of the system
2 intensive properties can be used to identify a state
Classify the following into intensive/extensive properties
Mass
Temperature
Pressure
Volume
Internal Energy (U)
Density
Specific Heat Capacity
Mass - E
Temperature - I
Pressure - I
Volume - E
Internal Energy (U) - E
Density - I
Specific Heat Capacity - I
Signs of Work & Heat Transfer
Work
(+) → system performing work
(-) → system has work performed on it
Heat
(+) → system has heat transferred to it
(-) → system transfers heat out of it
Saturation Dome (T-V)

Saturation Dome (P-V)

T > Tsat → identify state
Superheated Vapor (SHV)

T < Tsat → identify state
Compressed Liquid (CL)

P < Psat → identify state
Superheated vapor (SHV)

P > Psat → identify state
Compressed Liquid (CL)

Equation for Quality
x=mtotalmvapor
Given x = 0 → identify state
Saturated Liquid (SL)
Given 0<x<1 → identify state
Saturated Liquid Vapor Mixture (SLVM)
Given x=1 → identify state
Superheated Vapor (SHV)
Given T/P, v/u/h/s; u<uf → identify state
Compressed Liquid (CL)
Given T/P, v/u/h/s; u=uf → identify state
Saturated Liquid (SL)
Given T/P, v/u/h/s; uf<u<ug → identify state
Saturated Liquid Vapor Mixture (SLVM)
Given T/P, v/u/h/s; u=ug → identify state
Saturated Vapor (SV)
Given T/P, v/u/h/s; u>ug → identify state
Superheated Vapor (SHV)
Compressed Liquid Method 1 (SL Approximation)
Always used unless c is given
Identified as a CL w/ no available data from table
Perform SL approximation
v(T,P)≈vf(T)
u(T,P)≈uf(T)
h(T,P)=hf(T)+vf(T)[P−Psat]
Compressed Liquid Method 2 (Incompressible w/ Constant Specific Heat)
Only use if v=c, cp=cv=c=const
du=cdT, dh=cdT+vdP
Δu=cΔT , Δh=cΔT+vΔP
Identifying an Ideal Gas
Guaranteed to be an ideal gas w/ usage of PV=mRT
Guaranteed to be an ideal gas w/ molar mass
Ideal Gas Solving
Do not draw saturation dome
Δu=∫T1T2cvdT
Δh=∫T1T2cpdT
Do not assume cp or cv
Ideal Gas Law
PV=mRT
Pv=RT, v ← specific volume
R=MRˉ
Rˉ ← Universal gas constant
Ideal Gas T-V Diagram

Ideal Gas P-V Diagram

Work (boundary) ← General Form
Wb=∫V1V2PdV ← (kJ)
Wb=∫v1v2Pdv ← (kgkJ)
Work (boundary) ← Polytropic workpvn=C,n=1
W=1−nP2V2−P1V1
w=1−nP2v1−P1v1
Work (boundary) ← Polytropic work pvn=pv=C ,n=1
W=P1,2V1,2⋅ln(V1V2)
w=P1,2v1,2⋅ln(v1v2)
Work (boundary) ← Ideal gas, n=1
W=1−nP2V2−P1V2=1−nmR(T2−T1)
w=1−nR(T2−T1)
Work (boundary) ← Ideal gas, n=1
W=P1,2V1,2⋅ln(V1V2)=mRT1,2ln(V1V2)
w=RT1,2ln(V1V2)
T / F: For a closed system, the chemical composition can change.
True: A lithium ion battery can chemically change
T / F: A system at thermal equilibrium has no heat transfer w/ surroundings
False: A system at thermal equilibrium does not mean it’s at thermal equilibrium w/ surroundings and can potentially transfer heat
T / F: Work is relevant to a particular state of a system
False: Work is a path function and therefor not relevant to process path between states
T / F: Pressure always remains constant during a quasi-equilibrium process
False: Along process of QSE, states are nearly at equilibrium but properties can change along the path
T / F: An adiabatic (Q=0) does not involve work
False: Work can exist without being dependent on Q → it will just result in ΔU=0
T / F: If an ideal gas undergoes a closed system w/ PV constant → ΔT=0 must be true
True: Because PV and mR are constant, then T must be constant
T / F: In a closed, rigid, and well-insulated tank w/ W=0, then U=0
True: Because it is well-insulated, then Q=0 so U=Q−W=0
T / F: When total energy change of a well-insulated, closed system is positive, there must be work done by system
False: When (dtdE=ΔU)>0 and U=W−Q where Q=0 (well-insulated), then U=W. That means that work is positive, meaning that the system is doing work.