1/35
Looks like no tags are added yet.
Risk
The possibility or likelihood that harm (such as injury, illness, or death) will occur when a person is exposed to a given hazard.
Hazard
Any situation, condition, or substance that has the potential to cause harm to an individual.
Elimination
Total physical removal of the hazard, hazardous plant, or process while still achieving the desired operational outcome.
Substitution
Replacing the hazard with a less hazardous alternative, such as a lower-risk tool, benign chemical, or safer process.
Engineering / Isolation
Physically re-engineering the interface or isolating personnel from the hazard, such as barriers, machine guards, interlocks, or local exhaust ventilation.
Administrative / Training
Establishing operating procedures, formal instruction/training, safety signage, and limiting exposure times via job rotation.
Personal Protective Equipment (PPE)
Individual protective equipment or clothing used as an active barrier; the least effective control measure.
Locking Out
A padlock affixed directly to a machine's energy isolator switch to prevent accidental re-energization during maintenance.
Danger Tag
Red and black tags designed for personal protection; only the individual named on the tag may remove it.
Out of Service Tag
Yellow and black tags used to prohibit operation of broken, damaged, or unserviceable equipment.
Portable Drill Size
The maximum diameter of a straight-shank twist drill bit that can be held in a portable drill's chuck.
Pistol Grip with Side Handle
A pistol grip drill with an auxiliary side handle that counters rotational torque and prevents wrist fracture if the bit binds.
Vertical Grinder
A grinder configuration with the drive spindle and wheel at right angles (90 degrees) to the drive motor shaft.
Straight Grinder / Die Grinder
A grinder with the wheel or burr mounted directly on the horizontal axis of the output shaft, used for internal hole dressing and deburring.
Jig
A device that guides the cutting tool directly during machining, such as a drill jig fitted with hardened guide bushings.
Fixture
A dedicated device that holds and locates the workpiece securely to the machine bed without guiding the cutting tool.
Orbital Finishing Sander
A sander with a square pad that vibrates in small circular orbits, ideal for ultra-fine finishing without gouging.
Random Orbital Sander
A sander combining circular planetary motion with back-and-forth oscillation, eliminating visible swirl patterns.
Hand Shears
A cutting tool that cuts metal through a progressive scissor action using two shearing blades.
Nibbler
A tool using a high-speed reciprocating punch that cuts a continuous slot by ejecting small semi-circular chips called slugs.
Jointer
Cleans, straightens, and squares the edge or face of a cupped, twisted, or bowed board.
Planer (Thicknesser)
Cuts the opposite face of a board already flattened on one face to produce uniform thickness.
Bench Drill
Bolted to an elevated workbench to prevent tipping when drilling medium-sized work.
Pillar / Pedestal Drill
A floor-standing drill with an extended supporting column that handles larger stock and drills larger holes.
Hole Saw
A thin-walled cylindrical saw cup mounted to a pilot arbour, used to cut larger diameters efficiently.
Aluminium Oxide Wheel
White grinding wheels that fracture during use to self-sharpen; they run cooler and resist clogging but wear faster.
Tongue and Groove Pliers (MultiGrips)
Slip-joint adjustable pliers with curved, serrated jaws set between 45 and 60 degrees to the handles, used for gripping irregular shapes.
Machine Vice
A vice bolted directly onto the slotted table of a drill press or milling machine.
Pipe Vice
A plumbers' clamping device for holding pipes during threading and cutting, using a yoke screw or wrap-around chain.
Included Point Angle
The angle between the two cutting lips of a twist drill, which measures 118 degrees for general-purpose drilling.
Chisel Edge Angle
The non-cutting bridge at the tip of the web of a drill, which must form a 45 degree angle with the cutting lips.
Dressing a Grinding Wheel
Crushes the bonding material holding worn abrasive grains, exposing fresh sharp crystals and cleaning the wheel surface.
Truing
Restores the physical running geometry of the wheel face so it is concentric to the spindle.
Raker (Depth Gauge)
Forward depth gauge on a chainsaw cutter that controls cutting bite and is checked with a jointing gauge.
Blued Cutting Edge
Blue discoloration of a drill cutting edge indicating overheating and loss of temper; the zone must be ground away without water quenching.
Welding Mask
Dark filter-lens shield protecting the face and retinas from arc radiation, infrared light, and molten spatter.