CompTIA Network+ N10-008 Exam Routing & Switching

Automatic routing table update is a feature of:

Dynamic routing

Which of the following answers refers to a link-state routing protocol?

OSPF

Examples of distance-vector routing protocols include:

RIP & EIGRP

Border Gateway Protocol (BGP) falls into the category of:

Hybrid routing protocols

A manually configured routing table entry is known as:

Static route

The term "Default route" refers to a "last resort" network path used by a router for forwarding all packets with destination addresses not listed in its routing table.

True

Which of the following is an exterior gateway protocol?

BGP

Which of the following answers refer(s) to (an) interior gateway protocol(s)?

RIP, EIGRP, and OSPF

A field in an IP datagram that specifies how many more hops a packet can travel before being discarded is called:

TTL

Which of the following mechanisms can be used to prevent routing loops?

Maximum hop count & Time to live (TTL)

Which of the following terms refer to solutions used for controlling network resources and assigning priority to different types of traffic

Packet shaping & Quality of Service (QoS)

Which of the following solutions enables combining several physical ports of a switching device into a single logical channel?

Link Aggregation Control Protocol (LACP)

A type of Ethernet interface that automatically detects the required cable connection type (straight-through vs. crossover) and configures the connection appropriately is known as:

Auto MDI-X

An Ethernet switch forwards LAN traffic from connected devices based on the information stored in:

MAC address table

A solution that allows to supply electricity over standard Ethernet cables is known as: (Select 2 answers)

PoE | IEEE 802.3af

Which of the following standards implements PoE+?

IEEE 802.3at

Which of the following allows for verifying the absence of traffic on a shared transmission medium in 802.3 networks?

CSMA/CD

A solution that allows to control access to a shared transmission medium in 802.11 networks is known as:

CSMA/CA

Address Resolution Protocol (ARP) provides what kind of resolution?

IP to MAC

Which IPv6 protocol is used by networked hosts to determine the link layer address of adjacent nodes?

NDP

An Ethernet switch table containing IP-to-MAC address mappings is called:

ARP table

An IPv6 protocol performing the function of IPv4's Address Resolution Protocol (ARP) is called:

NDP