1/5
Looks like no tags are added yet.
Composition of Air
Dry air is approximately 78% nitrogen, 21% oxygen, and 1% argon, carbon dioxide, and water vapour by volume.
Practical: Percentage of Oxygen in Air
Purpose: To determine the percentage of oxygen in air using copper.
Method: Pass a known volume of air (e.g., 100 cm³) back and forth over hot copper powder in a silica tube using gas syringes. Heat with a Bunsen burner.
Calculation: Measure the decrease in volume. Volume of oxygen = Start volume - End volume. % Oxygen = (Volume of oxygen / Start volume) × 100. (e.g., 100 cm³ → 79 cm³ gives 21% oxygen).
Source of error:
you need to measure the volume after the air cools down.
air leakage from the connection
Combustion of Magnesium
Method: Clean magnesium ribbon (to remove oxide layer), ignite, and place in gas jar of oxygen.
Observations: Burns with a bright white flame, leaves white ash (magnesium oxide).
Equation: 2Mg + O₂ → 2MgO.
Details: It is an oxidation reaction (gain of oxygen). Lid lifted periodically to let oxygen in. Weighing shows mass increases when reaction complete. Exothermic reaction. Mg also reacts with CO₂ to form MgO and carbon.
Decomposition of Metal Carbonates
Method: Heat metal carbonate (e.g., copper(II) carbonate) in a test tube. Bubble gas through limewater.
Steps: Weigh carbonate, set up clamp, deliver tube into limewater. Heat with blue flame. Remove tube from limewater immediately when stopping to prevent suck-back.
Test: Carbon dioxide turns limewater from colourless to cloudy/milky.
Complete and Incomplete Combustion of Alkanes
Complete Combustion: Occurs with excess oxygen. Products are carbon dioxide and water. (e.g., CH₄ + 2O₂ → CO₂ + 2H₂O).
Incomplete Combustion: Occurs with limited oxygen. Produces carbon monoxide and/or carbon (soot) and water.
Reasons for Incomplete: Insufficient oxygen/air supply, poor ventilation, too much fuel.
Dangers: Carbon monoxide is poisonous (prevents blood transporting oxygen). Soot causes respiratory diseases.