1/37
Comprehensive vocabulary flashcards covering Year 9 Science topics including combustion and fire chemistry, properties of sound waves and human hearing, and physical separation techniques for mixtures.
Dependent variable
The one factor that is measured and recorded during an experiment, such as the time taken to dissolve magnesium metal in 20mls of acid at three different temperatures.
Combustion
Another term for burning; an oxidation reaction in which oxygen (O2) is added to the carbon (C) of a burning fuel to produce carbon dioxide (CO2), water (H2O), and heat energy.
Incomplete combustion
A reaction that occurs when a fire cannot access sufficient oxygen, forming toxic carbon monoxide (CO) gas; demonstrated when a Bunsen burner burns with its air-hole fully closed.
Reactants
The chemical substances that react together during a chemical reaction, written on the left side of the reaction arrow.
Products
The chemical substances that are formed during a chemical reaction, written on the right side of the reaction arrow.
Hydrogen gas test
A identification test where placing a flame into hydrogen gas produces a distinctive squeaky pop.
Oxygen gas test
An identification test in which oxygen gas relights a glowing, red-hot wooden splint.
Carbon dioxide gas test
An identification test where the gas extinguishes a lit splint's flame and turns colourless limewater into a milky white colour.
The Fire Triangle
A model consisting of three components required for fire—fuel, heat, and oxygen; removing any component (e.g., fuel via a fire break, heat via water, oxygen via a fire blanket) extinguishes the fire.
Exothermic reaction
A chemical reaction characterised by an increase in temperature (+), such as a rise from 20∘C to 30∘C (+10∘C).
Endothermic reaction
A chemical reaction characterised by a decrease in temperature (−), such as a fall from 20∘C to 10∘C (−10∘C).
Sound wave
A form of energy caused by vibrations that moves through matter by particles vibrating against adjacent particles; sound cannot travel through a vacuum because there are no particles.
Speed of sound in solids
Sound travels at an average speed of 2,000metres per second through solid metal because the particles are tightly packed together.
Speed of sound in liquids
Sound travels at an average speed of 800metres per second through liquid water because the particles are separated a tiny bit.
Speed of sound in gases
Sound travels at an average speed of 330metres per second through air because the gas particles are very spaced out.
Wavelength
The length of a wave, measured from the crest (top) of one wave to the crest (top) of the next wave.
Amplitude
The height of a wave, measured from the middle of the wave up to the crest or down to the trough; larger amplitudes correspond to louder sounds, while smaller amplitudes correspond to quieter sounds.
Decibel (dB)
The unit of measurement for the loudness of a sound; sounds exceeding 100decibels can cause ear damage.
Frequency
The number of waves in a wave pattern, measured by counting crests; high frequencies produce high-pitched sounds and low frequencies produce low-pitched sounds.
Hertz (Hz)
The standard unit of measurement used to quantify wave frequency.
Audible range
The span of frequencies that an animal can detect; the human audible range spans from 20hertz to 20,000hertz (20kHz).
Ultrasound
Any sound wave having a frequency exceeding 20,000hertz (20kHz), which is above human hearing and used clinically to scan unborn babies.
Echo
A phenomenon created when sound reflects (bounces) off a hard surface; it can be dampened by soft furnishings (cushions, carpets, curtains) that absorb sound energy.
Magnetic separation
A separation method utilizing a magnet to isolate magnetic materials from non-magnetic items, such as separating iron from copper.
Sieving
A separation technique employing a sieve to segregate mixtures whose components differ in physical particle size, such as separating stones from sand.
Filtration
A process used to separate insoluble solid substances from liquids; the liquid passes through filter paper while the insoluble solid is retained.
Evaporation (separation method)
A technique used to separate soluble materials dissolved in water by boiling off the liquid into the atmosphere as steam, leaving the dry solute behind.
Distillation
A technique used to separate soluble materials dissolved in water while condensing and collecting the vapor back into liquid (distilled water) using a Liebig condenser.
Chromatography
A method used to separate colours, inks, and dyes by drawing solvent up filter paper; the starting line is drawn in pencil to avoid ink contamination.
Soluble
The property describing a solid substance that will dissolve in a solvent (e.g., salt or sugar).
Insoluble
The property describing a solid substance that will not dissolve in a liquid (e.g., sand).
Solute
A chemical substance that dissolves into a liquid solvent to create a solution (e.g., salt or sugar).
Solvent
A liquid medium in which another material dissolves (e.g., water).
Solution
A homogeneous mixture formed by thoroughly combining a solute and a solvent (e.g., salty water).
Saturated solution
A state reached when a solvent cannot dissolve any additional amount of solute at that temperature.
Residue
The insoluble solid material that remains trapped on the filter paper after a filtration process.
Filtrate
The liquid that successfully passes through the pores of the filter paper during filtration.
Conservation of mass in solutions
The principle stating that total solution mass equals the sum of solute and solvent masses; for instance, adding 15grams of salt to 100grams of water produces 115grams of solution.