1/57
Flash card Study Set for "Section 4: Signs" of the Wisconsin Motorists' Handbook 2026 Edition. (11/20/2026)
Warning Signs
These signs are yellow with black lettering or symbols. Most are diamond shaped. They warn you about a special situation or that a hazard is ahead.

Intersection / Cross Road
A place where two or more roads cross.

Divided Highway
Two lanes where the traffic is going in opposite directions on the highway. The traffic ahead will come across a physical barrier such as a guardrail.

Slippery When Wet
The road ahead might be slippery. Slow down when you see this sign.

Signal Ahead
Stop lights are ahead. Be ready to slow down and stop

Deer Crossing
In these areas deer are very likely to cross the road. Be alert.

Sharp Turn
This sign can show a left or right arrow. Be ready to slow down when you are turning on this road.

Lane Ends
This sign can show a right or left lane ending. Move to the other lane when it is safe to do so.

Merge
This sign can show a right or left lane merge. Make sure to move over to the next lane when it is safe to do so.

Hill
You will see this sign when there is a hill ahead. Slow down if needed to stay safe.

2-Way Traffic
You will see this sign when you are leaving a one-way roadway and entering a roadway with opposing traffic.

Curved Road
The road will slowly move to the right or left. Slow down if needed to safely drive on this road.

Stop Ahead
There is a stop sign ahead. Slow down so that you can safely stop. This sign will have an arrow and the shape of the stop sign below the arrow.

Roundabout Ahead
The diamond contains a counterclockwise symbol. The rectangle below says, “Roundabout Ahead.”

Pedestrian Crossing
The sign shows a pedestrian in the main diamond and an arrow in the rectangular sign below. This arrow indicates where the crossing is. Yield to crossing pedestrians.

School Crossing, School Zone (May be fluorescent green or yellow)
This sign shows pedestrians in the main sign and an arrow below. This is specific to school zones and crossings. Yield to crossing pedestrians.
Regulatory Signs
These signs are square, rectangle or a special shape. They can be white or red with black, red, white or green lettering and symbols. The sign will tell you the rules of the road.

No Turn
The sign will point in the direction you are not allowed to turn to

No U-turn
You cannot make a U-turn

Do Not Enter
You cannot enter. This is used on exit ramps going the wrong direction or one-way streets.

Speed Limit
This indicates the maximum speed you can drive in good driving conditions.

Reduced Speed Ahead
This means that you should slow down. There might be a curb or slippery road ahead.

Speed Limit in a School Zone
When children are visible you cannot go over the speed listed.

Keep Right
A traffic island or obstacle divides the road ahead.

Left Lane | Right Lane Sign
The dot with the left turn only indicates the center of the roundabout. The line on the sign indicates the different lanes. In this example you can only use the left lane to turn left or make a U-turn. You would use the right lane to go straight or turn right.

Left Lane | Middle Lane | Right Lane Sign
There are three signs, which means there are three lanes of traffic. In this example the farleft lane is used to go left or stay straight. The middle lane is to go straight. The right lane is to turn right.

Left Lane | Right Lane Sign
In this example the far-left lane is used to only turn left. The right lane is to turn left or go straight.

Stop
This sign has eight sides and is red with white letters. You must come to a complete stop and wait until your path is clear before continuing.

Slow Moving Vehicle
A triangle shaped sign with reflective orange markings. This vehicle could travel at 25 mph or less.

Yield
A downward pointing red and white triangle with red letters. This sign means that you must yield right-of-way to other vehicles.

No Passing Zone
A yellow pennant with black lettering. You are not allowed to pass any vehicle in the no passing zone.

Reserved Parking Only
You are only able to park here if you hold a valid disabled parking identification permit or valid disabled license plate. Click on the title for more information on how to obtain this permit or license plate.
Construction Signs
These signs are for construction, maintenance or emergency workers. They are an orange diamond or rectangle. The lettering and symbols are black. These signs warn you about people working on or near the road.
You will often see orange signs, cones and flags around these work areas. This is your signal to slow down. Traffic fines double in these areas. You can only use your cellphone in a construction zone if you are reporting an emergency.

Road Workers Ahead
Road workers are up ahead. Make sure to slow down or move over.

Road Construction Flagger Ahead
A worker with a sign or a flag. You must follow their directions.

Road Work Ahead
The sign will tell you how far up ahead the construction work is. Make sure to slow down or move over.
Destination Signs
Destination signs are square or rectangular. They are green or brown with white lettering. They show directions and distance to different places. They can show you directions to cities, states and airports. They can also show you how to get to parks, historical areas or museums.

Destination
These signs show the city, state and direction you are going to travel.
This example shows the city location of Madison. You can take interstate 94 going west to get to Madison.

Exit
These signs tell you which way the exit is. The arrow will show which direction the exit is located.
This example shows the exit sign with the arrow pointing to the right. The exit lane would be located on the right.

Roundabout Exits
his sign is for roundabouts. It shows you which road you will be on when you exit the roundabout.
This example shows that if you exit right, you will be on “East Street.”

Street Name Sign
hese signs tell you the name of the road. They are located on almost every corner. The sign will be posted on top of a silver pole facing the road they are named after.

Brown Destination Signs
They show information about fun or beautiful places. Some signs show how many miles it will take you to get to the location listed on the sign.
Service Signs
Service signs are square or rectangular. They are blue with white letters or symbols. They show you how to get to different services nearby. Some services might include camping or a hospital. Some disabled access signs are white with green letters with a blue background.

Access for the Disabled
This sign shows you where there is access for the disabled.Access to the Hospital

Access to the Hospital
This sign shows you which direction the hospital is located.

Mile Marker Signs
These signs are also known as reference markers or enhancement reference signs. They are tall, thin rectangular blue or green signs with white lettering. These signs help you locate where you are on the road. They improve emergency response times to highway incidents.
Each mile marker includes the direction of travel, route number and mile number. They are at every one to two-tenths of a mile. You can find them on the right side of the road or in the median.
Route Number Signs
This sign shape and color changes depending on the type of road you are traveling on. These signs help you navigate the routes to get to your destination.

County Road
The county sign is rectangular with rounded edges. It is white with black lettering.

U.S. Route
The U.S. roadway looks like a police badge. It is normally grey or white with black lettering. These roads are a network or roads and highways within the United States.

State Road
The sign looks like a milk jug with a spout at the bottom. This sign is white with black lettering.

Interstate Highway
This sign looks like a shield with red on top and blue on the bottom. It has white lettering.
Railroad Crossing Signs
The railroad crossing signs warn you that a train might be close. Never try to beat a train across the tracks. Do not stop on the tracks. Do not cross the tracks if there is not room on the other side. Do not shift gears while crossing the railroad tracks. Before you cross railroad tracks make sure to look both ways, even if the railroad signs are not flashing.
Some signs may have a “Tracks out-of-service” sign across them. This means that the tracks are no longer in use. An “Exempt” sign means certain vehicles are not required to stop before crossing.
Remember that trains are large, heavy and moving faster than they seem.

Railroad Crossing Warning
This sign is round with a yellow background. It has an “X” symbol with black lettering.
This means that there is a railroad crossing. Be alert and make sure to watch for a train.

Train Approaching
This sign has the crossbuck with the lettering of “Railroad Crossing” and the number of tracks is listed. There could be more than one track to cross.
There are blinking lights that flash when a train is coming on the tracks in either direction. Wait until the lights stop flashing and the track is clear to continue.

Yield to Train
This sign is white, X-shaped or “crossbuck” with “Railroad Crossing” on it. The number of tracks is listed under this.
There is a Yield sign posted below this. You must yield to trains that are crossing.

Report Problem or Emergency
This sign is blue with white lettering. This sign is at every highway-railroad crossing. It shows a phone number to report unsafe conditions.
Examples: A vehicle is stuck on the railroad tracks or the railroad warning light isn’t working.

Number of Tracks
Crossings with more than one train track will often post a sign showing the number of tracks they have. Not all crossings with more than one train track will have these signs. It is important to check for more than one track before crossing.
Before crossing double railroad tracking you should wait until the train is far away so you can see the tracks are clear.

Train Gate
This will lower when a train is coming. Do not drive around the gate or under a raising or lowering gate.
Some have a horn and lights that will sound. Do not cross until the bell or horn has stopped.