(Day 03) Installation Practices of AC Wiring

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/14

encourage image

There's no tags or description

Looks like no tags are added yet.

15 Terms

1
New cards

Why is it important to use clamps and grommets in wire routing?

To prevent chafing and abrasions

2
New cards

What is the purpose of a junction box in an aircraft wiring system?

To protect terminal strips from damage and shorts

3
New cards

Why should wires be routed parallel or at right angles to aircraft stringers and ribs?

To avoid diagonal runs that can cause structural damage

4
New cards

What should be done if the electrical load exceeds the generator's or alternator's capacity?

Decrease the load to within the rated capacity

5
New cards

What is the primary concern when installing electronic equipment in an aircraft's electrical system?

Capacity to carry the load and prevent overheating

6
New cards

What must be done to ensure the secure installation of terminal studs in a terminal strip?

Ensure proper separation and prevent rotation

7
New cards

What is the primary function of lacing and tying wire bundles?

To facilitate installation, maintenance, and inspection

8
New cards

What is the recommended clearance between wires and aircraft structure for bare metal?

3/8 inch

9
New cards

Why is it important to know all actual current draws when determining electrical load requirements?

To ensure proper operation and avoid overloading

10
New cards

What is the minimum bend radius for a wire group or bundle?

10 times the diameter of the largest wire

11
New cards

What should be done to protect disconnected wires in an aircraft?

Use a bag or plug to cover and protect them

12
New cards

How should wires be protected when routed near high-temperature areas?

Install asbestos or fiberglass jackets

13
New cards

How should environmental protection be ensured for connectors in aircraft wiring?

Selection of connectors based on fluid, vibration, and thermal resistance

14
New cards

Which type of connector is typically used in areas that are frequently disconnected?

Quick disconnect connectors

15
New cards

Which of the following is considered a continuous load?

Navigation lights