Unit 57a: Machining in a Chuck

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/10

encourage image

There's no tags or description

Looks like no tags are added yet.

11 Terms

1
New cards

Lathe Chuck

most versatile and commonly used spindle accessory

<p>most versatile and commonly used spindle accessory</p>
2
New cards

Cam-Lock/Spindle Nose

provides standard mounting for attaching accessories

3
New cards

Procedure to Remove a Chuck

  1. Spindle Stopped

  2. Shut off electrical swith

  3. Place cradle block/wood under chuck

  4. Align registration line of each cam lock with registration line one lathe spindle nose (12 o’clock)

  5. Place one hand on chuck face and with other hand, sharply strike top of chuck to break taper contact between chuck and lathe spindle

  6. Slide chuck clear of spindle and place on cradle block/wood under chuck

  7. Transfer it carefully in storage area


4
New cards

Procedure to Mount a Chuck

  1. Clean all surface of spindle nose and mating parts of chuck

  2. Ensure registration line on lathe spindle nose is in open position (12 o’clock)

  3. Revolve lathe spindle by hand until holes in spindle align with cam-lock studs of chuck

  4. Slide chuck onto spindle

  5. Tighten each cam-lock in a clockwise direction (between 3 o’clock and 6 o’clock)


5
New cards

Straight Turning

knowt flashcard image
6
New cards

Facing

knowt flashcard image
7
New cards

Taper Turning

knowt flashcard image
8
New cards

Knurling

knowt flashcard image
9
New cards

Center/Drilling on a Lathe

knowt flashcard image
10
New cards

Parting, Parting off

knowt flashcard image
11
New cards

External Threading

knowt flashcard image