1/36
Looks like no tags are added yet.
PEER – Pacific Earthquake Engineering Research Center
A US‐based research center that advances knowledge on earthquake effects, building performance, and risk‐reduction tools used worldwide including in Philippine design references.
EERI – Earthquake Engineering Research Institute
An international nonprofit organization that shares earthquake‐engineering research, case studies, and post‐earthquake assessment guidelines for engineers globally.
IAEE – International Association for Earthquake Engineering
A global professional body that promotes research, codes, and cooperation among earthquake engineers across countries.
ASEP – Association of Structural Engineers of the Philippines
The leading Philippine structural‐engineer association that develops and updates the National Structural Code of the Philippines (NSCP) for local seismic design. Codes / Standards (with definitions & use in PH)
NSCP – National Structural Code of the Philippines
The main local technical code that sets minimum requirements for designing earthquake‐resistant buildings and structures in the Philippines.
IBC – International Building Code
A widely used international building‐safety code; the Philippines uses it as a reference but follows NSCP as the primary local standard.
ASCE 7 – Minimum Design Loads and Associated Criteria for Buildings and Other Structures
A US standard that gives seismic load calculation methods — the NSCP adapts many of these provisions for Philippine conditions.
Eurocode 8 (EN 1998) – Design of Structures for Earthquake Resistance
The European seismic‐design standard; used mainly for reference here and not the mandatory code or just for reference in the Philippines.
Professional Engineer (PE) License
Requires an ABET-accredited degree, passing FE and PE exams, and 4+ years of relevant field experience.
Structural Engineer (SE) License
Specialized credential for high-seismic zones; requires passing the 16-hour NCEES exam and 6+ years of specialized experience.
ASCE Certificate
Validates expertise in seismic load analysis, structural detailing, and retrofitting.
Seismic Equipment & Component Certification
Qualifies engineers to certify building equipment via shake-table testing under ASCE 7 and IBC codes.
Seismic & Hazard Analysis
Evaluates fault lines, peak ground acceleration, and soil-structure interaction to mitigate liquefaction risks.
Modeling & Simulation
Conducts non-linear static (pushover) and dynamic time-history analyses using ETABS, SAP2000, or ANSYS.
Design & Detailing
Implements base isolators, dampers, shear walls, and ductile detailing to prevent structural collapse.
Retrofitting & Assessment
Evaluates non-ductile concrete buildings and executes post-earthquake safety tagging (ATC-20).
Practices and Experience
Seismic hazard and site assessment
Structural analysis and design
Retrofitting of old buildings
Construction inspection
Design Principles and Technologies:
Strong columns, weak beams
Ductile materials and symmetrical shapes
Base isolation and dampers
Follows NSCP (National Structural Code of the Philippines)
1990 Luzon (M7.8)
Building collapses and liquefaction, which led to code updates.
2013 Bohol (M7.2)
Old churches damaged, which raised awareness of heritage retrofitting.
Kobe, Japan (1995)
Major lessons that improved Japan's codes.
Dr. Benito M. Pacheco
Structural Dynamics & Earthquake Engineering
Professor Emeritus, UP Institute of Civil Engineering
Ph.D. in Civil Engineering, University of Tokyo
Member of the UP Structural Engineering Group
Research in structural engineering, structural dynamics, and earthquake engineering
Contributed to research on seismic response and earthquake risk assessment
Dr. Benito M. Pacheco
Works and Publication
Application of Structural Dynamics in Earthquake and Wind Engineering
Three-Dimensional Nonlinear Time-History Analysis of Two-Storey Concrete Wall-Type Structure
GIS-Based Earthquake Damage Assessment Considering Seismic Capacity of Existing Buildings in Metro Manila
Research on structural response and seismic risk assessment
Dr. Andres Winston C. Oreta
Seismic Assessment & Disaster Resilience Professor of Structural Engineering, De La Salle University
Fellow, Association of Structural Engineers of the Philippines (ASEP)
Research interests include earthquake engineering and structural dynamics
Research on seismic vulnerability assessment
Contributed to disaster risk reduction and infrastructure resilience
Dr. Andres Winston C. Oreta
Works and Publication
Seismic Vulnerability Assessment of Soft Story Irregular Buildings Using Pushover Analysis
A Computer-Aided Semi-Quantitative Seismic Risk Assessment Tool for Safe School Buildings
A Multi-Spatial Assessment Framework to Geological Hazard for High-Rise Building Project in Metro Manila
Research on identifying and prioritizing vulnerable structures
Dr. Francis Aldrine A. Uy
Structural Health Monitoring & Earthquake Resilience
Founder of USHER (Universal Structural Health Evaluation and Recording System)
President & CEO, USHER Technologies Dean, School of Civil, Environmental and Geological Engineering, Mapúa University
Research in structural health monitoring and structural resilience
Developed and applied technology for monitoring structural response
Dr. Francis Aldrine A. Uy
Works and Publication
Universal Structural Health Evaluation and Recording System (USHER)
Earthquake and Structural Health Monitoring Assessment and Evaluation System
Seismic Evaluation of Padre Jacinto Zamora Bridge Using USHER Technology
Application of structural monitoring technology for earthquake assessment and infrastructure resilience
Base Isolation
A method of protecting a building by placing special bearings or isolators between its foundation and the structure above it.
The Bamberton Center
In Arca South, Taguig uses High-Damping Rubber (HDR) Bearings as its seismic isolation system.
Seismic Dampers
Engineers installed special devices called seismic dampers inside the building, often diagonally between floors and columns.
Buckling-Restrained Braces (BRBS)
Engineers added specially designed braces to an existing tall building to control movement during earthquakes.
Cross-Bracing
Engineers added diagonal steel members to the building frame, forming an X-shaped pattern.
Shear Walls
Engineers use strong reinforced-concrete walls as part of the building's structural system.
Tuned Mass Damper (TMD)
A large mass is placed inside a building and designed to move in a controlled way when the building moves.
DOST-PHIVOLCS
(Seismic Monitoring & Geohazards)
Project Technical Specialists / Assistants for seismic network monitoring.
GeoRiskPH and REDAS (Rapid Earthquake Damage Assessment System) for real-time hazard mapping.
Active fault mapping and tsunami risk assessments.
DPWH - Bureau of Design
(Infrastructure Quality)
AMH Philippines, Inc.
(Originating from the UP Diliman Academic Community)
Sy^2 + Associates