1/69
Vocabulary practice flashcards covering documentation standards, physical hardware, switching, routing protocols, 802.11 wireless technologies, and network security appliances from the lecture notes.
TIA/606
The industry standard governing network documentation and administrative infrastructure requirements.
Passive Network Infrastructure
Non-electronic network physical components that do not actively process data, specifically including cables, equipment racks, and patch panels.
Lansweeper
An asset management tool explicitly used for tracking network software and hardware inventories.
RFID Tags
Small electronic tags that leverage radio frequency (RF) to track physical assets and enable geo-fencing.
Vendor Documentation
Essential administrative records that must track product life cycle details, software and hardware licenses, and associated expiration dates.
Main Distribution Frame (MDF)
The central network wiring and equipment hub that serves as the core processing brain of an enterprise network.
Intermediate Distribution Frame (IDF)
A secondary network wiring closet acting as a localized substation and physical extension of the MDF.
TIA/EIA 606 Voice Color Code
Red, the standardized cable labeling color designated to represent voice connections.
TIA/EIA 606 MDF Color Code
White, the standardized termination color code conventionally designated for the Main Distribution Frame.
Equipment Rack Standard Width
19 inches, the standardized width for server and network equipment racks accommodating multi-vendor hardware.
Rack Unit (U)
A standard unit of vertical measurement in network equipment racks equal to 1.75 inches per U.
Hub
A legacy physical layer (Layer 1) device lacking frame-processing logic that broadcasts all incoming traffic across all ports in half-duplex.
Bridge
A legacy network device that operates at Layer 2 (Data Link) to filter and segment traffic between network segments.
MAC Address
A 48-bit (6-byte) physical hardware identifier permanently burned into a Network Interface Card.
Organizationally Unique Identifier (OUI)
The first 24 bits (3 bytes) of a MAC address that specifically identifies the hardware manufacturer.
Broadcast MAC Address
FF:FF:FF:FF:FF:FF, the hexadecimal Layer 2 address used to transmit frames simultaneously to all nodes on a local segment.
Address Resolution Protocol (ARP)
The TCP/IP protocol responsible for resolving a known Layer 3 logical IP address to a physical Layer 2 MAC address.
arp -a
The Windows command-line utility used to view the current contents of the local ARP cache table.
arp -d *
The Windows command syntax used to completely flush and delete all entries from the local ARP cache.
Content Addressable Memory (CAM) Table
The internal MAC address table utilized by a Layer 2 switch to map hardware MAC addresses to physical switch ports.
Auto-Negotiation Default Failure State
The failsafe state of a switch port that defaults to the lowest setting (typically 10 Mbps Half-Duplex) when negotiation fails.
Spanning Tree Protocol (STP)
A Layer 2 protocol designed to prevent switching and broadcast loops by establishing a single loop-free logical forwarding path back to a root bridge.
802.3af (PoE)
The original Power over Ethernet standard capable of delivering up to 13W of electrical power to connected devices.
802.3at (PoE+)
The enhanced Power over Ethernet standard capable of supplying up to 25W of electrical power over twisted-pair cabling.
Router
A Layer 3 (Network) Intermediate System that inspects logical destination IP addresses to route packets across disparate networks.
End Systems (ES)
Non-routing client or server hosts terminating network paths, contrasted with routing Intermediate Systems.
Metric
A value assigned to a route within a routing table indicating path cost, where a lower number represents a more optimal path.
Default Route
The route designated as 0.0.0.0/0 in IPv4 used by a router to forward packets when no specific destination route exists in the routing table.
Routing Information Protocol (RIP)
A legacy distance-vector routing protocol bounded by a 15-hop limit; RIPv2 exchanges updates over UDP port 520.
Enhanced Interior Gateway Routing Protocol (EIGRP)
A Cisco proprietary hybrid/advanced distance-vector routing protocol that encapsulates directly into IP packets using protocol 88.
Open Shortest Path First (OSPF)
A widely deployed link-state Interior Gateway Protocol organized into hierarchical areas that runs directly over IP via protocol 89.
Border Gateway Protocol (BGP)
A path-vector Exterior Gateway Protocol establishing connections over TCP port 179 to route data across autonomous systems on the Internet.
route PRINT
The Windows command-line utility used to display active IPv4 and IPv6 network routing tables.
pathping
A Windows network diagnostic tool integrating ping and traceroute to measure per-hop latency and packet loss over sustained intervals.
Wi-Fi 4 (802.11n)
The wireless standard introducing Multiple-Input Multiple-Output (MIMO) capable of operating in both 2.4 GHz and 5 GHz frequency bands.
Wi-Fi 5 (802.11ac)
The wireless standard operating strictly in the 5 GHz band that introduced Multi-User MIMO (MU-MIMO) and wider channel widths.
Wi-Fi 6 (802.11ax)
The high-efficiency Wi-Fi standard introducing OFDMA and extending functionality into the 6 GHz spectrum under Wi-Fi 6E.
RTS/CTS (Request-to-Send / Clear-to-Send)
The handshake mechanism utilized within CSMA/CA to coordinate wireless channel access and avoid transmission collisions.
2.4 GHz Non-Overlapping Channels
Channels 1, 6, and 11, which represent the only three non-overlapping channels in the North American 2.4 GHz wireless spectrum.
Basic Service Set (BSS)
A foundational wireless topology component composed of a single centralized Access Point (AP) and its associated wireless stations.
Basic Service Set Identifier (BSSID)
The unique 48-bit MAC address identifying an Access Point's wireless radio interface within a BSS.
Independent Basic Service Set (IBSS / Ad-hoc)
A peer-to-peer wireless architecture allowing client stations to communicate directly with one another without an Access Point.
Omnidirectional Antenna
An antenna designed to radiate radio frequency energy evenly across 360 degrees horizontally in a toroidal (donut) shape.
Yagi Antenna
A directional antenna characterized by high gain utilized for medium-range point-to-point wireless links.
Lightweight Access Point Protocol (LWAPP)
A protocol enabling lightweight wireless access points to offload processing and maintain encrypted communication with a centralized wireless LAN controller.
Received Signal Strength Indicator (RSSI)
A relative measurement of incoming radio frequency signal strength where higher numerical values indicate stronger reception.
Wired Equivalent Privacy (WEP)
An early, deeply flawed wireless security standard widely considered the most insecure encryption protocol.
Simultaneous Authentication of Equals (SAE)
The secure key-exchange handshake protocol introduced in WPA3 to eliminate vulnerabilities associated with WPA2 Pre-Shared Keys.
Extensible Authentication Protocol (EAP)
An authentication framework utilized by WPA-Enterprise (802.1X) to facilitate customized credentials, user accounts, and digital certificates.
Evil Twin
A rogue wireless access point configured to mimic a legitimate network's SSID to intercept and manipulate client traffic.
Management Frame Protection (MFP / 802.11w)
The IEEE standard feature that cryptographically secures management frames against spoofed de-authentication and disassociation attacks.
Packet-Filtering Firewall
A stateless firewall inspecting individual Layer 3 and Layer 4 packet headers against static criteria without session tracking.
Stateful Packet Inspection (SPI)
A firewall mechanism that records active TCP connections inside a dynamic state table to monitor end-to-end conversational context.
Next-Generation Firewall (NGFW)
An advanced Layer 7 firewall performing deep packet inspection (DPI) to identify application signatures, payloads, and malicious threats.
Implicit Deny
The default security rule at the end of an Access Control List (ACL) that automatically drops any traffic not explicitly permitted by prior rules.
Network Intrusion Detection System (NIDS)
A passive network security monitoring device connected to mirrored switch ports that detects threats and triggers alerts without intercepting traffic.
Network Intrusion Prevention System (NIPS)
An active inline security appliance placed in the direct transmission path to inspect, block, or drop malicious network traffic in real time.
Unified Threat Management (UTM)
An all-in-one security appliance integrating firewall capabilities, intrusion prevention (IPS), and antivirus inspection into a single platform.
IAAA Framework
The comprehensive security access control model comprising Identification, Authentication, Authorization, and Accounting.
Authentication
The specific step in the IAAA security process that validates and proves an identity claim submitted by a user or device.
Authorization
The phase of access control determining the explicit permissions and access rights granted to an authenticated entity.
Accounting
The tracking and recording of user actions and resource consumption through audit logs within the IAAA model.
Principle of Least Privilege
A fundamental security doctrine restricting users and processes strictly to the minimum system permissions necessary to accomplish their assigned duties.
Separation of Duties
A structural security control partitioning critical administration tasks across multiple individuals to eliminate single points of compromise.
Managed Switch
An Ethernet switch that allows administrators to configure custom security parameters, create VLANs, and manage ports.
Channel Bonding
The technique of aggregating multiple physical network channels or ports together to achieve greater combined throughput.
160 MHz Channel Width
An ultra-wide wireless channel aggregation option introduced in Wi-Fi 5 Wave 2 and expanded in Wi-Fi 6 for maximum data throughput.
Loopback Interface
A virtual router interface utilized for diagnostic testing, secure management access, and providing a persistent routing protocol ID.
Static Route
A fixed routing path explicitly configured by a network administrator into a router's routing table.
Site Analyzer / Wireless Survey Software
A specialized software utility used to assess wireless coverage, analyze signal attenuation, and visualize dead zones via RF heat maps.