1/25
Looks like no tags are added yet.
RUNWAY LOCATION SIGN:
This sign identifies the runway upon which your aircraft is currently located.

This sign indicates thousands of feet remaining to the end of the runway. 8 = 8000' remaining.

CLOSED RUNWAY or TAXIWAY SIGN.
This marking means the runway or taxiway is closed.

RUNWAY EDGE LIGHTS.
These lights outline the edges of a runway.

You're on taxiway ALPHA, approaching runway intersections.
This array is located at the intersection of two runways and a taxiway

RUNWAY HOLD SHORT LINES.
When seen on a taxiway in conjunction with a red and white runway identifier sign, this surface-painted marking indicates that an aircraft or vehicle may taxi up to but not cross the double solid lines until instructed to proceed by ATC.

ILS Critical area holding position sign.
An aircraft that taxis past this sign may interfere with the navigational landing aid signals that an approaching aircraft is using. Stop if directed to by ATC.

Stopping behind this marking will ensure wingtip clearance for aircraft on an intersecting taxiway.

ILS critical area boundary lines.
This painted marking indicates the edge of the ILS critical area. Ground control may ask you to hold short of this marking if an aircraft is using the ILS.

RUNWAY HOLD POSITION SIGN.
This sign alerts of an approaching runway and is accompanied by a yellow, surface-painted RUNWAY HOLD SHORT LINES.

NO ENTRY SIGN.
This no entry sign denotes that aircraft are prohibited from proceeding beyond it.

RUNWAY APPROACH HOLD POSITION SIGN.
Taxiing past this sign may interfere with operations on the runway. Stop if directed to by ATC.

TAXIWAY EDGE LIGHTS.
These lights outline the edges of a taxiway.

These lights are sometimes installed on each side of a taxiway prior to its intersection with a runway.

TAXIWAY LOCATION SIGN.
This sign identifies the taxiway upon which you are located.

This marking indicates the edge of a path for vehicle traffic on areas also intended for aircraft.

This array indicates that you are approaching the intersection of two taxiways.

RUNWAY DIRECTION SIGN.
This sign indicates the direction to a destination runway.

TAXIWAY DIRECTION SIGN
This sign indicates an exit from a runway onto the designated taxiway.

MOVEMENT/NON MOVEMENT AREA LINES.
This surface-painted marking separates the movement and non-movement areas on the airport. ATC clearance is needed to move beyond the solid line onto the movement area

ENHANCED TAXIWAY CENTERLINE.
This surface-painted enhanced taxiway centerline marking runs up to 150 feet back from the runway hold short lines and alerts of an approaching runway

TAXIWAY ENDING MARKER:
Indicates that twy does not continue beyond this point.

DISPLACED THRESHOLD:
white arrows/area prior to the runway threshold lines. Can be used for taxi & takeoff, but CANNOT be used for landing. Must land beyond the runway threshold.

BLAST PAD:
Yellow chevrons. Also known as OVER RUN AREAS, or STOP WAYS.

TAXIWAY ALIGNED WITH RUNWAY.
Usually from the runway threshold having to be moved forward on the runway surface.

FBO DIRECTION SIGN:
FBO=fixed base operations. These places are for general aviation aircraft parking & fueling, and usually have a lounge with bathrooms.
