Ch.4 X-Ray Circuit Test Questions

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/139

encourage image

There's no tags or description

Looks like no tags are added yet.

140 Terms

1
New cards

Electrostatics

study of stationary electric charges and electrodynamics is the study of electric charges in motion

2
New cards

a

The study of electric charges in motion is
a. electrodynamics
b. electromagnetism
c. electronics
d. electrostatics

3
New cards

d

The unit of measurement of electrical charges (SI) is:
a. watt
b. joule
c. newton
d. coulomb

4
New cards

a

One coulomb is equal to the electrical charge of 6.25 X 10^18
a. electrons
b. protons
c. neutrons
d. nuclei

5
New cards

c

One of the laws of electrostatics is that like charges _______ and unlike charges _______.
a. attract; repel
b. attract; attract
c. repel; attract
d. repel; repel

6
New cards

c

As 2 charges get closer, the electrostatic force:
a. is directly proportional to the amount of distance between them
b. is inversely proportional to the amount of distance between them
c. is inversely proportional to the square of the distance between them
d. is directly proportional to the square of the distance between them

7
New cards

c

If a conductor is curved, the greatest amount of charge will be found:
a. at the beginning of the conductor
b. at the end of the conductor
c. at the area of the greatest curvature of the conductor
d. along the straightest area of the conductor

8
New cards

c

When there is movement of some of the electrons of an uncharged metallic object as it is brought into the electric field of a charged object, this is electrification by:
a. contact
b. friction
c. induction
d. A and B

9
New cards

b

Electrification by induction requires that the two objects:
a. are in direct constant contact with each other
b. are not at all in contact with each other
c. contact each other and then separate
d. are as far apart as possible from each other

10
New cards

e

To get electrons to flow along a conductor, there must be:
a. an excess of negative charges at one end of the wire
b. an excess of negative charges at both ends of the wire
c. an excess of positive charges at one end of the wire
d. an excess of positive charges at both ends of the wire
e. A and C

11
New cards

b

The ability to do work because of a separation of charges is
a. electric current
b. electric potential
c. resistance
d. electrostatics

12
New cards

a

The flow of electrons along a conductor is:
a. electric current
b. electric potential
c. resistance
d. electrostatics

13
New cards

c

The property of a circuit that impedes the flow of electrons is:
a. electric current
b. electric potential
c. resistance
d. electrostatics

14
New cards

b

The volt is the unit of measure for:
a. electric current
b. electric potential
c. resistance
d. electrostatics

15
New cards

a

The ampere is the unit of measure for:
a. electric current
b. electric potential
c. resistance
d. electrostatics

16
New cards

c

A volt is the potential difference that will maintain a current of ________ ampere in a circuit with a resistance of ______ ohm.
a. 1; 2
b. 2; 1
c. 1; 1
d. 2; 2

17
New cards

d

Kilovolt peak is abbreviated as:
a. KP
b. kPk
c. kVPk
d. kVp

18
New cards

c

A material that allows electrons to move is a(n):
a. volt
b. insulator
c. conductor
d. inductor

19
New cards

b

A material that resists the movement of electrons is a(n):
a. ohm
b. insulator
c. conductor
d. inductor

20
New cards

b

Which of the following materials is a good conductor?
a. glass
b. copper
c. plastic
d. they are all good conductors

21
New cards

a

Glass is an example of a(n):
a. insulator
b. conductor
c. material that allows the flow of electrons
d. inductor

22
New cards

c

A battery produces:
a. alternating current
b. indirect current
c. direct current
d. current that changes direction

23
New cards

a

Current that changes direction in the conductor is:
a. alternating current
b. indirect current
c. direct current
d. weak current

24
New cards

a

60 Hz characterizes:
a. alternating current
b. indirect current
c. direct current
d. weak current

25
New cards

c

A(n) ________ is the electrical resistance between two points along a conductor that, when one volt is applied, produces 1 ampere of current.
a. amp
b. volt
c. ohm
d. watt

26
New cards

a

Ohm's Law can be written as:
a. I = V/R
b. I = R/V
c. R = I/V
d. R = IR

27
New cards

b

When a conductor is longer:
a. resistance decreases
b. resistance increases
c. resistance remains the same
d. none of the above

28
New cards

a

When a metallic conductor is colder:
a. resistance decreases
b. resistance increases
c. resistance remains the same
d. none of the above

29
New cards

c

When a conductor is more twisted:
a. resistance decreases
b. resistance increases
c. resistance remains the same
d. none of the above

30
New cards

b

When a conductor has a smaller cross-sectional area:
a. resistance decreases
b. resistance increases
c. resistance remains the same
d. none of the above

31
New cards

b

Which of the following is NOT a good insulator?
a. glass
b. gold
c. wood
d. ceramic

32
New cards

b

Rubber is:
a. an excellent conductor
b. an excellent insulator
c. a weak conductor
d. a weak insulator

33
New cards

d

A closed pathway of wires and related elements is a(n):
a. diode
b. fuse
c. rheostat
d. electric circuit

34
New cards

a

When a switch is turned on, the electric circuit:
a. is closed
b. does not allow electrons to flow
c. is opened
d. none of the above

35
New cards

b

A device that temporarily stores charge is the:
a. rheostat
b. capacitor
c. transformer
d. fuse

36
New cards

a

An adjustable form of a resistor is the:
a. rheostat
b. capacitor
c. switch
d. diode

37
New cards

d

Which of the following devices allow the electricity to flow in one direction only?
a. fuse
b. switch
c. transformer
d. diode

38
New cards

b

The device that regulates the amount of current flowing in the circuit is the:
a. battery
b. resistor
c. fuse
d. transformer

39
New cards

d

the device that produces electrons through a chemical reaction is a:
a. transformer
b. fuse
c. resistor
d. battery

40
New cards

c

Which of the following devices can increase or decrease voltage by a set amount?
a. battery
b. capacitor
c. transformer
d. A and C

41
New cards

b

The purpose of grounding is to:
a. provide a source for electricity
b. neutralize a charged object
c. replace the circuit breaker
d. none of the above

42
New cards

c

The ability of a material to attract iron, cobalt, or nickel is called:
a. electromagnetism
b. potential difference
c. magnetism
d. voltage

43
New cards

a

The lines of force in space associated with a magnet are called:
a. lines of flux
b. dipoles
c. domains
d. lines of field

44
New cards

b

Inside the magnet, the lines of flux travel from:
a. north pole to south pole
b. south pole to north pole
c. east pole to west pole
d. west pole to east pole

45
New cards

a

Outside the magnet, the lines of flux travel from:
a. north pole to south pole
b. south pole to north pole
c. east pole to west pole
d. west pole to east pole

46
New cards

d

The force of magnetic attraction varies:
a. directly with the square of the strength of the poles
b. inversely with the square of the strength of the poles
c. directly with the square of the distance between the poles
d. inversely with the square of the distance between the poles

47
New cards

a

Magnetic field strength is measured in:
a. telsa
b. ohms
c. newtons
d. joules

48
New cards

d

A material that is weakly REPELLED by a magnetic field is classified as:
a. nonmagnetic
b. paramagnetic
c. ferromagnetic
d. diamagnetic

49
New cards

c

A material that is strongly attracted to a magnetic field is:
a. nonmagnetic
b. paramagnetic
c. ferromagnetic
d. diamagnetic

50
New cards

b

A material that is weakly attracted to a magnetic field is:
a. nonmagnetic
b. paramagnetic
c. ferromagnetic
d. diamagnetic

51
New cards

a

Wood and plastic are considered:
a. nonmagnetic
b. paramagnetic
c. ferromagnetic
d. diamagnetic

52
New cards

d

The idea that electricity flowing through a conductor produces a magnetic field was identified by:
a. Faraday
b. Roentgen
c. Telsa
d. Oersted

53
New cards

The idea that electricity could be induced in a wire by moving it through a magnetic field was discovered by:
a. Faraday
b. Roentgen
c. Telsa
d. Oersted

54
New cards

d

An electromagnet includes:
a. a coil of wire
b. an iron core
c. a solenoid
d. all of the above

55
New cards

b

Reducing the number of coils in the wire will result in:
a. Increased electromagnetic induction
b. reduced electromagnetic induction
c. no effect on electromagnetic induction

56
New cards

a

Increasing the strength of the magnetic field results in:
a. increased electromagnetic induction
b. reduced electromagnetic induction
c. no effect on electromagnetic induction

57
New cards

b

Slowing down the speed at which the conductor passes through the magnetic field results in:
a. increased electromagnetic induction
b. reduced electromagnetic induction
c. no effect on electromagnetic induction

58
New cards

b

Mutual induction involves electricity being induced into a __________.
a. primary coil
b. secondary coil
c. moving magnetic field
d. none of the above

59
New cards

b

With mutual induction, to induce voltage in the secondary coil, there must be:
a. a physical connection between two coils of wire
b. alternating current in the primary coil of wire
c. direct current in the primary coil of wire
d. A and B

60
New cards

a

_____________ current is induced in the secondary coil when mutual induction takes place.
a. Alternating
b. direct
c. neither A or B
d. both A and B

61
New cards

d

With self-induction, the secondary current:
a. is in a secondary coil
b. is in the original coil
c. opposes the original current
d. B and C

62
New cards

c

A device that converts mechanical energy to electrical energy is a:
a. motor
b. transformer
c. generator
d. electromagnet

63
New cards

a

A device that converts electrical energy to mechanical energy is a:
a. motor
b. transformer
c. generator
d. electromagnet

64
New cards

a

A step-up transformer results in:
a. decreased current
b. decreased voltage
c. A and B
d. none of the above

65
New cards

a

A transformer with 100 times more turns on the secondary side as compared with the primary:
a. is a step-up transformer
b. is a step-down transformer
c. is a transformer that works on self-induction
d. will have 100 times the current on the secondary side

66
New cards

b

A transformer with 100 turns on the primary side and 50 turns on the secondary:
a. is a step-up transformer
b. is a step-down transformer
c. is a transformer that works on self-induction
d. will have 100 times the current on the secondary side

67
New cards

d

Closed-core and shell-type transformers:
a. are seldom used in x-ray equipment
b. are less efficient types of transformers
c. are simpler types of transformers
d. none of the above

68
New cards

a

The autotransformer:
a. uses self-induction
b. uses two coils of wire
c. does not use a magnetic core
d. is not typically found in an x-ray machine

69
New cards

a

The autotransformer is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

70
New cards

b

The mA meter is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

71
New cards

b

The rectifiers are found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

72
New cards

a

The main power switch is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

73
New cards

b

The x-ray tube (not filaments) is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

74
New cards

c

The rheostat is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

75
New cards

a

The primary side of the high-voltage transformer is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

76
New cards

a

The timer circuit is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

77
New cards

c

The step-down transformer is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

78
New cards

b

The secondary side of the high-voltage transformer is found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

79
New cards

c

The filament within the x-ray tube are found on the:
a. primary circuit
b. secondary circuit
c. filament circuit
d. none of the above

80
New cards

c

The line compensator is typically wired to the:
a. timer circuit
b. primary side of the high-voltage transformer
c. autotransformer
d. step-down transformer

81
New cards

d

The device referred to as the kVp selector is the:
a. primary side of the high-voltage transformer
b. secondary side of the high-voltage transformer
c. step-down transformer
d. autotransformer

82
New cards

c

The only adjustable transformer in the x-ray circuit is the:
a. Primary side of the high-voltage transformer
b. secondary side of the high-transformer
c. autotransformer
d. step-down transformer

83
New cards

b

The timer located on the secondary circuit is the:
a. synchronous timer
b. mAs timer
c. digital timer
d. none of the above

84
New cards

a

The timer that is based on a motor is the:
a. synchronous timer
b. mAs timer
c. digital timer
d. electronic timer

85
New cards

c

AEC stands for:
a. automatic x-ray control
b. applied exposure control
c. automatic exposure control
d. automatic exposure centering

86
New cards

b

For AEC, the ionization chamber is placed between the _________ and _______.
a. tube; patient
b. patient; image receptor
c. grid; image receptor
d. image receptor; wall

87
New cards

b

Assuming all other factors are accurately adjusted, the exposure time with AEC is based on:
a. the procedure being done
b. the anatomy placed over the ionization chamber
c. the age of the patient
d. the desired quality of the image

88
New cards

d

The device the adjusts the incoming power supplied to the x-ray circuit to maintain 220 V is the:
a. circuit breaker
b. autotransformer
c. timer circuit
d. line compensator

89
New cards

b

The _________________converts volts to kilovolts.
a. step-down transformer
b. step-up transformer
c. autotransformer
d. none of the above

90
New cards

b

AEC controls the______________of radiation reaching the image receptor
a. type
b. quantity
c. energy level
d. all of the above

91
New cards

c

The device that change alternating to direct current are the:
a. transformers
b. filaments
c. rectifiers
d. rheostats

92
New cards

d

The solid-state rectifier has a(n)__________ crystal and a(n)__________ crystal.
a. a-type; b-type
b. x-type; z-type
c. a-type; c-type
d. p-type; n-type

93
New cards

a

The n-type crystal from a solid-state rectifier has an abundance of:
a. electrons
b. electron traps
c. protons
d. proton traps

94
New cards

b

When a negative charge is placed on the p-type crystal and a positive charge on the n-type crystal, the result is:
a. current flows the diode
b. current does not flow through the diode
c. voltage decreases
d. voltage increases

95
New cards

d

Half-wave rectification:
a. suppresses half of the AC cycle
b. uses two rectifiers
c. is seldom used in modern x-ray equipment
d. all of the above

96
New cards

b

Ripple refers to:
a. the fluctuation in amperage in the electricity
b. the fluctuation in voltage in the electricity
c. the fluctuation in resistance in the electricity
d. all of the above

97
New cards

c

Four rectifiers will produce:
a. alternating current
b. half-wave rectified current
c. full-wave rectified current
d. indirect current

98
New cards

d

Single-phase full-wave rectified current has:
a. 10% ripple
b. 25% ripple
c. 50% ripple
d. 100% ripple

99
New cards

a

Three-phase power:
a. uses three AC waveforms at the same time
b.results in three times the ripple
c. is half-wave rectified
d. A and B

100
New cards

a

The less ripple:
a. the more consistent the energy of the x-rays produced
b. the less consistent the energy of the x-rays produced
c. the greater the amount of radiation needed for a specific exposure
d. none of the above