1/28
Looks like no tags are added yet.
What is the objective of combining various materials into a laminated packaging material?
To combine the best of all material properties into a single package structure.
Describe the coextrusion process and explain its advantages, compared with alternate systems.
Co-extrusion combines the outputs of two or more extruders so that a curtain of material exiting the extruder is actually multiple materials fused together. It is solventless, so there is no release of objectionable solvents.
Describe the laminate structure of a juice box container and explain the purpose of each layer
7 layers
-Paper: provides body
-Aluminum foil: provides barrier
-Ionomer: provides super bond to aluminum metal
Laminates for aseptic juice packages usually consist of seven material layers.
Paper provides body while aluminum foil provides a barrier. The ionomer provides a superior bond to the aluminum metal.
You want a transparent package with a high
oxygen barrier. What two polymeric
materials are candidates for adding barrier
properties to the laminate structure? If the
package did not need transparency, what
other options might you consider?
EVOH and OOP.
Foil and metallized films
EVOH is used as a high-oxygen barrier. However, EVOH absorbs water and must be sandwiched between materials that will keep moisture away from it. Oriented polypropylene's (OPP) combination of excellent base properties at an economical cost make it one of the most opular materials for wraps and laminates having sparkling clarity. Foil and metallized films are other non-transparent options.
Describe the difference btween dry-bond laminating and wet-bond laminating
Wet bonding: requires at least one substrate to be porous enough to allow solvent/water to escape. Adhesive applied then nipped and put in oven
Dry bonding: Adhesive is applied to substrate and then dried of solvents. The resinous adhesive is activated by heat. The second substrate is joined to the first
Wet bonding requires that at least one substrate be porous enough to allow adhesive solvent or water to escape. Almost invariably, this substrate is paper. Adhesvive is applied to one substrate, the two substrates are nipped together and th ewhole sent through an oven to set the adhesive. In dry bonding, adhesive is applied to the substrate and then dried of solvents. The resinous adhesive is either tacky or can be activated and set by heat. The second substrate is joined by a heated nip against the first to create the bond
How might you recognize whether a pouch was made on VF/F/S machine or a HF/F/S machine?
Pouches made on a VF/F/S machine feature a seal across the pouch top and bottom and a vertical seal across the center of the back. Pouches made on HF/F/S machines are characterized by a three-sided edge seal
A 25-micrometer thick plastic film has a moisture permeability that is 840 mg/100 square in ./24 hours. What is the likely permeability if we go to a 12.5 micrometer film of the same material?
It will increase to 1680mg/100 sq in /24 hours
When designing a laminate, what material
a. tolerates the highest use temperature?
b. is an economical way of adding stiffness or bulk?
c. is a good oxygen barrier and can be thermoformed?
d. heat seals through greases and bonds well to aluminum?
a. PET and PC
b. paper
c. Nylon based laminates
d. ionomers
a.PET and polycarbonate have the highest used temperature.
b. Paper
c. meat or cheese packs that have one part of the web drawn to a product conforming tray require reasy formability of the web stock. The web stock also needs to have clarity to show off the product and it must have good oxygen barrier properties. this combination of properties is best found in nylon-based laminates
d. ionomers are used when high melt strength is needed. Ionomers tolerate contaminants and create adequate heat seals across greasy contaminants and have super adhesion capability on metal surfaces
In what order at the components of a laminate specified?
Material plies are properly listed from the outside of the package to the inside
How thick is a 150 -gauge film in thousandths of an in.? How many mils is that?
0.0015* = 1.5 mil
Why is it always necessary to specify the permeant(s) when discussing barrier properties
Barrier is too nonspecific. The barrier permeability depends on barrier material as well as the gas in question.
Barrier is a nonspecific word that describes a materials ability to prevent gases from permeating through the volume of the material. as can be seen in TAble 15.5, the barrier qualities of a given material vary, depending on the gas being permeated. It is not enough to say, "we need a high-barrier material." The gas to which a barrier is required must be specified.
Raising the temperature or increasing the pressure of heat-sealing jaws in some instances can decrease bond strength. Why?
Time/temperature/pressure data should be developed for all heat-sealing systems. Excessive combinations of time, temperature, and pressure tend to force melt from the seal are and create a weaker seal.
What three material characteristics might be important for good machinability on a VF/F/S machine?
-Coefficients of friction,
-yield point
-sealability
What is the advantage of a HF/F/S machine over a VF/F/S machine?
Can have multiple stations grouped along the horizontal path of the pouch
-Multiple filling heads and steam purges
HF/F/S machines can have many operating stations grouped along the horizontal travel path of the pouch. This allows for multiple filling heads, steam purges and other activities
Why might a heal seal's poor hot tack performance slow down a filling operation?
A poor hot-tack seal might not be able to resist peeling apart, even though it is still hot
What provision would I need to make if I were designing an EVAL-based barrier laminate for an organic soup product?
-Make sure EVAL film is a barrier to organics in soup
-A very good moisture barrier in laminate
Ensure that the EVAL film selected is a barrier to the organics in the soup, and also assure that a very good moisture barrier is used in the laminate.
Which is easier to make, a fin seal or a lap seal? Why?
A fin style vertical seal is easier to make because it brings together two inside heat seal coated surfaces
From an appearance and marketing point of view, what might be the advantages of a pouch made on an Hf/F/S machine?
Three edge seal allows for front and back panels to be free of seals. It's also easy to put a gusseted stand-up to create a billboard for product.
Pouches made on HF/F/S machines are characterized by a three-sided edge seal. An advantage for graphics is that both front and back panels are free of seals. HF/F/S pouches can be easily accomodated to produce gusseted stand-up pouches to provide an attractive billboard for a product.
List six unique foil properties that are taken advantage of by packagers, and viven an example of a package that uses each property.
Apperance: packaged mints
Barrier: properties: raisin pouch
Dead-fold: margarine wrapper
Friability: single does tablet package
Hygienic: tamper seal on sterilized pharmaceutical bottle
conductivity: susceptor film in a microwave package
Foils are almost always coated. What are some reasons that foil might be coated?
-Render the foil surface heat sealable
-Increase scratch/scuff resistance
-Increase tensile/burst strength
-gloss
Foil coating may render the foil surface heat sealable, increase the foil's scratch or scuff resistance, increase tensile or burst strength, produce a specific surface, improved adhesion of other coatings or printing inks, enhance the water-vapor/gas-barrier properties of light-gauge foils, increase foil's resistance to corrosive agents or products, impart high gloss and three-dimensional depth to foil decoration or printing and lubricate during converting or processing operations.
Below what gauge does pinholing become a major concern? What is the concern?
7-micrometers. The concern is minute holes through foil allowing for gas penetration
In thinner gauges (7 micrometers) used for most packaging, foils suffer from pinholing-minute holes through the foil. Pinholing increases as foil gauge decreases and is a major pathway for gas penetration
Why should all barrier measurements be conducted on the finished package, preferably after a real or simulated shipping test?
It is not uncommon for a prospective barrier laminate to have no measurable permeability in the flat but to have significant permeability when formed, folded and creased into a package
How is a reflective gold surface developed on a plastic film using metallizing technology?
Transparent lacquer and varnishes allow reflective metallic sheen to show through. A transparent yellow lacquer would give the appearance of gold
What advantage is gained by metallizing paper?
Gains the aesthetic appeal of a reflective aluminum surface
Why must paper be dried prior to being metallized?
The high vacuum within the chamber will boil away most of the moisture, but a small amount of moisture content - less than 5%- is still evident within the paper
Which are the most commonly metallized plastic films?
OOP, PET, PA
Oriented polypopylene (OPP), PET and nylon (PA)
What advantage is gained by metallizing films?
-Does not need to be sealed, smoothed or dried
-Decoration
-Improved barrier properties
Plastic film being metallized does not need to be sealed, smoothed or dried as a paper substrate does. In addition to adding decorative appeal, metallizing a plastic film significantly improves barrier properties to all gases.
What is a susceptor film?
Metallizing is used in "susceptor" packaging where the metallized component serves to create a local microwave energy "hot spot" (the aluminum converts microwave energy to radiant heat)
What graphic advantage does a HF/F/S pouch have of a VF/F/S pouch?
Pouches made on HF/F/S machines are characterized by a three-sided edge seal. An advantage is that both front and back panels are free of seals, providing additional desirable space for graphics.