1/77
A comprehensive vocabulary review deck spanning the five CHEMENG modules: Polymer Chemistry, Environmental Chemistry, Metal Chemistry & Metallurgy, Chemical Safety & Hazard Management, and Crystal Structures.
Polymer
A large molecule (macromolecule) composed of repeating structural units (monomers) bonded repeatedly in long chains.
Monomer
The small molecule or repeating structural unit from which a polymer is synthesized repeatedly.
Addition (Chain-Growth) Polymers
Polymers formed by attaching monomer units one-by-one to the active end of a growing chain in a chainlike fashion without producing byproducts (e.g., Polyethylene, Polypropylene, PVC, PTFE).
Condensation (Step-Growth) Polymers
Polymers formed via stepwise intermolecular chemical reactions between monomers containing two functional groups, accompanied by the elimination of a small molecule such as H2āO or HCl (e.g., Polyamides, Polyesters).
Thermoplastics
Polymers that soften and eventually liquefy when heated, and harden when cooled, through processes that are totally reversible and repeatable.
Thermosets
Polymers that become permanently hard during their formation and do not soften upon subsequent heating.
Elastomers
Polymeric products capable of undergoing large reversible elastic deformations under stress and returning to their original shape once the stress is removed (e.g., Rubber, Neoprene).

Polymer Structural Classifications
The architectural arrangements of polymer chains: linear (repeat units joined end-to-end), branched (side-branch chains connected to main chains), cross-linked (adjacent chains linked by covalent bonds), and network (multifunctional monomers forming three-dimensional networks).

Homopolymers vs. Copolymers
Homopolymers are polymers wherein all repeating units along the chain are of the same chemical type, whereas copolymers are composed of two or more different repeat units.

Layers of the Atmosphere
The thermal stratification of Earth's atmosphere comprising the Troposphere (0Ā toĀ 12km), Stratosphere (12Ā toĀ 50km), Mesosphere (50Ā toĀ 80km), Thermosphere (80Ā toĀ 700km), and Exosphere (700Ā toĀ 10000km).
Troposphere
The lowest atmospheric layer (0Ā toĀ 12km) where temperature decreases as altitude increases; it contains approximately 99% of atmospheric water vapor.
Stratosphere
The atmospheric layer extending from 12Ā toĀ 50km containing the ozone layer which absorbs UV radiation, causing temperature to increase with altitude.
Mesosphere
The coldest layer of the atmosphere (50Ā toĀ 80km, dropping as low as ā100āC) characterized by lower ozone concentration and decreased absorption of solar radiation.
Thermosphere
The atmospheric layer (80Ā toĀ 700km) characterized by thin air and the photodissociation of molecules and ions by high-energy solar radiation.
Exosphere
The outermost atmospheric layer (700Ā toĀ 10000km) composed predominantly of the lightest gases (hydrogen and helium) and serving as the boundary to outer space.
Atmospheric Composition (Permanent Gases)
The dry air composition by volume dominated by Nitrogen (78.084%), Oxygen (20.946%), Argon (0.934%), and Carbon Dioxide (0.036%).
Nitrogen Fixation
The geochemical process wherein atmospheric nitrogen (N2ā) is converted into plant-usable forms such as ammonia (NH3ā) or ammonium (NH4+ā).
Nitrification
The two-step biological oxidation in the nitrogen cycle converting ammonia (NH3ā) or ammonium (NH4+ā) into nitrites (NO2āā) and subsequently into nitrates (NO3āā).
Denitrification
The microbial conversion of nitrates (NO3āā) back into nitrogen gas (N2ā), which is released back into the atmosphere.
Chapman Cycle
The continuous stratospheric photochemical cycle of ozone formation and destruction driven by the interaction of solar ultraviolet radiation with diatomic oxygen (O2ā) and oxygen radicals (O).
Primary Air Pollutants
Harmful substances directly emitted into the atmosphere by an original source (e.g., Particulate Matter, SO2ā, NO2ā, CO, and VOCs).
Secondary Air Pollutants
Harmful atmospheric substances formed via chemical reactions among primary pollutants and other atmospheric components (e.g., Ground-level Ozone O3ā, Peroxyacetyl Nitrate [PAN]).
Acid Rain Formation (Sulfur Pathway)
The atmospheric conversion of sulfur dioxide into sulfuric acid: 2SO2ā+O2āā2SO3ā, followed by SO3ā+H2āOāH2āSO4ā.

Thermal Stratification of Water
The distinct vertical temperature and density layers formed in water bodies, classified into Epilimnion (top, warm), Thermocline (middle transition), and Hypolimnion (bottom, cold).
Epilimnion
The top, warmest, and least dense thermal layer in a stratified water body that receives sunlight and is well-oxygenated.
Thermocline
The middle layer of a stratified water body where water temperature drops sharply with depth, acting as a transition zone between the epilimnion and hypolimnion.
Hypolimnion
The bottom, coldest, and densest thermal layer of a stratified water body receiving little to no sunlight, where dissolved oxygen can become depleted.
Alkalinity (Water)
The capacity of an aqueous solution to neutralize acids, also called buffering capacity, mathematically represented by: Alkalinity=[HCO3āā]+2[CO32āā]+[OHā]ā[H+].
Water Hardness
The measure of mineral content in water, primarily caused by multivalent cations and approximated as: HardnessĀ (asĀ mgĀ CaCO3ā/L)ā[Mg2+]+[Ca2+].
Eutrophication
The excessive proliferation of aquatic plant and algal growth caused by the enrichment of water bodies with nutrients like nitrates and phosphates, leading to depleted dissolved oxygen.
Ore
A naturally occurring mineral deposit concentrated enough to allow the economically viable extraction and recovery of a desired metal.
Cation Exchange Capacity (CEC)
The capability of soil particles to hold and exchange positively charged ions (Ca2+, Mg2+, K+, Na+); CEC decreases under acidic conditions as H+ displaces beneficial cations.
Phytoremediation
A biological remediation process that utilizes plants to remove, degrade, or stabilize contaminants (such as heavy metals and organic compounds) from polluted soil and water.
Bioremediation
An environmental cleanup method employing microorganisms (microbes) to degrade, remove, or stabilize soil and water pollutants via natural biological pathways.

Metallic Bonding
Chemical bonding found in metals where positively charged ion cores are held together within a crystalline lattice by electrostatic attraction to a shared 'sea' of delocalized valence electrons.
Metallurgy
The domain of materials science and chemistry covering the extraction, processing, microstructural properties, and engineering applications of metallic elements and alloys.
Extractive Metallurgy
The branch of metallurgy focused on obtaining and refining pure or concentrated metals from their raw ores and minerals.
Pyrometallurgy
High-temperature metallurgical methods used to extract metals from ores, incorporating processes such as calcination, roasting, and smelting.
Calcination
The thermal decomposition of a mineral or compound at elevated temperatures without fusion to drive off volatile species like water or carbon dioxide (e.g., CaCO3āāCaO+CO2ā).
Roasting
A pyrometallurgical process where concentrated ore is heated in excess air or oxygen below its melting point to convert metal sulfides into metal oxides (e.g., 2ZnS+3O2āā2ZnO+2SO2ā).
Smelting
A pyrometallurgical chemical extraction process using intense heat and a chemical reducing agent to extract pure or concentrated base metal from its raw ore.
Hydrometallurgy
The extraction and recovery of metals from ores using aqueous solutions and chemical reactions, consisting of leaching, separation, and precipitation.
Leaching
The hydrometallurgical extraction step in which an aqueous solvent dissolves a target soluble solute out of a solid mineral matrix (e.g., dissolving gold using aqueous NaCN).
Physical Metallurgy
The branch of metallurgy concerned with the physical and mechanical properties, microstructures, and heat treatment processing of metals and alloys.
Annealing
A heat treatment process wherein a metal is heated to an appropriate temperature and cooled slowly to relieve internal stresses, soften the material, and refine its grain structure.
Quenching
The rapid cooling of a heated metal by rapid immersion in a liquid medium such as water or oil to achieve specific hardened phase transformations.
Tempering
The process of reheating a quenched, hardened metal to an intermediate temperature below its critical transformation point to improve ductility and toughness while relieving brittleness.
Alloy
A metallic substance composed of a solid solution of two or more metals, or of a metal combined with one or more nonmetallic elements.
Ferrous Alloys
Metals and alloys wherein iron (Fe) serves as the primary base element, divided broadly into steels (0.1Ā toĀ 2.0wt%C) and cast irons (2Ā toĀ 4wt%C).
Stainless Steel
A corrosion-resistant ferrous alloy that must contain at least 11wt% Chromium (Cr), which forms a spontaneous, self-healing nanoscale passive layer of Cr2āO3ā.
Refractory Metals
Nonferrous metallic elements that feature exceptionally high melting points, including Tungsten (W), Rhenium (Re), Niobium (Nb), and Tantalum (Ta).
Superalloys
High-performance nonferrous alloys (typically based on Co, Ni, or Fe-Ni) engineered to withstand severely oxidizing environments and mechanical stresses at elevated temperatures.
Corrosion
The destructive electrochemical deterioration of a metal resulting from its chemical reaction with the surrounding environment.
Galvanic Series Chart
A relative electrochemical ranking of metals and alloys based on their measured electrode potentials in a specific electrolyte environment (most commonly flowing seawater).
Uniform Attack
A form of electrochemical corrosion occurring with uniform intensity over the entire exposed surface of a metal, frequently leaving behind scale or oxidation deposits.
Galvanic Corrosion
Corrosion that occurs when two dissimilar metals or alloys with different electrochemical potentials are in direct electrical contact within the presence of an electrolyte.
Crevice Corrosion
Localized corrosion occurring within narrow recesses, shielded gaps, or beneath surface deposits where stagnant liquid creates localized depletion of dissolved oxygen.
Pitting Corrosion
A localized form of highly destructive corrosion attack that produces small, deep holes or pits within a metal surface.
Cathodic Protection
An electrochemical corrosion prevention method that suppresses oxidation by making the metal structure the cathode of an electrochemical cell, using either sacrificial anodes (e.g., Zn, Mg) or an impressed direct current.
Chemical Hazard
The potential danger, harm, or damage inflicted by chemical substances on human health, worker safety, or the natural environment.

NFPA 704 System
A standardized hazard identification diamond used by emergency responders featuring four color-coded quadrants: Health (Blue), Flammability (Red), Instability (Yellow), each rated from 0Ā toĀ 4, and Special Hazards (White).
Globally Harmonized System (GHS)
An international standard for chemical management that standardizes the criteria for classifying physical, health, and environmental hazards and establishes uniform labeling and Safety Data Sheets.
Safety Data Sheet (SDS)
A standardized document consisting of sixteen (16) designated sections providing comprehensive data on chemical characteristics, hazards, handling, storage, and emergency control procedures.

Hierarchy of Controls
A system for eliminating or reducing hazard exposure arranged from most effective to least effective: Elimination, Substitution, Engineering Controls, Administrative Controls, and Personal Protective Equipment (PPE).
Elimination (Hazard Control)
The most effective control strategy in the hierarchy of controls, involving the complete physical removal of a hazard from the work environment.
Substitution (Hazard Control)
A hazard control method in which a hazardous material, substance, or dangerous working process is replaced with a non-hazardous or less hazardous alternative.
Engineering Controls
Physical, mechanical, or structural workplace modifications designed to isolate workers from chemical hazards (e.g., fume hoods, local exhaust ventilation, spray booths).

Crystalline vs. Amorphous Solids
Crystalline solids possess long-range periodic or repeating arrays of atoms with sharp melting temperatures; amorphous solids feature randomly arranged atoms and melt over a broad temperature range.
Anisotropy
The condition wherein the physical, mechanical, or optical properties of a material vary when measured along different crystallographic directions.
Unit Cell
The smallest basic repetitive volume of a crystal lattice that exhibits the complete symmetry and pattern of the crystal structure.
Coordination Number (Ncā)
The number of nearest-neighbor or touching atoms/ions surrounding a given central atom in a crystal structure.
Atomic Packing Factor (APF)
The fraction of solid sphere volume inside a unit cell, determined as the total volume of atoms in the unit cell divided by the total unit cell volume: APF=VcāVatomsāā.
Simple Cubic (SC) Structure
A cubic crystal structure with atoms situated solely at the eight cube corners, characterized by n=1 atom/unit cell, Ncā=6, APF=0.52, and edge length a=2R.
Body-Centered Cubic (BCC) Structure
A cubic crystal structure with corner atoms and one central atom, characterized by n=2 atoms/unit cell, Ncā=8, APF=0.68, and edge length a=3ā4Rā.
Face-Centered Cubic (FCC) Structure
A cubic structure with atoms located at all eight corners and the centers of all six faces, characterized by n=4 atoms/unit cell, Ncā=12, APF=0.74, and edge length a=2ā4Rā.
Hexagonal Close-Packed (HCP) Structure
A hexagonal metallic crystal structure with top and bottom hexagon faces of seven atoms each and a midplane of three atoms, having n=6 atoms/unit cell, Ncā=12, APF=0.74, and an ideal ratio of acā=1.633.
Polymorphism vs. Allotropy
Polymorphism is the ability of a solid material to exist in more than one crystal structure across different temperatures or pressures; when this phenomenon occurs in an elemental solid, it is termed allotropy.
Theoretical Density of Crystals (Ļ)
The calculated density of a crystalline solid based on its unit cell geometry: Ļ=VcāNAānAā, where n is the number of atoms per unit cell, A is atomic weight, Vcā is unit cell volume, and NAā is Avogadro's number (6.022Ć1023atoms/mol).