1/66
Vocabulary practice flashcards covering all core Form Four Chemistry topics including acids, bases, salts, thermochemistry, reaction kinetics, chemical equilibrium, organic chemistry II, electrochemistry, metallurgy, and radioactivity.
Arrhenius Acid
A substance that dissolves in water to form H+ or H3O+ as the only positively charged ions.
Arrhenius Base
A substance which dissolves in water to form hydroxide (OH−) ions as the only negatively charged ions.
Brönsted-Lowry Acid
A proton (H+) donor.
Brönsted-Lowry Base
A proton (H+) acceptor.
Amphoteric Oxide
A metallic oxide that exhibits both acidic and basic properties and reacts with both acids and bases (e.g., ZnO, PbO, and Al2O3).
Solubility
The maximum mass of a solute in grams that will dissolve in 100g of water to form a saturated solution at a specified temperature.
Saturated Solution
A solution that cannot dissolve any more solute at a particular temperature.
Solubility Curve
A graph showing the variation of solubility of a solute in grams per 100g of water against temperature in ∘C.
Fractional Crystallization
A process by which soluble solids are separated from each other based on differences in their solubilities by dissolving them in a hot solvent and slowly cooling the mixture.
Temporary Water Hardness
Water hardness caused by the presence of dissolved calcium hydrogen carbonate (Ca(HCO3)2) or magnesium hydrogen carbonate (Mg(HCO3)2), which can be removed by boiling.
Permanent Water Hardness
Water hardness caused by the presence of dissolved calcium or magnesium sulphates and chlorides (CaSO4, CaCl2, MgSO4, MgCl2), which cannot be removed by boiling.
Sodium Permutit
An ion-exchange compound with the formula Na2X used to remove both temporary and permanent water hardness by exchanging its Na+ ions for Ca2+ and Mg2+ ions.
Thermochemistry
The branch of chemistry that studies energy changes that accompany physical and chemical processes.
Exothermic Process
A process that liberates heat energy to the surroundings, characterized by an increase in temperature and a negative enthalpy change (ΔH<0).
Endothermic Process
A process that absorbs heat energy from the surroundings, characterized by a decrease in temperature and a positive enthalpy change (ΔH>0).
Enthalpy (H)
The total heat content stored within a chemical substance.
Thermochemical Equation
A balanced chemical equation that includes physical states and the molar enthalpy change (ΔH) for the reaction.
Latent Heat of Fusion
The amount of heat energy required to convert 1g of a solid into a liquid at its melting point without a change in temperature.
Latent Heat of Vapourization
The amount of heat energy required to convert 1g of a liquid into a gas at its boiling point without a change in temperature.
Bond Energy
The amount of energy required to break a particular chemical bond, which is identical to the amount of energy released when that same bond is formed.
Standard Enthalpy of Heat of Reaction (ΔHrθ)
The enthalpy change that occurs when reactants in their standard states react completely to form products in their standard states under standard conditions (298K and 1atm).
Heat of Formation (ΔHf)
The enthalpy change that occurs when one mole of a substance is formed from its constituent elements in their standard states.
Molar Heat of Combustion (ΔHc)
The amount of heat energy produced when one mole of a substance is completely burned in oxygen gas.
Enthalpy of Neutralization (ΔHneut)
The enthalpy change involved when one mole of hydrogen ions (H+) from an acid is completely neutralized by an alkali to form one mole of water (H2O).
Molar Energy of Displacement
The heat change that occurs when one mole of an element is displaced from a solution of its ions by a more reactive element.
Molar Heat of Solution (ΔHsoln)
The enthalpy change when one mole of a solid dissolves completely in water to yield an infinitely dilute solution.
Lattice Energy (ΔHlatt)
The energy released when one mole of an ionic compound is formed from its infinitely separated gaseous ions.
Hydration Energy (ΔHhyd)
The energy released when one mole of gaseous ions interacts with water molecules to form a solution of hydrated ions.
Hess's Law of Constant Heat Summation
A law stating that the total enthalpy change for a chemical reaction is independent of the pathway taken, provided the initial reactants and final products are identical.
Heating Value of a Fuel
The amount of heat energy liberated when a unit mass or volume of a fuel is completely burned in oxygen, determined by dividing its molar heat of combustion by its molar mass.
Reaction Rate
A measure of the change in the amount or concentration of reactants consumed or products formed per unit time.
Activation Energy (Ea)
The minimum kinetic energy that colliding reactant particles must possess in order to bring about a chemical reaction.
Activated Complex
An unstable, high-energy transitional state of particles corresponding to the maximum energy point along the reaction coordinate.
Photochemical Reaction
A chemical reaction whose rate is initiated or accelerated by the absorption of light energy.
Dynamic Equilibrium
A state of balance in a reversible reaction within a closed system where the forward and backward reactions proceed at the exact same rate, causing macroscopic concentrations to remain constant.
Le Chatelier's Principle
A principle stating that if a stress (change in concentration, temperature, or pressure) is applied to a system at equilibrium, the system will shift its position in such a direction as to oppose the effect of that stress.
Alkanols
A homologous series of saturated organic compounds containing the hydroxyl (−OH) functional group and having the general formula CnH2n+1OH.
Esterification
A reversible reaction between an alkanol and an alkanoic acid catalyzed by concentrated sulphuric(VI) acid with warming to form an alkyl alkanoate (ester) and water.
Saponification
The process of manufacturing soapy detergents by hydrolyzing fats or vegetable oils using concentrated alkali such as sodium hydroxide.
Salting Out
The precipitation of soap from a reaction mixture by adding solid sodium chloride to lower its solubility in glycerol.
Scum
An insoluble precipitate formed when soapy detergents react with calcium or magnesium ions present in hard water (e.g., (C17H35COO)2Ca).
Soapless Detergents
Synthetic cleaning agents derived from petroleum products, such as sodium alkylbenzene sulphonates (R-SO3−Na+), which do not form scum in hard water.
Addition Polymerization
A reaction where many unsaturated monomer molecules join together without the loss of any atoms or small molecules to produce a single large polymer.
Condensation Polymerization
A polymerization process where monomers with two functional groups combine to form a polymer with the simultaneous elimination of small molecules like water (H2O) or hydrogen chloride (HCl).
Vulcanization
The process of heating natural rubber with sulphur to approximately 140∘C to form cross-links that improve its strength, elasticity, and non-sticky character.
Redox Reaction
A chemical reaction that involves simultaneous reduction and oxidation processes, represented by changes in oxidation numbers and electron transfer.
Reducing Agent
A substance that loses electrons, thereby increasing its oxidation number and causing another species to be reduced.
Oxidizing Agent
A substance that gains electrons, thereby decreasing its oxidation number and causing another species to be oxidized.
Electrode Potential
The potential difference that develops between a metal electrode and a solution containing its own ions.
Standard Electrode Potential (Eθ)
The potential difference of a half-cell containing a 1moldm−3 solution of its ions relative to the standard hydrogen electrode measured at 298K and 1atm.
Salt Bridge
A bridge containing an inert electrolyte such as potassium nitrate (KNO3) that connects two half-cells, completing the circuit and maintaining electrical neutrality.
Faraday (F)
The quantity of electric charge carried by one mole of electrons, approximately equal to 96500C.
Faraday's 1st Law of Electrolysis
A law stating that the mass of a substance liberated or deposited at an electrode during electrolysis is directly proportional to the quantity of electricity passed through the electrolyte (m∝Q).
Electroplating
An electrolytic process of depositing a thin, protective or decorative layer of a metal onto another conducting material positioned at the cathode.
Ore
A naturally occurring rock or mineral deposit from which one or more valuable metals can be profitably extracted.
Froth Floatation
A concentration technique for sulphide ores where air is blown through an agitated mixture of crushed ore, water, and oil to float the hydrophobic mineral particles while gangue sinks.
Slag
A molten waste byproduct, such as calcium silicate (CaSiO3), formed by the reaction of a flux (CaO) with acidic impurities (SiO2) in a smelting furnace.
Blister Copper
A 97.5% pure form of copper produced during extraction, named for its rough blistered surface created by escaping bubbles of sulphur(IV) oxide (SO2) gas during solidification.
Duralumin
An aluminium alloy containing approximately 95% aluminium together with copper, magnesium, iron, and silicon, valued for high tensile strength, lightness, and corrosion resistance.
Radioactivity
The spontaneous disintegration of an unstable atomic nuclide to yield a different nuclide with the emission of particles and electromagnetic energy.
Nuclide
A distinct nuclear species characterized by a specific number of protons and neutrons in its nucleus.
Alpha (α) Particle
A positively charged nuclear radiation particle consisting of two protons and two neutrons, identical to a helium nucleus (24He2+), with high ionizing power and low penetrating power.
Beta (β) Particle
A fast-moving electron (−10e) emitted from the nucleus of an atom when a neutron converts into a proton during radioactive decay.
Gamma (γ) Ray
High-frequency electromagnetic radiation of nuclear origin with zero mass and zero charge, having very high penetrating power and low ionizing power.
Nuclear Fission
The splitting of a heavy, unstable atomic nucleus into lighter nuclei, accompanied by the release of neutrons and a large quantity of energy when bombarded by a neutron.
Nuclear Fusion
The combination of small atomic nuclei to form a heavier nucleus, accompanied by the release of a massive amount of energy.
Half-Life Period (t1/2)
The time required for half the original number of radioactive nuclides or atoms in a given sample to decay spontaneously.