1/87
Looks like no tags are added yet.
In a hydroelectric power plant, the tailwater level is fixed at 350 m. The net head is 32 m, and the head loss is 6% of the gross head. What is the headwater elevation?
384.0 m
In a hydro plant, the brake power is 2,100 kW, the turbine runs at 500 rpm, and the net head is 28 m. Determine the specific speed of the turbine.
93.3 rpm
Water falls from a height of 55 m with a flow rate of 0.9 m^3/s, driving a turbine at 180 rpm. The resisting torque is 520 N-m, and the velocity of water leaving the blades is 5 m/s. Calculate turbine power output.
487.0 kW
A Pelton turbine is installed 30 m below the head gate. Head loss due to friction = 12% of head. Penstock length = 70 m, coefficient of friction = 0.00095. Find the maximum power that can be delivered?
17,604 kW
A turbine runs at 420 rpm, specific speed = 62 rpm, available head = 45 m. If each turbine is rated 120 kW, how many turbines must be installed for a 600-kW plant?
5
Head race - tail race = 200 m, penstock friction loss = 10 m. Flow = 3.0 m^3/s. Turbine friction loss = 70 kW, leakage = 0.03 m^3/s. Generator efficiency = 95%. Find electrical power output.
5259 kW
The specific speed of a turbine is 70 rpm and it runs at 420 rpm. If the net head is 30 m and generator efficiency is 95%, what is the maximum power output of the generator?
1,892 kW
In a Francis turbine, the casing pressure gauge reads 400 kPa and its centerline is 3 m above the tailrace. Water enters with 8.5 m/s velocity. Find the net head.
47.5 m
A hydro plant produces 50,000,000 kwh annually, Flow = 1600 m^3/min, overall efficiency = 66%. Find the net head.
33 m
In a 12 MW geothermal power plant, steam flow is 22 kg/s. After throttling, steam quality = 27%, and enthalpy of ground water = 760 kJ/kg. Find overall efficiency.
19.4%
A geothermal plant has ground water flow 50 kg/s. Quality of hot water entering flash tank = 10%. Find mass of steam entering turbine.
5.0
A 20,000-kW geothermal plant has a generator efficiency of 92% and turbine efficiency of 82%. If the steam quality after throttling is 18% and each well discharges 230,000 kg/hr, determine the number of wells required if the enthalpy drop across the turbine is 520 kJ/kg.
5 wells
A liquid-dominated geothermal plant with a single-flash separator receives water at 206°C. Separator pressure = 1.1 MPa, condenser at 0.035 MPa, turbine efficiency = 0.85, cycle output = 42 MW. Find the mass of ground water in kg/s.
At 206°C: hf = 872 kJ/kg
At 1.1 MPa: hf = 772, hfg = 2010, hg = 2782, sg = 6.58
At 0.035 MPa: hf = 302, hfg = 2329, sf = 0.98, sfg = 6.75
1813
A gas turbine in a combined cycle plant produces 75 MW. The heat recovery steam generator uses the exhaust heat to produce 35 MW from the steam turbine. Determine the combined plant output.
110 MW
A combined cycle power plant uses a gas turbine receiving 180 MW of fuel energy. The gas turbine has a thermal efficiency of 34%, and 70% of the remaining exhaust energy is recovered in the HRSG. If the steam cycle converts 28% of the recovered heat into work and plant auxiliaries consume 4 MW, determine the net plant efficiency.
44.71%
A combined cycle generating station consists of a Brayton topping cycle and a Rankine bottoming cycle. The gas turbine produces 120 MW while operating at 38% efficiency. If the steam turbine efficiency is 29%, determine the combined cycle efficiency.
55.98%
A combined gas-steam powerplant produces 15MW at the gas turbine shaft. The gas turbine operates with an efficiency of 25%. The exhaust heat is passed through a waste heat recovery boiler to operate the steam turbine plant having an efficiency of 32%. Determune the power output of the stream
14.40
In a mercury-steam-sulphur dioxide composite cycle, the heat rejected from the mercury cycle is supplied to the steam cycle, while the heat rejected from the steam cycle is used in the SO2 cycle. If the efficiencies of the composite steam, and SO2 cycles are 0.55, 0.35, and 0.20, respectively, determine the overall efficiency of the composite cycle.
76.60%
Combined gas and steam power plant produces 12 MW at the gas turbine shaft. The gas turbine has an efficiency of 0.24. The exhaust from the gas turbine is supplied to a WHRB, which operates a steam turbine plant having an efficiency of 0.30. Calculate the heat rate of the combined cycle power plant.
7692 kJ/kWh
A nuclear power plant produces 650 MW of electrical power from an overall efficiency of 32%. Determine the thermal power generated by the reactor.
2031.25 MW
A nuclear power plant has a heat rate of 11 250 KJ/Kwh. Determine the thermal efficiency of the plant?
32.00 %
A nuclear fuel sample initially contains 64 g of a radioactive material. If the half-life is 8 days, determine the remaining mass after 24 days.
8 grams
A radioactive material has a half-life of 5 years. Determine the decay constant per year.
0.1386 per year
A radioactive fuel sample has an activity of 600 MBq. After 15 years, its activity is reduced to 75 MBq. Determine the half-life of the material.
5 years
An ocean thermal energy conversion (OTEC) plant utilizes warm surface seawater at 84°F and cold deep seawater at 44°F. Determine the maximum theoretical thermal efficiency of the plant.
7.35%
An inventor plans to develop a small vehicle powered entirely by solar energy. The solar panels installed on the vehicle can convert 12% of the incident solar radiation into electrical energy. If the average solar radiation is 0.160 kW/m^2 and the vehicle requires 1.20 kW of power, determine the required area of the solar panels.
7.50m^2
A wind turbine receives wind at a velocity of 12 m/s. If the rotor diameter is 20 m and the air density is 1.225 kg/m^3, determine the theoretical wind power available.
333 kW
A wind turbine farm located in Northern Luzon produces a total of 48 MW using 24 wind turbines. Each turbine has a blade radius of 12 m and rotates at 18 RPM. If the wind velocity in the area is 14 m/s, determine the velocity of the wind relative to the blade tip.
26.60 m/s
A horizontal-axis wind turbine installed in a coastal wind farm has a blade radius of 12 m and operates at a wind speed of 9 m/s. Determine the maximum power generated at STP.
126.14 kW
A wind turbine is connected directly to a generator and battery storage system. The generator delivers 12 kW of power, while the combined losses due to electrical resistance and battery heating amount to 1.5 kW. Determine the total energy stored in the battery over a period of 8 hours.
3.02 x 10^5 kJ
A wind turbine is connected directly to a generator and battery storage system. The generator delivers 12 kW of power, while the combined losses due to electrical resistance and battery heating amount to 1.5 kW. Determine the total energy stored in the battery over a period of 8 hours.
3.02 x 10^5 kJ
Which component in a combined cycle plant produces electricity first?
Gas turbine
Which cycle governs the topping cycle in combined cycle plants?
Brayton cycle
Which fuel is most commonly used in combined cycle plants?
Natural gas
What type of HRSG is most commonly used in large combined cycle plants?
Drum-type
Which cooling system is most common in combined cycle plants?
Wet cooling tower
Which cooling method is preferred in water-scarce regions for combined cycle plants?
Dry cooling tower
Which advantage makes combined cycle plants suitable for base-load operation?
High efficiency
Which section of HRSG transfers heat to water at saturation temperature?
Evaporator
Which factor affects steam turbine last stage blade erosion?
Steam moisture content
Which part of combined cycle plant usually governs ramp rate?
Steam Turbine
What happens to steam turbine work if gas turbine exhaust decreases in a combined cycle?
Decreases
Which cycle arrangement gives maximum output in CCPP?
Triple-pressure with reheat
Which law relates flow through orifices to velocity head?
Torricelli's theorem
Which type of hydroelectric plant has no storage reservoir?
Run-of-river plant
Which hydroelectric plant uses water stored during off-peak for reuse?
Pumped storage plant
What part of the impeller has the highest speed?
Tip
What part of a turbine is responsible for the main energy transformation?
Runner
Which code governs hydro turbine performance testing?
IEC 60193
Which plant supplies quick power for peak demand?
Pumped storage hydro plant
Which law applies to velocity triangles in turbines?
Euler's turbine equation
Which type of turbine is most suitable for tidal hydro power?
Bulb turbine
What type of turbine is a pelton wheel?
Impulse Turbine
Which law relates to conservation of energy in fluid flow?
Bernoulli's theorem
Which type of dam is most economical for narrow valleys?
Arch dam
Which dam type uses mass to resist water pressure
Gravity dam
Which country is among the world leaders in geothermal electricity production?
Philippines
Which type of geothermal power plant is used when reservoir fluid is below boiling point?
Binary cycle plant
Which geothermal field is one of the oldest in the world?
Larderello (Italy)
Which code governs pressure vessels used in geothermal plants?
ASME BPVC
Which geothermal system requires hydraulic fracturing to enhance permeability?
Hot Dry Rock system
What is the theoretical maximum efficiency of a wind turbine as per Betz's limit?
59.3%
Which working principle governs photovoltaic cell operation?
Photoelectric effect
Which isotope of uranium is most commonly used as fuel in nuclear reactors?
U-235
Which safety barrier is the last line of defense in nuclear plants?
Containment Structure
Which term refers to the sudden shutdown of a nuclear reactor?
SCRAM
Which coolant is used in fast breeder reactors?
Liquid sodium
Which fuel fabrication process shapes uranium dioxide into pellets?
Sintering
A nuclear plant has fuel sample initially contains 64g of radio active material the half life is 8 days, determine the remaining mass after 14 days
8g
Which part of geothermal powerplant rejects unused heat?
Condenser
Which standard applied to geothermal drilling safety?
API RP 53
Which type of geothermal plant is most effective for low temperature reservoirs
Binary Cycle Plant
Which geothermal plant type is most efficient for high-temperature reservoirs?
Flash steam plant
Which drilling method is commonly used in geothermal wells?
Rotary drilling
Which geothermal field is the largest in the Philippines
Leyte Geothermal Field
What is the most important factor in a tidal barrage system
Tidal Range
What is the preferred distance between wind turbines?
About 7-10 rotor diameters
Which renewable source depends on the kinetic energy of moving air
Wind energy
Which device converts DC from PV panels to AC for grid use
Inverter
Which type of wind turbine rotor resembles an eggbeater?
Darrieus rotor
Which factor governs tidal energy output?
Tidal range and basin area
Which non-conventional source is directly linked with photosynthesis?
Biomass Energy
Which International standard applied to grid-connected PV inverters
IEC 62109
Which safety barrier is the last line of defense in nuclear plants
Containment structure
Which cycle describes the thermodynamics of nuclear power plants?
Rankine cycle
Which Radioactive gas is a byproduct of fission and needs monitoring
Xenon-135
Which phenomenon occurs when reactor power increases rapidly due to voids in coolant?
Positive void coefficient?
Which isotope is the main fissile product in plutonium fuel?
Pu-239