1/33
Looks like no tags are added yet.
What is the Pauli exclusion principle?
It states that no two electrons in the same atom can have the same four quantum numbers (n, ms, l, ml)
What are electrostatic effects? How do they play a role in determining energy states of many-electron atoms?
Electrostatic effects involves the attraction of opposite charges and repulsion of like-charges.
They play a major role in determining energy states since many-electron atoms behave differently than hydrogen atoms in having more than one electron.
Why is the many-electron model (atoms having multiple electrons) difficult to manage than what a hydrogen atom would have?
It’s mainly because of electron repulsions, where electrons “shield” or “blocks” other electrons to the extent that one electrond eos not feel the full nuclear charge.
What is electron shielding? If this is high, what does that mean?
This is when an electron affects another electron’s effective nuclear charge (Zeff).
If this is high, then it makes the electrons easier to remove bceause it seems as if there were fewer protons on the nucleus than there actually are.
Since inner electrons spend nearly all of their time between outer electrons and the nucleus, do they have a higher or lower Zeff? Why?
They have a higher Zeff because they are closer to the nucleus and experience less shielding from other electrons.
Outer electrons experience MORE shielding from inner electrons, reducing the Zeff they feel.
Look at the image!

What is effective nuclear charge (Zeff)? The higher the Zeff…
This is the NET POSITIVE charge an electron has from the nucleus AFTER accounting for electron shielding.
The higher the Zeff, the easier it is to attract electrons or hold onto them.
What is penetration? What are the effects?
This is the ability of an electron to get closer to the nucleus.
The effects of penetration allows it to INCREASE nuclear attraction for a 2s electron over 2p, AND it DECREASES the shielding of a 2s electron by the 1s electrons.
Why does it take more energy to remove a 2s electron than a 2p electron?
It take more energy because the 2s electron is closer to the nucleus and experiences less shielding.
Why is the 2s sublevel closer to the nucleus than the 2p sublevel?
It isi closer because the 2s sublevel has more penetration than the 2p level, meaning 2s electrons have a higher change of being found closer to the nucleus. Therefore, the 2s electrons have less shielding and MORE Zeff, making them more strongly attracted to the nucleus.
The lower the l-value of a sublevel…
the more its electrons penetrate closer to the nucleus, allowing greater attraction to the nucleus.
What is an orbital diagram?
This simply shows a box for each orbital in a given energy level, grouped by sublevel representing each electron and its spin.
Look at image

What does Hund’s rule state?
It states that when orbitals of equal energy are available, the electron configuration of the LOWEST energy has the maximum number of unpaired electrons with parallel spins.
Basically, just know that electrons will fill each suborbital BEFORE completing the first, second, third, etc., sublevel.
look at image (specifically oxygen and nitrogen)

Write the electron configuration of sulfur in its normal form. Then, write the condensed electron configuration.
Normal Configuration: 1s2 2s2 2p6 3s2 3p4
Condensed: [Ne] 3s2 3p4
Write the normal electron configuration for Cr (24) and Cu (29). Then, write the condensed form.
Normal form Cr: 1s2 2s2 2p6 3s2 3p6 4s1 3d5
Normal form Cu: 1s2 2s2 2p6 3s2 3p6 4s1 3d10
Condensed form Cr: [Ar] 4s1 3d5
Condensed form Cu: [Ar] 4s1 3d10
Write the normal electron configuration for Br (35)
1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p5
Write the electron configuration (normal) for Te (52).
1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p4
What is the difference between inner (core) electrons, outer electrons, and valence electrons?
Inner (core) electrons are those an atom has in common with the previous noble gas and any completed transition series. They fill all the LOWER energy levels. (aka, think of this as [Ne] [Ar] any shortcut!
Outer electrons are those in the highest energy level (n-level). So like 3s2 3p6 has 8. 4s2 3d5 has 2.
Valence electrons are the outermost electrons that participate in bonding. Look CAREFULLY at the screenshot for valence electrons!
![<p>Inner (core) electrons are those an atom has in common with the previous noble gas and any completed transition series. They fill all the LOWER energy levels. (aka, think of this as [Ne] [Ar] any shortcut!<br><br>Outer electrons are those in the highest energy level (n-level). So like 3s<sup>2</sup> 3p<sup>6</sup> has <strong>8</strong>. 4s<sup>2</sup> 3d<sup>5</sup> has <strong>2</strong>. <br><br>Valence electrons are the outermost electrons that participate in bonding. Look CAREFULLY at the screenshot for valence electrons!</p>](https://assets.knowt.com/user-attachments/f1b74273-04c0-416d-821c-dd3268f357d6.png)
How do you find the atomic size in metallic radii?
You take ½ of the shortest distance between the nuclei of an adjacent, individual atom in a crystal of the element.
Look at image

How do you find the atomic size of covalent radii?
You take ½ of the shortest distnace between the nucleus of bonded atoms.
Look at image and note SPECIFICALLY where those two atoms collide—that’s your radius!

As you move to the right of the periodic table, atomic size (increases/decreases). Why?
As you move down the periodic table, atomic size (increases/decreases). Why?
It decreases because the effective nuclear charge increases (electrons stick closer to that nucleus!)
It increases as you move down because the principal quantum number increases (n), so the probability of electrons spending most of their time farther from the nucleus increases.
What is ionization energy? Is this energy always positive/negative? Why?
This is the energy required to remove 1 mol of electons from 1 mol of gaseous atoms/ions.
This energy is always positive because you’re always inputting energy from the system to remove that electron whose protons have a good grip on it!
Atoms with a high ionization energy…
Are less likely to remove 1 mol of electrons per 1 mol of gaseous atoms/ions because it takes so much energy to remove it!
What happens to ionization energy as we move down groups? Why?
Ionization energy will decrease as you move down groups beause the principle quantum number (n) increases, making it easier for electrons to be pulled away from their nucleus SINCE the radius is growing.
Name the period 3 element with the following ionization energies (kJ/mol), and write its full electron configuration:
IE1: 1012
IE2: 1903
IE3: 2910
IE4: 4956
IE5: 6258
IE6: 22,230
It’s phosphorus because there’s only a significant jump after the IE5, meaning there’s 5 valence electrons.
P electron configuration: 1s2 2s2 2p6 3s2 3p3
What is electron affinity?
This the change in energy when an electron is ADDED to a neutral atom in the gas phase. Similar to the tendency of an atom to GAIN electrons.
Look at the example

Here are the trends toward electron affinity. There’s a ton of exceptions, so rely on the notes you take in class for a better understanding.
Look at the image.

As elements become more metallic down a group (larger n and smaller IE), their oxides become more ____. Why?
basic; Rememebr that as we move down, metallic character increases, IE decreases, and metal more READILY lose electrons because of that. As a result, their oxidies become more ionic, allowing more O2- to act as a strong base by accepting protons from water (making OH-).
Look at image

As elements become less metallic across a period (smaller size and higher IE), their oxides become more ___. Why?
acidic; Remember that as we move to the right, we become more covalent. Ionization energy will increase, and elements become less likely to lose electrons (and therefore gain protons). Their oxides become more covalent rather than ionic, and will therefore react with water to donate a proton.
Look at image

Using electron configuration to describe this, explain what the GOAL of a chemical equation is…
The goal of a chemical equation is to fill the outer shell of the formed compound—that way, it is the most stable.
Using condensed electron configurations, write equations representing the formation of the ion(s) of the following elements:
Iodine (Z = 53)
Potassium (Z = 19)
iodine
I [Kr] 5s2 4d10 5p5 + e- —> I- [Kr] 5s2 4d10 5p6
^^ Remember the goal is to FILL the outermost shell to become the most stable
potassium
K [Ar] 4s1 —> K+ [Ar] + e-
What does it mean for an atom/ion to be paramagnetic? What about diamagnetic?
Paramagnetic is when an atom/ion has at least one unpaired electron. Therefore, it is attracted to an external magnetic field.
Diamagnetic is when an atom/ion has ALL electrons paired. It is weakly repelled by an external magnetic field because it’s stable!
Use condensed electron configurations to write an equation for the formation of each transition metal ion, and predict whether it is paramagnetic:
Co3+ (Z = 27)
Cr3+ (Z = 24)
Cobalt
Co [Ar] 4s2 3d7 —> Co3+ [Ar] 3d6 + 3e-.
cobalt IS paramagnetic because in it’s Co stage, there’s four electrons it’s missing to have all of them paired.
Chromium
Cr [Ar] 4s1 3d5 —> Cr3+ [Ar] 3d3 + 3e-
chromium is paramagnetic because in the Cr stage, there’s 3 unpaired electrons.
Look at the image for chromium’s explanation
![<p>Cobalt<br>Co [Ar] 4s<sup>2</sup> 3d<sup>7</sup> —> Co<sup>3+</sup> [Ar] 3d<sup>6</sup> + 3e<sup>-</sup>. </p><p><strong>cobalt IS paramagnetic because in it’s Co stage, there’s four electrons it’s missing to have all of them paired. </strong><br><br>Chromium<br>Cr [Ar] 4s<sup>1</sup> 3d<sup>5</sup> —> Cr<sup>3+</sup> [Ar] 3d<sup>3</sup> + 3e<sup>-</sup> <br><strong>chromium is paramagnetic because in the Cr stage, there’s 3 unpaired electrons</strong>. <br><br>Look at the image for chromium’s explanation</p>](https://assets.knowt.com/user-attachments/fc159e3d-6576-48dc-8c1b-6243caf9f7d4.png)
What is ionic radius? How do you find it?
This is the size of an ion’s radius—duh. This is found by taking the distance between the nuclei of adjacent ions in a crystalline compound.
Look at image

Cations are (smaller/larger) than parent atoms. Why?
Anions are (smaller/larger) than parent atoms. Why?
Cations are smaller. This is because when they form, electrons are REMOVED from the outer level, decreasing shielding and allowing the nucleus to pull the remaining electrons closer.
Anions are larger. This is because they GAIN electrons from the cations, increasing shielding and therefore the size.