1/95
Looks like no tags are added yet.
What does the signal word DANGER indicate on a chemical label?
A more severe hazard; it may indicate fatal or serious hazards.
What does WARNING indicate on a chemical label?
A less severe hazard category than DANGER.
What does the red section of the NFPA diamond indicate?
Flammability.
What does the blue section of the NFPA diamond indicate?
Health hazard.
What does the yellow section of the NFPA diamond indicate?
Instability or reactivity.
What does the white section of the NFPA diamond indicate?
Special hazards.
What does a higher NFPA hazard number mean?
A greater hazard; 0 is least and 4 is greatest.
What document provides chemical hazards, storage, and first aid information?
Safety Data Sheet (SDS).
What should you do before using unfamiliar laboratory equipment?
Ask the instructor for guidance.
What should you do if a corrosive chemical spills on your glove?
Remove the contaminated glove safely and immediately wash the affected area as directed by the lab safety procedure.
Why are food and drinks prohibited in the laboratory?
To prevent accidental ingestion of hazardous materials.
What should you do if a small fire starts in the lab?
Notify the instructor; use a fire extinguisher only if trained and evacuate if necessary.
What is the metric base unit for mass used in this lab course?
Gram.
What is the metric unit for volume?
Liter.
What happens to the decimal when converting a larger metric unit to a smaller one?
Move the decimal to the right.
How many microliters are in 1 milliliter?
1000 microliters (µL).
Convert 0.08 mL to microliters.
80 µL.
What tool measures small liquid volumes accurately?
A micropipette appropriate for the target volume.
Which is more accurate for measuring liquid volume: a beaker or a graduated cylinder?
A graduated cylinder.
What is accuracy?
How close a measurement is to the true or accepted value.
What is precision?
How close repeated measurements are to one another.
What does standard deviation describe?
How spread out data values are around the mean.
What makes a scientific observation more reliable?
Measurable data rather than personal opinion.
What is the usual next step after forming a hypothesis in the scientific method?
Conduct an experiment.
What is an independent variable?
The factor deliberately changed by the experimenter.
What is a dependent variable?
The factor measured as the outcome.
Why are controls used in an experiment?
To help determine whether the experimental outcome is valid.
What is a positive control?
A control expected to produce a positive result and confirm the test works.
What is a negative control?
A control expected not to produce the positive result.
What characteristics make a good experiment?
Controls, reproducibility, and multiple trials.
What is pH?
The negative logarithm of hydrogen ion concentration.
If hydrogen ion concentration is 1 × 10⁻⁶ M, what is the pH?
pH 6.
What pH is acidic?
Below 7.
What pH is neutral?
pH 7.
What pH is basic?
Above 7.
What is a buffer?
A substance or solution that resists changes in pH when acid or base is added.
If one antacid needs 25 drops of acid to change color and another needs 5, which has greater buffering capacity?
The antacid requiring 25 drops.
What does Biuret reagent test for?
Proteins.
What positive result is expected with Biuret reagent?
A violet or purple color.
What does Lugol's iodine test for?
Starch.
What positive result is expected with Lugol's iodine and starch?
Blue-black color.
What does Benedict's reagent test for?
Reducing sugars.
Which biochemical test requires heating?
Benedict's test.
What colors can a positive Benedict's test produce?
Green, yellow, orange, or brick red, depending on the amount of reducing sugar.
Which sugars are reducing sugars: glucose, fructose, galactose, or sucrose?
Glucose, fructose, and galactose are reducing sugars; sucrose is generally nonreducing in this test.
What does Sudan IV test for?
Lipids.
What does a vivid red or orange spot with Sudan IV indicate?
Lipids are present.
What does a sample likely contain if it tests negative with Biuret, Lugol's iodine, and Benedict's but gives a vivid red spot with Sudan IV?
Lipids, with no positive evidence for proteins, starch, or reducing sugars in those tests.
Why use both positive and negative controls in biochemical tests?
To check that reagents work and observed color changes are meaningful.
What does a spectrophotometer measure?
Light absorbance by a sample.
What holds the liquid sample inside a spectrophotometer?
A cuvette.
Why should a cuvette be held by its top edges?
Fingerprints on the light path can interfere with readings.
What is the purpose of a blank cuvette?
To set the absorbance baseline and account for the solvent or other components in the blank.
What is a standard curve used for?
To relate measured absorbance to known concentrations so an unknown concentration can be estimated.
Does every Skittle candy tested necessarily contain only one dye?
No. A candy's color may contain more than one dye.
What is diffusion?
Net movement of particles from higher concentration to lower concentration.
What happens to net diffusion at equilibrium?
There is no net movement, although particles continue moving randomly.
Which type of diffusion requires membrane proteins?
Facilitated diffusion.
Does facilitated diffusion require energy?
No. It is passive transport.
What is osmosis?
Net movement of water across a selectively permeable membrane.
What is active transport?
Movement of substances that requires energy, often against a concentration gradient.
What happens to a plant cell in a hypertonic solution?
Water leaves the cell and plasmolysis may occur.
What is plasmolysis?
The plant cell membrane and cytoplasm pull away from the cell wall as water leaves.
What happens to plant cells in a hypotonic solution?
Water enters the cells and turgor pressure generally increases.
What happens to a cell in an isotonic solution?
There is no net movement of water.
What is the purpose of Gram's iodine in the diffusion and osmosis lab quiz context?
To detect starch.
What is one limitation of dialysis tubing as a model of a plasma membrane?
It does not represent all the structures and selective functions of a real plasma membrane.
Which factors can affect the rate of diffusion?
Temperature, the medium, and molecule size; charge and membrane properties can also affect movement in particular systems.
How does increased temperature generally affect diffusion rate?
It increases the rate because particles move faster.
What are the two microscope lens systems that magnify an image?
The ocular lens and objective lens.
How do you calculate total magnification?
Multiply ocular magnification by objective magnification.
What is total magnification with a 10× ocular and a 40× objective?
400×.
Which objective should you start with when focusing a specimen?
The lowest-power objective, commonly 4×.
Which microscope part regulates light passing through the specimen?
The diaphragm.
What does the microscope stage do?
Supports the slide.
What is the function of coarse focus?
Moves the stage or body tube substantially for initial focusing, usually at low power.
What is the function of fine focus?
Makes small adjustments to sharpen the image.
Which structures may be visible in Elodea plant cells?
Cell wall, chloroplasts, and central vacuole, depending on the preparation and visibility.
Which structure surrounds plant cells but not animal cells?
The cell wall.
What stain was used to help visualize the nucleus in cheek cells?
Methylene blue.
Which organelle was visible in cheek cells and can also be visible in plant cells under a light microscope?
The nucleus.
How should a microscope be stored after use?
With the lowest-power objective in position, the stage lowered, and the microscope properly secured.
What is an enzyme?
A biological catalyst that speeds up a chemical reaction.
What is a substrate?
The molecule upon which an enzyme acts.
What is an active site?
The region of an enzyme where the substrate binds and the reaction occurs.
What are products in an enzyme reaction?
The substances formed from the substrate during the reaction.
What is denaturation?
A change in a protein's structure that can prevent it from functioning properly.
What can boiling temperatures do to an enzyme?
Denature it by disrupting its three-dimensional structure and reducing activity.
What does cold temperature generally do to enzyme activity?
Slows the reaction; cold does not necessarily denature the enzyme.
What enzyme was studied in the enzyme lab quiz?
Peroxidase.
What is guaiacol used for in the peroxidase experiment?
It acts as a reaction indicator substrate/reagent whose color change can be followed by absorbance.
Why is the enzyme often added last in a reaction setup?
To start the reaction consistently so timing is controlled.
Why must spectrophotometer readings be timed consistently?
The reaction changes over time, so inconsistent timing makes results difficult to compare.
What is the purpose of keeping an enzyme on ice before use when specified by the protocol?
To help preserve enzyme activity until the reaction begins.
How can enzyme reaction rate be estimated from absorbance data?
Measure the change in absorbance over a defined time interval.
Can I determine the exact temperature at which peroxidase had its highest rate from the quiz question alone?
No. Check the lab's recorded data or procedure; the quiz choices alone do not identify the correct temperature.