1/29
Comprehensive review flashcards covering antibody structure, agglutination and precipitation mechanisms, canine and feline blood typing, failure of passive transfer evaluation, serology (HA, HI, VN), and feline SNAP testing.
What four foundational questions must be addressed for every diagnostic laboratory result?
How are an antigen, an epitope, and an antibody distinguished?
An antigen is a molecular target recognized by an immune receptor; an epitope is the specific part of an antigen that is recognized; and an antibody is an immunoglobulin that binds a particular epitope.
What are the structural functions of the Fab, Hinge, and Fc regions of an antibody?
The Fab region mediates antigen recognition at the binding sites; the Hinge provides flexibility for binding and cross-linking separate targets; and the Fc region interacts with effector systems.
What produces the visible result in agglutination, immune precipitation, and chemical precipitation?
Agglutination is produced by cross-linking particles or cells (e.g., blood typing); immune precipitation is produced by cross-linking soluble antigens (e.g., AGID/RID); and chemical precipitation is produced by reduced protein solubility via salting out without antigen-specific binding (e.g., sodium sulfite).
Why might a sample fail to show a visible aggregate even if the target antigen is present?
Visible aggregate formation requires linking targets into a lattice; an excess of either antigen or antibody alters optimal proportions and can reduce or prevent visible lattice formation.
What red-cell blood groups are emphasized for dogs and cats?
Dogs are evaluated as DEA 1 positive or DEA 1 negative (a major transfusion antigen); cats are typed as A, B, or AB (Type A is most common overall).
What specific reagent is placed in each blood-typing well, and what target does it bind on patient red cells?
The Canine DEA 1 well contains monoclonal anti-DEA 1 targeting the DEA 1 antigen; the Feline A well contains anti-A antibody targeting the A antigen; and the Feline B well contains a lectin targeting a B-associated carbohydrate.

On this canine blood typing card, what are the specific clinical roles of the Auto-Agglutination Saline Screen and the Positive Control well?
The Auto-Agglutination Saline Screen identifies pre-existing clumping that would obscure or invalidate a specific reaction, and the Positive Control must show expected agglutination to prove reagent reactivity before interpreting the patient well.
How are valid blood-typing patterns interpreted for canine and feline test wells?
Canine: Agglutination indicates DEA 1 positive; remaining smooth indicates DEA 1 negative. Feline: Agglutination in A only indicates Type A; agglutination in B only indicates Type B; agglutination in both wells indicates Type AB; agglutination in neither well is invalid.
Why can an incompatible first blood transfusion cause severe acute reactions in a Type B cat but rarely in a DEA 1-negative dog?
Type B cats have strong naturally occurring anti-A antibodies that can trigger an immediate severe reaction upon first exposure. In contrast, DEA 1-negative dogs usually lack naturally occurring anti-DEA 1 antibodies and only become sensitized following an incompatible exposure.
What is the biological role of passive transfer in foals and calves?
The dam supplies preformed maternal antibodies via early colostrum to provide immediate, temporary systemic protection while the neonate gradually develops its own adaptive immune responses, without establishing recipient memory.
What is gut closure, and how does it influence oral colostrum administration in neonates?
Gut closure is the progressive loss of the neonate's intestinal ability to absorb intact maternal immunoglobulins into systemic circulation, making oral colostrum an unreliable route to raise serum IgG beyond the initial hours after birth (teaching boundary of 24hours).
What are the four primary causes of failure of passive transfer (FPT)?
What are the serum IgG concentration categories and clinical interpretations for neonatal foals?
<400mg/dL: Failure of passive transfer (markedly inadequate transfer); 400–800mg/dL: Partial failure (assess risk and clinical status); >800mg/dL: Adequate transfer (continue clinical assessment).
How does the sodium sulfite test work to estimate foal immunoglobulin levels?
Sodium sulfite acts via salting out by reducing protein solubility to produce visible turbidity or precipitation; samples with low immunoglobulin concentrations require higher salt concentrations to precipitate.
How are sodium sulfite precipitation patterns across 14%, 16%, and 18% tubes interpreted in foals?
− at 14%, − at 16%, + at 18% indicates <400mg/dL IgG; − at 14%, + at 16%, + at 18% indicates 400–800mg/dL IgG; + at 14%, + at 16%, + at 18% indicates >800mg/dL IgG.

In the SNAP Foal IgG assay shown, how is the patient sample spot interpreted against the calibrator spots?
The sample spot color intensity is compared directly to reference spots for 400mg/dL and 800mg/dL; a spot lighter than the 400mg/dL spot indicates <400mg/dL IgG, and a spot matching the 400mg/dL spot indicates approximately 400mg/dL IgG.
What are the relative advantages and limitations of sodium sulfite, SNAP Foal IgG, and radial immunodiffusion (RID)?
Sodium sulfite: Low-cost serum screening, but provides only a coarse, nonspecific estimate. SNAP Foal IgG: Rapid comparison usable on whole blood, but yields a semiquantitative visual result. Radial immunodiffusion: Provides IgG-specific quantification using standards, but has a slower turnaround.
Why does a 72-hour-old foal with an IgG of 250mg/dL require intravenous plasma rather than oral colostrum?
At 72hours of age, gut closure has occurred and intact immunoglobulins can no longer be absorbed from the intestine into the blood; intravenous plasma is required to supply circulating systemic IgG directly.
What are the biological phenomena observed and supported by Hemagglutination (HA), Hemagglutination Inhibition (HI), and Hemadsorption (HAd)?
HA: Red cells form a diffuse lattice, demonstrating viral hemagglutinating activity. HI: Specific antibody prevents lattice formation, demonstrating inhibitory antibody activity. HAd: Red cells adhere to infected host cell surfaces, demonstrating viral surface proteins.

Based on the settling patterns shown, how are a diffuse mat and a compact button interpreted in a Hemagglutination Inhibition (HI) assay?
A diffuse mat indicates hemagglutination (red blood cells cross-linked into a lattice); a compact button indicates no hemagglutination (unlinked red blood cells settle freely to the bottom), which confirms antibody inhibition in a valid HI assay.
What is an antibody titer, and how is an HI endpoint reported if inhibition persists through 1:80 versus failing at the initial 1:5 dilution?
An antibody titer is the reciprocal of the highest serum dilution (endpoint) showing activity. If inhibition persists through 1:80, it is reported as 1:80 (or reciprocal titer 80); if no inhibition occurs at 1:5, it is reported as <1:5 (below assay detection threshold).
In paired serology, what titer change demonstrates active seroconversion or significant response?
A fourfold or greater rise in antibody titer between acute and convalescent sera (equivalent to two steps in a twofold dilution series, such as <1:5 to 1:40 or 1:10 to 1:40).
What four origins can account for detectable circulating antibody in an animal?

What cell culture phenomenon is shown in this image, and what does it indicate in a Virus Neutralization (VN) assay?
Cytopathic effect (CPE), characterized by cell damage, rounding, and detachment, which indicates that serum neutralizing antibody was insufficient to prevent viral infection of the cells.

How are purple/blue stained wells versus pale/clear wells interpreted in this Virus Neutralization (VN) plate?
Deep blue or purple wells indicate an intact monolayer of adherent cells protected from viral killing (successful neutralization); pale or clear wells indicate cell detachment and loss due to uninhibited viral cytopathic effect.
What analytes are measured by the FIV spot and the FeLV spot on a feline SNAP combo device?
The FIV sample spot detects host antibodies against FIV; the FeLV sample spot detects viral p27 antigen.
Why does prior vaccination against feline leukemia virus (FeLV) not cause a positive result on an FeLV SNAP test?
The FeLV SNAP test detects the viral capsid antigen (p27), not host antibodies; FeLV vaccines induce an antibody response, which does not produce circulating viral p27 antigen.

Why is this feline SNAP combo test result classified as invalid?
The negative control spot (bottom) developed visible color that equals or exceeds the sample spots, which violates assay validity criteria.
What are the formulas and diagnostic definitions for diagnostic sensitivity and specificity?
Sensitivity: TP+FNTP, representing the proportion of diseased animals with positive test results (higher sensitivity yields fewer false negatives). Specificity: TN+FPTN, representing the proportion of disease-free animals with negative test results (higher specificity yields fewer false positives).