Module 4.2: The Structure of Polymers

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/36

flashcard set

Earn XP

Description and Tags

Comprehensive vocabulary flashcards covering the structure, properties, classifications, processing techniques, and sustainability considerations of polymers from Module 4.2.

37 Terms

1
New cards

Monomer

A low-molecular-weight repeat molecular unit that covalently bonds into long repetitive chains during polymerization to build a polymer.

2
New cards

Addition Polymerization

A reaction process wherein monomer units containing double bonds (such as methyl methacrylate forming PMMA) link together sequentially without forming chemical byproducts.

3
New cards

Molecular Weight (in Polymers)

The mass of polymer chains, determined by reaction conditions (such as temperature, reactant ratios, catalysts, or inhibitors) and chemistry, typically quantified in kilodaltons or by total repeat units.

4
New cards

High Molecular Weight Effects

Increases service temperature, elastic modulus, density, chemical resistance to dissolution, strength, and toughness because longer chains create more secondary bonds that hinder chain motion.

5
New cards

Side Groups (Pendant Groups)

Functional chemical groups larger than hydrogen that are covalently bonded to and hang off the main polymer backbone, strongly influencing chain sliding and packing efficiency.

6
New cards

Homopolymer

A polymer architecture composed entirely of identical repeat units along its backbone (e.g., polystyrene), which can assume linear or branched structures.

7
New cards

Copolymer

A polymer constructed from two or more distinct types of monomer repeat units, combined to synthesize a hybrid material with composite-like properties.

8
New cards

Alternating Copolymer

A copolymer consisting of an ordered, alternating sequence of two distinct monomer units along the chain backbone.

9
New cards

Random Copolymer

A copolymer in which distinct monomer units are dispersed in an irregular, statistical sequence along the polymer chain (such as poly(styrene-co-acrylonitrile)).

10
New cards

Block Copolymer

A copolymer configuration where long contiguous sequences or blocks of one monomer species are covalently linked to long sequences of another monomer species.

11
New cards

Graft Copolymer (Branched Copolymer)

A copolymer structure consisting of a homopolymer main chain onto which side chains of a different polymer unit are covalently branched.

12
New cards

Acrylonitrile Butadiene Styrene (ABS)

A rubber-toughened thermoplastic polymer blend consisting of rubbery polybutadiene particles dispersed within a rigid, thermally stable styrene-acrylonitrile (SAN) copolymer matrix.

13
New cards

Polymer Cross-Linking

The covalent or ionic linking of adjacent polymer chains using catalysts (vulcanization, photo-curing) or multifunctional network formers (3+3+ bonds), enhancing strength and rigidity over secondary bonding.

14
New cards

Viscoelasticity

A time-dependent mechanical response exhibited by polymers under load, showing both viscous (liquid-like) flow and elastic (solid-like) deformation due to multiple modes of chain motion.

15
New cards

Deborah Number (DeDe)

A dimensionless number defined as De=time of relaxationtime of observationDe = \frac{\text{time of relaxation}}{\text{time of observation}}; materials that relax faster exhibit lower values, approaching 00 for liquids (e.g., water at 10−1210^{-12}) and ∞\infty for solids.

16
New cards

Creep

A viscoelastic phenomenon in which a polymer experiences a continuous increase in strain (ε(t)\varepsilon(t)) over time under a constant applied stress (σ0\sigma_0).

17
New cards

Stress Relaxation

A viscoelastic behavior characterized by a time-dependent decrease in internal stress (σ(t)\sigma(t)) while the polymer is subjected to a constant applied strain (ε0\varepsilon_0).

18
New cards

Glass Transition Temperature (TgT_g)

The temperature boundary below which a polymer becomes rigid and brittle due to insufficient thermal energy for chain segments to slide, and above which it transitions to a rubbery state.

19
New cards

Challenger Disaster (O-Ring Failure)

A historic engineering failure where rubber O-rings cooled below their TgT_g on launch day, causing them to lose elasticity and fail to seal, demonstrated before Congress by Richard Feynman.

20
New cards

Thermoplastic

A polymer class featuring linear or branched structures that reversibly softens or melts upon heating and hardens upon cooling, allowing easy recycling and broad processing options (e.g., PET, PVC, PE).

21
New cards

Thermoset (Thermosetting Polymer)

A heavily cross-linked or network polymer that permanently hardens during formation and decomposes rather than melting when reheated (e.g., epoxies and resins), making it difficult to recycle.

22
New cards

Hydrogel

A cross-linked network of hydrophilic, water-soluble polymers (such as PVA or PAM) that reversibly swells with substantial amounts of water rather than dissolving into solution.

23
New cards

Semiconducting Polymers

Polymers with alternating conjugated double bonds or aromatic cycles along their backbone enabling electrical charge transport, utilized in flexible electronics and biological interfaces.

24
New cards

Hierarchical Structure (Natural Polymers)

A multi-scale structural organization observed in biological polymers like keratin, progressing from α\alpha-helix chains to dimers, protofilaments, protofibrils, intermediate filaments, fibrils, and cortex.

25
New cards

Extrusion

A continuous manufacturing process for thermoplastics where plastic pellets are melted in a heated barrel and pushed through a shaping die via a turning screw to create profiles, pipes, and sheets.

26
New cards

Injection Molding

A discrete, one-at-a-time thermoplastic processing method where molten plastic pellets are rammed through a nozzle into a cold mold cavity under pressure to produce intricate, precise geometries.

27
New cards

Thermoforming

A polymer forming technique where a flat thermoplastic sheet is heated until pliable, stretched over a positive mould, and drawn tight against the tool surfaces using vacuum pressure.

28
New cards

Compression Molding

A molding process suitable for thermosets where polymer pellets or pre-shaped sheets are positioned inside an open, heated mold cavity and squeezed into shape under mechanical pressure.

29
New cards

Fused Deposition Modeling (FDM)

An extrusion-based additive manufacturing (3D printing) technique that heats thermoplastic filament just past its melting point and deposits it layer-by-layer to construct an object.

30
New cards

Stereolithography (SLA)

A vat photopolymerization 3D printing process where a UV laser cures liquid thermoset resin layer-by-layer, followed by post-print UV light exposure to complete cross-linking.

31
New cards

Resin Identification Code 1

Designates Poly(ethylene terephthalate) (PET), a common thermoplastic polyester used in single-use beverage containers and water bottles.

32
New cards

Resin Identification Code 2

Designates High-Density Polyethylene (HDPE), an unbranched or minimally branched thermoplastic widely utilized in opaque milk jugs and detergent bottles.

33
New cards

Resin Identification Code 3

Designates Poly(vinyl chloride) (PVC), a chlorinated thermoplastic widely manufactured into rigid plumbing pipes and structural conduit.

34
New cards

Resin Identification Code 4

Designates Low-Density Polyethylene (LDPE), a branched thermoplastic known for its flexibility and commonly processed into grocery shopping bags and films.

35
New cards

Resin Identification Code 5

Designates Polypropylene (PP), a thermoplastic characterized by good chemical and fatigue resistance, frequently used in food containers and living hinges such as flip-top caps.

36
New cards

Resin Identification Code 6

Designates Polystyrene (PS), an aromatic thermoplastic produced in solid and expanded foam varieties, notably used in disposable clamshell food containers.

37
New cards

Microplastics

Synthetic polymer fragments less than 5 mm5\,\text{mm} in diameter that persist in ecosystems, found globally in oceans, drinking water, and rain, and take decades to degrade.