1/15
Looks like no tags are added yet.
How do you quote percentage uncertainty?
same dp
Same standard form
Same units
What is the vertical component of velocity when an object is at max height
0 ms^-1
What is the initial vertical component of velocity when on object is projected horizontally?
0
When is a body in equilibrium
When the resultant force is 0 and the resultant moment is 0
How to solve an equilibrium problem
draw a force diagram showing all. Forces
Place the pivot
Enter the PERPENDICULAR distances between pivots
Take moments about the pivots and use principals of moments to determine the unknown forces
What is a moment
The force multiplied by the perpendicular distance from the pivot
What does uniform mass mean ?
Hat the center of gravity is in the center of the objcetv
What is the center of gravity/mass
The point where the weight is perceived to act
What is a couple
A pair of equal and parallel but opposite forces which tend to produce rotation only
What is a torque of a couple ?
One of The force multiplied by the perpendicular distance between forces
How to find the center of gravity of an object ?
suspend object from a point and allow it to hang freely
Draw a vertical line from the point of suspension using a plumbline
Repeat from at least one point of suspension
Where the lines intersect is the center of gravity
What are the four factors that affect the magnitude of drag force ?
Velocity of the object
cross sectional area
shape ( how streamline the object is )
how rough or smooth the object us
Explain the motion of the skydiver in terms of forces and acceleration. ?
resultant force his weight which is vertically down, the acceleration is 9.81 and the velocity is 0
the resultant force is weight-drag and the resultant force has decreased, acceleration is less than 9.81 and velocity is greater than 0
the skydiver has reached terminal velocity and the resultant force his 0 the acceleration is 0
the weight is the same but the upwards drag force has increasedm the object is experiencing ACCELERATUON OPPOSITE TO THE DIRECTION OF MOTION
the skydiver has reached a lower terminal velocirft and the resultant force and acceleration are now zero
Set up an experiment to measure the terminal velocity of a ball ?
set up equipment as shown with a ball bearing and a cylinder of liquid
drip the ball bearing into the liquid and at fixed intervals of time( measured with a stopwatch) mark the position of. the ball
repeat several times ensuring the markers are in the correct position
calculate the velocity of the ball in each section using velocity is distance / time
if the velocity becomes constant then the ball has reached the terminal velocity
How would the magnitude of acceleration change if the ball was going down a rough slope compared to a smooth slope?
The magnitude would decrease as friction opposes the direction of motion, reducing the resultant force down the slope and reducing the magnitude of acceleration
Why does a leaf reach a terminal velocity ?