1/50
Looks like no tags are added yet.
Overall goal of tooth preparation
Keep preparation as conservative as possible to maintain biological, mechanical, and esthetic balance.
Three general principles of tooth preparation
Biological considerations, mechanical considerations, and esthetic considerations—all required for treatment success.
Three biological considerations in tooth preparation
Prevention of damage during preparation, conservation of tooth structure, and considerations affecting future dental health.
Three structures to protect from damage during tooth preparation
Adjacent teeth, soft tissues, and dental pulp.
Preventing iatrogenic damage to adjacent teeth
Common injury during prep; protect adjacent surfaces (e.g., with a metal matrix band) while preparing the interproximal surface of the treated tooth.
Preventing soft tissue damage during tooth preparation
Use a mirror, retractors, and a saliva ejector.
Causes of pulpal degeneration and age factor
Pulpal degeneration can appear years later due to extreme temperatures,chemical irritation, or microorganisms; pulp size decreases with age (assess via radiographs).
Thermal pulpal damage during preparation
Friction between rotary instruments and tooth structure generates heat due to excessive pressure, high rotational speed, and instrument type, shape, or condition.
Chemical pulpal irritation and liners/varnishes/adhesives
Avoid irritating materials during prep; varnishes and adhesives form a barrier but can complicate cementation.
Bacterial pulpal damage and dentin resistance
Bacteria under restorations or from microleakage cause pulpal damage; remove all carious dentin, noting vital dentin is more resistant to infection.
Conservation of tooth structure and remaining dentin thickness
Preserve as much tooth structure as possible while meeting mechanical and esthetic needs; remaining dentin thickness is inversely proportional to pulpal response (extra care needed on vital teeth).
Six guidelines to conserve tooth structure
Use partial-coverage instead of full-coverage restorations, minimize axial wall convergence angle, follow anatomical planes on occlusal surfaces, preserve tissue near pulp axially, use conservative margin geometry, and avoid unnecessary apical extension.
Six considerations affecting future dental health
Axial reduction, margin placement, marginal adaptation, margin geometry, occlusal considerations, and avoidance of tooth fracture.
Axial reduction and contour requirements
Over-contoured axial walls cause gingival inflammation; prep must allow proper axial contours/profiles (increased proximal contour in anterior teeth aids papilla; sufficient posterior reduction prevents periodontal issues).
Minimum occlusal clearance spaces
Functional cusps: 1.5 mm; non-functional cusps: 1 mm; marginal ridges and fossae:1 mm.
Supragingival margin placement and its advantages
Place margins supragingivally whenever possible for better hygiene,location on enamel, less soft-tissue trauma, easier impressions, and better visibility during cementation and follow-up.
When subgingival margins are justified (despite higher periodontal risk on dentin/cementum)
Caries, cervical erosion, or subgingival restorations; proximal contact extending to gingival crest; extra retention/resistance needed; concealing metal-ceramic crown margins; uncontrollable root sensitivity; blocking removable prosthesis clasp retention areas.
Marginal adaptation principles
Tooth–restoration junction is prone to leakage; better marginal adaptation yields better long-term prognosis, aided by a smooth margin.
Four guidelines for margin geometry
No overextension or unsupported enamel, easy identification in impressions,sufficient material thickness, and preservation of tooth structure.
Knife-edge finish line
Conservative of tooth structure, but lacks sufficient material thickness—not recommended.
Cinched/feather-edge finish line
Conservative of tooth structure, but margin location is hard to control; used occasionally on inclined teeth.
Bevel finish line
Eliminates unsupported enamel and allows a metal finish, but risks extending into the sulcus if placed over apical margins; used on facial margins of maxillary partial-coverage restorations and inlay/onlay margins.
Chamfer finish line
Clear margin, adequate bulk, and easy to control (watch for unsupported enamel tongue); used for cast metal restorations and lingual margins of metal crowns.
Shoulder finish line
Provides restorative material bulk but is less conservative of tooth structure; used for facial margins of porcelain-fused-to-metal (PFM) or all-ceramic crowns.
Sloped shoulder and beveled shoulder finish lines
Less conservative (beveled shoulder extends apically): sloped shoulder combines material bulk with bevel advantages (facial margin of PFM crowns); beveled shoulder adds bulk and bevel benefits for posterior PFM crowns with supragingival margins.
Occlusal considerations and dental malposition
Prep must leave space for a functional occlusal scheme; malpositioned teeth need careful evaluation (diagnostic wax-up), may risk retention/resistance if over-reduced, and may require endodontic care.
Avoiding tooth fracture
Trauma or parafunctional habits (e.g., bruxism) can fracture teeth; prevent by covering weakened cusps with onlays or full-coverage crowns.
Three mechanical considerations in tooth preparation
Provide retention form (prevent decementation), provide resistance form (prevent fractures), and prevent deformation of the restoration.
Retention form
Quality of a preparation preventing dislodgement along the path of insertion from masticatory forces.
Dislodging forces and decementation causes
Dislodging forces along path of insertion are small compared with seating forces; sticky foods are the main cause of decementation, and flossing under connectors can contribute.
Geometric factors governing retention
Retention relies more on preparation geometry than adhesion (most cements are non-adhesive; cement particles block sliding); more parallel opposing walls, single path of insertion, smaller diameter on short teeth, longer walls, and grooves increase retention.
Roughness of the restoration's fitting surface
Very smooth internal surfaces risk failure at the cement–restoration interface; acid etching the fitting surface can help, while tooth surfaces are usually not roughened to avoid impression/accuracy issues.
Cemented materials and luting agent retention/film thickness
Casting alloy and axial core materials affect retention; adhesive resin cements are most retentive, while increased cement film thickness lacks clear evidence on retention.
Resistance form
Prepares tooth areas under compression ("resistance areas") to prevent horizontal/oblique/lateral forces from rotating the restoration around the gingival margin.
Magnitude and direction of dislodging forces
Normal occlusion distributes forces well to restoration materials, whereas parafunctional or abnormal habits create heavy oblique forces alongside axial forces that preps must resist.
Preparation geometry and resistance to displacement
Resistance relates to axial wall convergence, diameter, and height,with a practically linear relationship between height or diameter and resistance to displacement.
Physical properties of luting agents
Affect resistance to deformation, compressive strength, and elastic modulus (influenced by temperature); zinc phosphate and polycarboxylate have similar compressive strength, while glass ionomer and resin cements have higher compressive strength.
Prevention of deformation and failure sites
Restoration failure typically happens at the restoration–cement or metal–ceramic interface due to poor alloy choice, faulty tooth prep, or improper metal–ceramic framework design.
Alloy selection for strength and rigidity
Type III and Type IV gold alloys are hard/resistant; high-noble metal–ceramic alloys match Type IV gold hardness; harder chromium–nickel (Cr-Ni) alloys suit high-force cases.
Adequate tooth reduction and clearance
Clearance is the space for restorative material (1.5 mm min over functional cusps, 1 mm over non-functional cusps); following tooth anatomy provides rigidity while conserving tooth structure.
Finish line placement relative to occlusal contacts
Avoid placing margins on occlusal contact points; position finish lines 1–1.5 mm away from occlusal contact areas.
Path of insertion
Imaginary line along which a restoration seats or removes, visualized beforehand in mesiodistal and buccolingual orientations (parallel to tooth long axis for a metal-ceramic crown).
Esthetic considerations in treatment planning
Balance patient esthetic desires with longevity and durability through comprehensive evaluation; all-ceramic restorations offer the highest esthetics.
All-ceramic restorations
Most esthetic option with higher fracture risk (though physical properties have improved markedly) and requires 1–1.5 mm minimum material thickness.
Metal-ceramic restorations
Less natural esthetics can stem from thin ceramic, overcontouring/periodontal issues when bulk is forced, or poorly positioned facial margins.
Five steps of tooth preparation
Occlusal reduction, facial reduction, incisal reduction, proximal reduction, and placement of the facial margin.
Occlusal reduction by material
Gold: 1.5 mm functional cusps, 1.0 mm non-functional cusps; metal–ceramic: 1.5–2.0 mm functional cusps, 1.0–1.5 mm non-functional cusps; all-ceramic: 2.0 mm.
Functional cusp bevel and marginal bevels
Functional cusp bevel prevents thin castings and excessive cusp inclination; marginal bevels remove irregular finish edges and improve retention/stability but are technically harder to make.
Facial, incisal, and proximal reduction
Facial: min 1.5 mm (two planes on anterior facial surfaces). Incisal: 2.0 mm (no metal substructure, aiding metal–ceramic esthetics; avoid over-reduction). Proximal: metal 0.3–0.5 mm, all-ceramic 1.0–1.2 mm, metal–ceramic 1.0–1.5 mm.
Placement of the facial margin and biologic width rule
Supragingival preferred; subgingival used for facial metal collars or high smile lines (thin gingiva may still show metal). Follow free gingival contour; staying within 1.5 mm of alveolar crest risks bone resorption.
Partial-coverage restorations and margin rules
Conservative bonded restorations (e.g., occlusal/cusp coverage) considered before full crowns; mesial proximal margins are critical esthetically; maxillary facial often beveled,mandibular facial often chamfered (functional cusps), with supragingival enamel margins preferred when smooth and well-adapted.