1/21
Comprehensive vocabulary flashcards reviewing key concepts, regulatory requirements, electrical circuits, materials, and physics from the FAA Aviation Mechanic practice exam.
SHEL Model
A human factors framework used in aviation maintenance to determine both what a problem is and the underlying systemic factors and interactions contributing to it.
Series Inductance
The total inductance of inductors connected in series when their magnetic fields do not affect each other, calculated as L(T)=L(1)+L(2)+L(3)…
High-Pressure Hydraulic Tubing
Rigid metal tubing possessing high strength and abrasion resistance, required for 3,000PSI hydraulic systems operating aircraft landing gear and flaps.
Arm (Weight and Balance)
In weight and balance theory, the horizontal distance extending from the reference datum or fulcrum to the center of gravity of an object or weighing point.
Dye Penetrant Inspection
A nondestructive inspection method used to reveal surface flaws such as minute cracks, where indication clarity relies directly on sufficient penetrant dwell time and proper surface cleaning.
Parallel Circuit Voltage
The electrical principle stating that the voltage drop across each branch in a parallel circuit (such as VR3 across four 6Ω resistors powered by a 24V battery) equals the total source voltage (24V).
Fayed Surfaces
Surfaces placed in direct contact with one another that present a hazard during chemical cleaning due to the danger of trapping corrosive cleaning solutions between them.
Teflon Hose In-Service Set
A permanent set or shape assumed by a Teflon hose after operating in service under heat and pressure, requiring careful handling and precautions when temporarily removed.
Tubing Bends (Fluid and Pneumatic)
Smooth bends engineered into fluid and pneumatic metal tubing runs primarily to absorb vibration, accommodate thermal expansion and contraction, and prevent physical stress.
Diode (Power Supply Circuit)
A semiconductor device used in electrical power supply circuits primarily to convert alternating current into direct current by permitting current flow in only one direction.
100-Hour Inspection Checklist
A standardized inspection checklist mandated by Federal Aviation Regulations for aircraft operated for hire, requiring at least the items set forth in the regulatory appendix.
Torque
The rotational force produced by applying a load perpendicular to a lever arm, calculated by multiplying force by distance (e.g., 80lbs applied perpendicular to a 1.5ft handle yields 120ft-lbs).
Piston Displacement
The total volume swept by an engine's pistons during a single stroke, calculated from cylinder bore (e.g., 3.5in), stroke length (e.g., 4.5in), and the number of cylinders (e.g., 6 cylinders).
Dimension Tolerance
The permissible limits of variation from a basic dimension specified on a blueprint, such as 4.387inches+0.005−0.002.
Basic Dimension
The exact numerical value given on engineering drawings that specifies the ideal or 'perfect' size of a part before manufacturing tolerances are applied.
Tetraethyl Lead (TEL)
A chemical compound added to aviation gasoline to enhance octane rating, suppress detonation, and improve antiknock characteristics.
Absolute Humidity
The actual mass or amount of water vapor present in a given unit volume of air.
Gas Pressure (Doubled Volume and Temperature)
According to the ideal gas law (P=VnRT), if both the volume and absolute temperature of a confined gas are doubled simultaneously, the resulting pressure will remain unchanged.
Weathervaning
The tendency of an aircraft to rotate into the relative wind while taxiing or maneuvering on the ground.
Annealing (Steel)
A heat-treatment process where steel is heated to a high temperature and cooled slowly to relieve internal stresses, soften the material, and increase ductility.
Cotter Pins (Compass Proximity)
Fasteners fabricated from nonmagnetic materials required when installed in close proximity to a magnetic compass to prevent directional deviation.
Total Time in Service (Part 91)
The total elapsed operating time of an aircraft that must be entered into maintenance records upon completion of required inspections or maintenance under 14 CFR Part 91.