1/69
Looks like no tags are added yet.
What is the physical mechanism of heat transfer defined as direct molecular contact between a warmer object and a cooler object?
Conduction
Which common physical thermal agents transfer heat primarily via conduction?
Hot packs, cold packs, paraffin bath, and ice massage.
How is heat transferred via convection?
By the movement of circulating air or fluid across a body surface from a warmer area to a cooler area.
Which thermal therapeutic modalities rely on convection for heat transfer?
Whirlpool and fluidotherapy
What is the physical mechanism of heat transfer through conversion?
Generation of thermal energy from non-thermal energy forms (mechanical, electrical, or chemical energy).
Which deep heating modalities utilize conversion to increase tissue temperature?
Shortwave diathermy (SWD) and therapeutic ultrasound (US).
How is heat transferred through radiation?
Direct heat transfer from a warmer object to a cooler object through electromagnetic energy transmission (e.g., an infrared lamp).
How does evaporation produce cooling in cryotherapy?
A liquid absorbs heat from the skin surface as it rapidly changes into gas upon contact (e.g., vapocoolant spray).
During superficial thermotherapy, which tissue layer undergoes the fastest and greatest temperature rise?
Skin surface
During superficial thermotherapy, which tissue layer undergoes slower and less rapid temperature rise?
Subcutaneous tissue
Why does blood flow to internal organs decrease during localized superficial heat application?
Local vasodilation draws blood flow toward the heated skin and peripheral tissue, shunting blood away from internal organs.
How many layers of toweling are required between a hot pack and the patient's skin?
6 to 8 layers of toweling (a standard commercial hot pack cover equals 2 to 4 towel layers).
What is the standard water temperature range for storing hot packs in a hydrocollator unit?
158°F to 167°F
At what point during a hot pack application does tissue temperature peak, requiring a physical check for skin burn risks?
Within the first 5 minutes of application.
What is the typical total treatment time for a hot pack application?
20 to 30 minutes
Which modalities are required to heat deep anatomical structures located deeper than 3 cm?
Continuous ultrasound (US) or shortwave diathermy (SWD).
What is the therapeutic operating temperature range of a paraffin bath?
125°F to 127°F
What is the standard ratio of paraffin wax to mineral oil used in paraffin bath therapy?
6:1 or 7:1 ratio of paraffin wax to mineral oil.
What is the treatment time for the paraffin bath
15-20 minutes
For which body parts and clinical conditions is paraffin treatment most commonly indicated?
Distal, small, or irregular joints (hands, feet) in late-stage arthritis or chronic inflammatory conditions.
What are the recommended water temperatures and immersion times for a contrast bath?
Warm water: 100°F to 111°F for 4 minutes
Cold water: 55°F to 65°F for 1 minute
What is the sequence protocol regarding water temperature when initiating and completing a contrast bath session?
Always start and end the contrast bath sequence in warm water.
What is the standard total treatment duration for contrast bath therapy?
25 to 30 minutes (repeating the 4-min warm / 1-min cold cycle 5 to 6 times).
What physiological effects are expected to increase with general heat application
Cardiac output, Metabolic rate, Pulse rate, Respiratory rate, Vasodilation
What physiological effects are expected to decrease with general heat application
Blood pressure, Muscle activity (sedentary effect), Blood to internal organs, Blood flow to resting muscle, Stroke volume
What are the temperature ranges for tepid, neutral, and thermal hydrotherapy (whirlpool) applications?
Tepid: 79°F to 92°F
Neutral: 92°F to 96°F
Thermal: 99°F to 104°F
What safety feature is mandatory for all hydrotherapy whirlpool units to prevent electrical shock?
A Ground-Fault Circuit Interrupter (GFCI).
What are indicators for the use of superficial thermotherapy
Chronic conditions
To decrease stiffness and/or spasms, modulate pain, increase ROM, accelerate tissue healing
What general rule governs the clinical decision to apply passive physical agents?
Do not use passive physical agents unless necessary to facilitate patient participation in an active treatment program.
What are the primary absolute contraindications for superficial thermotherapy?
Acute musculoskeletal trauma, active bleeding/hemorrhage, thrombophlebitis, impaired sensation or mentation, malignant tumors, and infrared irradiation of the eyes.
What are precautions for superficial thermotherapy
Pregnancy, Impaired circulation, Poor thermoregulation, Edema, Cardiac insufficiency, Demyelinated nerves, Metal in the area, Over an open wound, Over areas where topical counterirritant have been applied
What clinical mnemonic represents the predictable progression of sensory stages experienced during cold application?
"CBAAN" = Cold, Burning, Aching, Analgesia, Numbness.
What is the tissue layer order for temperature change severity during cryotherapy?
Greatest change occurs in the skin, followed by subcutaneous tissue, and finally deep joints and muscles.
What is the Hunting response in cryotherapy?
Cold-induced vasodilation occurring after more than 15 minutes of cold exposure, characterized by alternating vasoconstriction and vasodilation (commonly in hands, feet, and face).
What physiological values increase during general cold application
Blood flow to internal organs, Cardiac output, Stroke volume, Arterial blood pressure
What physiological values decrease during general cold application?
Metabolic rate, pulse rate, respiratory rate, and venous blood pressure.
What temperature are gel-filled cold packs stored at in specialized cooling units? What is the treatment time?
23°F; 10-20 minutes
What types of cold modalities transfer energy through conduction
Cold packs, Ice packs and Ice massage
How should a gel cold pack be applied to skin to ensure effective conduction?
Dampen a towel with warm water and place the cold pack over the towel onto the skin.
What is the maximum target area size and duration for an ice massage application?
Maximum area of 4 X 6 in2 (10 X 15 cm2) for 5 to 10 minutes (or until analgesia occurs)
What distance and angle should be maintained when applying vapocoolant spray during spray-and-stretch techniques? How long should treatment time be?
Hold spray 12 to 18 inches (30.5-46 cm) away from the skin at a 30° angle; 10-15 minutes
What muscle state should be maintained before and during vapocoolant spray application?
The muscle should be placed on a passive stretch.
What is the operating water temperature range for cold hydrotherapy (whirlpool)?
32°F to 79°F for up to 20 minutes.
What modes of heat transfer are utilized by cold compression units operated at 50°F to 59°F?
Conduction and convection
Why is cryotherapy preferred over thermotherapy when treating an area near a malignant tumor?
Thermotherapy increases local metabolic rate and blood flow (risking tumor proliferation), whereas cryotherapy slows metabolic rate.
What are the indications for cold therapy application
Acute conditions
To modulate pain, decrease swelling, reduce muscle spasm or spasticity, reduce soreness postexercise
What are the primary contraindications for cold therapy application?
Cold intolerance/hypersensitivity (cold urticaria), cryoglobulinemia, paroxysmal cold hemoglobinuria, infection, Raynaud phenomenon, compromised circulation/PVD, and regenerating nerves.
What are the precautions for cold therapy application
HTN, poor sensation or mentation, Very young or very old patients, Over the main branch of a superficial nerve, Over an open wound
When referring to ultrasound, what is intensity
Intensity is the amount of current delivered per unit area
What causes hot spots (peak spatial intensity) during ultrasound administration?
Uneven intensity delivery causing non-uniform distribution of ultrasound energy over the surface area of the transducer head.
What defines the spatial average intensity in ultrasound therapy?
The total acoustic power (watts) divided by the effective radiating area (cm2) of the transducer head (W/cm2).
What depth of penetration and typical intensity range are associated with 1 MHz therapeutic ultrasound?
Deep penetration (3 to 5 cm deep) at an intensity of 1.5-2.0 W/cm2
What depth of penetration and typical intensity range are associated with 3 MHz therapeutic ultrasound?
Superficial penetration (1 to 2 cm deep) at an intensity of 0.5-1.0 W/cm2
What is the formula for calculating ultrasound duty cycle?
Duty cycle = time on/(time on + time off)
If pulsed ultrasound is set to 2 ms ON and 8 ms OFF, what is the resulting duty cycle?
20% duty cycle, which is the most common setting for non-thermal ultrasound.
What duty cycle cutoff distinguishes pulsed ultrasound from continuous ultrasound?
Pulsed US has a duty cycle of ≤50% (non-thermal effects), whereas Continuous US has a duty cycle of 100% (thermal effects).
What non-thermal ultrasound mechanism involves the formation and pulsation of micro-bubbles in tissue fluids?
Cavitation (stable cavitation causes no damage; unstable cavitation causes tissue damage).
What non-thermal ultrasound phenomenon is defined as the unidirectional movement of fluids along cell membranes?
Acoustic streaming
What condition causes a patient to feel a strong, sudden deep ache during continuous ultrasound, and how is it managed?
Periosteal pain caused by overheating of the periosteum; manage immediately by reducing intensity or expanding the treatment surface area.
What does attenuation mean when talking about ultrasound
Decrease in intensity as US travels through soft tissue
In which body tissues is ultrasound energy attenuation via absorption highest?
Tissues rich in collagen and protein (muscles, tendons, ligaments, and joint capsules).
What is the recommended size ratio of the ultrasound transducer head (ERA) relative to the target treatment area?
The sound head ERA should be approximately half the size of the treatment area (treatment area should not exceed 2 to 3 times the ERA).
What general rule determines treatment duration when using direct-contact ultrasound over an area twice the ERA size?
5 minutes of treatment time for an area that is twice the ERA size.
What would you expect to use a transducer head set to a low intensity for
Acute conditions or superficial structures
What would you expect to use a transducer head set to a high intensity for
Chronic conditions or deeper structures
How should indirect (water immersion) ultrasound be performed relative to distance, angle, and container type?
Use a plastic container; keep the sound head 1 cm away from the skin surface and positioned at a 90° right angle.
How does heating efficiency compare between indirect (water immersion) and direct contact ultrasound techniques?
Indirect water immersion produces significantly less tissue heating than direct contact application.
What are indications for ultrasound use
Increase connective tissue extensibility, Decrease pain, Reduce inflammation, Accelerate tissue healing, Reduce muscle spasm
What are strict contraindications for ultrasound application?
Infection, Malignancy, Compromised circulation, Thrombophlebitis, Over eyes, reproductive organs, CNS tissue, Pacemakers, Pregnant (avoid pelvic/lumbar/abdominal regions), or Over cement, plastic, or polyethylene implants
What key precautions must be monitored prior to ultrasound application?
Acute inflammation, epiphyseal plates (in growing children), active fractures (Fxs), and breast implants.