1/7
i love you huy
give a summary of why crystallition is used and and overview of how it works
dissolve impure solid in high temperature solvent
solution cools and the solid recrystallizes (hopefully with high purity)
mother liquor contains impurities that are filtered out of the crystals
how much solvent should you use to dissolve your solid in recrystallization? how else should the solvent be (inrelation to the solid)?
as little as possible, and hot but not enough to fully evaporate the solvent and end up liquifying the solid in the high temperature
solvent needs to have a low boiling point (ipro very good), and especially lower than the extracted solid. if the solid is polar, it needs a polar solvent, and something like hexane for the opposite
explain how crystallization differs from precipitation
crystallization
slow and selective formation of lattice structure that doesnt trap impurities in the crystal
precipitation
rapid formation of a weird amalgamate structure that includes impurities
what is the property that recrystallization relies on? give an analogy
solubility increases as solvent temperature increases
(hot water will dissolve sugar quicker than room temp water, and sugar will crystallize selectively if you slowly cool the solution)
how do you calculate the gas chromatography curve area
height * width at half heigh of peak
describe the steps of clove distillation
put ground cloves and water in high heat
they will vaporize before either’s boiling point due to dalton’s rule of partial pressures (which is good because we dont want to burn the cloves)
cooling chamber makes them liquid whitish
they can be seperated out with a nonpolar solvent and funnel (its a combination of oil and water)
anhydrous salts can be added to further dry the oil
solvent is heated off
if you were to run a clove oil TLC plate, what would you see and why?
you would see eugenol and eugenol acetate;
less eugenol acetate because there is just less of it in cloves
eugenol is more polar so it would be lower than eugenol acetate
what is the type of sn2 reaction we did in the last lab and what was the reaction equation?
Finkelstein Reaction
RX + NaI —> RI + NaX (X = Cl or Br)