1/274
Looks like no tags are added yet.
What does nondestructive evaluation assume?
1) all materials posses flaws 2) flaws in an object do not necessarily render it unfit for service 3) The ability to detect flaws increases with flaw size
What happened to the seaplane that crashed?
It had cracks that caused metal fatigue
What was visible on the chalks ocean airways Grumman mallard?
There were two offset drilled holes. There was fatigue present
What are the two types of Non-destructive evaluation techniques?
Active and passive
Where can flaws be?
surface, near surface, or volumetric
What does active techniques mean?
Introduce energy and observe how it changes in the presence of flaws
What are examples of volumetric active tecniques?
radiography and ultrasonics
What are examples of surface and near surface active techniques?
Magnetics and eddy current
What does passive technique mean?
monitor or observe the object of interest in the "as is" state (may including loadings) or with visually enhancing fluids
What is an example of a volumetric passive technique?
Acoustic emission
What is an example of a surface passive technique?
Liquid penetrant
What are other examples of passive techniques?
Visual examination, noise analysis, and leak testing
What words are interchangeable?
Nondestructive testing, Nondestructive Inspection, and Nondestructive evaluation
What is visual inspection used for?
examine cracks, corrosion, dents, deformations
What is the first NDE step?
visual inspection
What do we use if damage escapes vision?
Borescopes, endoscopes, microscopes, binoculars, telescopes
What is a borescope?
It has an objective lens or video camera on one end, an eyepiece or video display on the other, connected by a rigid or flexible tube. Some can sense infrared
What are tools good for in visual inspection?
Inspecting aircraft frames, building utilities, diesel engines, and others. Allow hard areas to be seen.
Why is thermography used?
The visible spectrum is limited to a very small band of the electromagnetic spectrum, and Humans are blind to most electromagnetic activity around them
What is thermography?
A type of imaging where cameras are used to detect and measure infrared radiation that cannot be seen with the naked eye
What does thermography allow?
Because the amount and intensity of infrared radiation emitted depends upon temperature, thermography allows visualization of temperature differences. For example, hot or warm objects stand out well against cooler backgrounds
What do imagining cameras use?
Most imaging cameras use focal plane array detectors made from infrared sensitive materials (e.g., InSb, InGaAs, and HgCdTe).
What does the thermal camera do to the image?
They convert the infrared energy to a visible image which can then be observed on a display (e.g., CRT, LCD, LED, etc.)
How are x-rays produced?
When highly accelerated electrons strike a suitable target, x-rays are produced
What is it called when radiation s excited by highly accelerated electrons?
bremsstrahlung
Who observed x-rays?
Wilhelm Röntgen; he noticed that the ring on his wife's finger appeared different
How does intensity affect an X-ray?
When x-rays of intensity pass through an object of thickness x , they are attenuated to greater or lesser amounts (e.g., lead attenuates more than bone which attenuates more than muscle)
What does the linear attenuation coefficient depend on?
The linear attenuation coefficient varies depending upon incident frequency so one must consider x-ray energy when finding the appropriate attenuation coefficient.
Do all objects have the same attenuation?
No. Differing objects/materials placed in the path of an x-ray beam yield differing amounts of attenuation (contrast) which can be recorded by a detector or photographic plate
What is an improved version of x-ray?
computed tomography (CT), which was invented in the 1970's
What is a CT?
A thin beam of collimated x-rays rotate about an object as detectors sense the information. 2D and 3D visualizations are then constructed using computers
What does penetrant inspection rely upon?
capillary forces and the natural accumulation of fluids around discontinuities such as cracks
What is a complete system for liquid penetrant?
A complete system consists of a fluid that concentrates itself near/in discontinuities along with a method to detect it
What kind of materials are added to liquid penetrant?
particles that fluoresce (release light energy) are added to the fluid
What is used to detect the cracks with the liquid penetrant?
special lighting (e.g., ultraviolet) causes them to emit visible light for optical observation.
What is ZYGLO?
ZYGLO is an extremely sensitive fluorescent penetrant inspection method that reveals cracks and other surface discontinuities in virtually any non-porous material
What is the order of use for liquid penetrant?
Clean, apply penetrant, remove penetrant, develop, and inspect
What kind of waves exist in solids?
longitudinal and transverse (shear) waves
What kind of waves do fluids not support?
Shear stresses or shear waves
Do all waves propagate at the same speed?
No. Different wave types propagate at different speeds.
What kind of waves are considered one-dimensional?
Plane waves (propagation along rods)
What kind of waves are considered three-dimensional?
Bulk waves (propagation through infinite space
What other types of waves exist?
Rayleigh and Lamb waves, which propagate along the surface
What happens when a wave strikes a boundary?
some energy is transmitted and some is reflected
What occurs with oblique incidence waves?
There are more conversions a longitudinal wave changes into a shear wave and vice versa) and angularity changes at the boundaries
What law is used for reflection of waves?
Snell's law
What is Piezoelectricity?
Electricity or electric polarity due to pressure especially in a crystalline substance (as quartz)
What happens to a piezoelectric crystal if you apply an electric field to it?
It will change shape (contracts or expands depending on field polarity)
What are Piezoelectric Transducers specified with?
a nominal resonance frequency (e.g., 5MHz) although actual generated frequencies can extend well above and below
What happens went using pulse-echo inspection?
When an ultrasonic packet of energy (e.g., pulse) strikes a surface or anomaly such as a crack, it will be reflected much like radar, sonar, or visible light
What is the process for using a pulser/transducer?
Transducer emits a single sharp pulse, goes into receiving mode, and waits. The wave strikes surfaces or anomalies and is reflected back. Multiple reflected pulses of diminishing strength (ring-down)excite the transducer and are recorded as echo's. This process then repeats.
What affects the magnitude of reflection?
Flaw size, orientation, etc. Energy is lost with each reflection so multiple echoes (ring-down) have diminishing strength
What are the trends in X-rays for different attenuations?
Pores, cracks and less attenuative materials allow more x-ray energy to pass through, expose the film more, and get recorded as ark regions (with humans, soft tissue appears dark while bones appear light)
When is more energy transmitted when a wave strikes a boundary?
when the acoustic impedances closely match
What is oscillatory motion?
A body having an equilibrium position that when displaced, experiences a restoring force causing back-and-forth motion about its equilibrium position
What are examples of oscillatory motion?
engine pistons, musical instrument strings, or a simple pendulum
What is a classic mathematical example of oscillatory motion?
horizontal spring-damper mass system
What law is used for the horizontal spring-damper mass system
Newtons second law
What forces are present in the horizontal spring-damper mass system?
Spring force (elastic), damping force (viscous)
What equation has significant importance in the study of periodic motion and vibrations?
A second-order, nonhomogeneous, linear differential equation
What is vibration?
A periodic motion of the particles of an elastic body or medium in alternately opposite directions from the position of equilibrium when that equilibrium has been disturbed (as when a stretched cord produces musical tones or molecules in the air transmit sounds to the ear)
What is period?
time to complete one cycle of vibration
What is natural frequency?
Cycle per time
if the damping coefficient is equal to 0...
there is free vibration
What does it mean for a system to be overdamped?
displaces, then moves toward equilibrium
What does it mean for a system to be critically damped?
displaces the most, but moves toward equilibrium the quickest
What does it mean for a system to be underdamped?
vibrates as it moves toward equilibrium
What are resonance frequencies?
frequencies close to free or damped natural frequencies
Can all objects resonate?
Yes, if disturbed the right way
Are large amplitude displacements possible?
Yes. They can be catastrophic
What helps avoid harmful external disturbances?
Knowing the resonance frequency
How do we test vibration?
Experimentation is likely needed since most real world geometries are much too complicated to be predicted/simulated with confidence
What objects resonate at higher frequencies?
As a general rule, light/stiff structures tend to resonate at higher frequencies than heavy/compliant ones (e.g., think of guitar strings)
Viscous Damping
Energy absorption through viscous drag with force proportional to velocity. Air, water, motor oil, etc.
Structural Damping
Structure dissipates energy as it vibrates. Moving connections, fasteners, joints, etc.
Hysteresis/Viscoelastic/Material
Loaded solids absorb energy through internal friction. Rubber bands, seat cushion foams, etc.
What is a strobe light?
A strobe light or stroboscopic lamp is a device used to produce regular flashes of brilliant light.
How many flashes per minute are possible with a strobe light?
Thousands of flashes per minute (fpm) are possible leading to many scientific, law enforcement, emergency, industrial, and entertainment applications.
What is the light source in the strobe light?
The light source is commonly a xenon flash lamp
What kind of light is produced with the strobe light?
White light, , with a color temperature of approximately 5,600 K
What does the strobe light consist of?
It consists of a sealed fused quartz tube filled with a mixture of gases (primarily xenon) and electrodes that carry current/charge to the gas.
What produces the flash?
a high voltage energy source (usually electric charge stored in a capacitor) is very quickly delivered to the gas upon triggering. As current travels through the tube, xenon electrons get excited, jump to higher energy levels, and immediately drop back; rapidly releasing photons (e.g., visible light)during the process
Who discovered the strobe light?
In the late 1920's as a graduate student at the Massachusetts Institute of Technology(MIT), Harold Eugene Edgerton began investigating stroboscopy
What is the strobe light used for?
photography as well as the study of moving objects
What does the strobe light do?
When used to study motion, the rapidly flashing lamp seemed to bring periodically moving objects to rest
What was the exposure time on a lot of Edgerton's lab photos?
1/10,000 of a second (
What is the flash energy on a strobe light?
strobes have flash energy in the range from 10 to 150 J or greater and discharge in as little as a few milliseconds or less (making them very bright!)
What is an experimentalist?
One who experiments; specifically: a person conducting scientific experiments.
What does it mean to tinker?
To work in the manner of a tinker; especially: to repair, adjust, or work with something in an unskilled or experimental manner.
What causes heat transfer?
A temperature difference
What is the medium for conduction?
solid or stationary fluid
What is the medium for convection?
moving fluid
What is radiation between?
Two surfaces
What does temperature quantify?
degree of hotness or coldness on a definite scale
What direction does heat flow?
Hot to cold
What is conduction?
The transfer of heat through matter by communication of kinetic energy from particle to particle with no net displacement of the particles.
What law is used for conduction?
Fourier's Law, which includes heat flux, thermal conductivity, and temperature gradient
What is convection?
Energy transfer due to random molecular (diffusion) and macroscopic motion of a fluid (natural or forced). Convection can be thought of as "conduction in motion"
What law is used for convection?
Newton's Law of cooling, which includes convection heat transfer coefficient, surface temperature, and fluid temperature
What is radiation?
Refers to the continual emission of energy (radiant energy in the form of electromagnetic waves) from the surface of all bodies