1/54
Flashcards covering bridge structural components, superstructure and substructure parts, material classifications, design systems, and structural behavior.
Bridge
A structure spanning physical obstacles such as a body of water, valley, or road to provide passage, typically constructed from concrete, steel, or wood.
Superstructure
The upper portion of a bridge that directly receives and supports traffic loads, consisting of girders, diaphragms, and the deck slab.
Substructure
The lower supporting components of a bridge below the superstructure that transfer loads to the ground, consisting of copings, piers, abutments, and foundations.
Deck Slab
The concrete surface layer of the superstructure that directly provides the roadway for vehicles or pedestrians.
Girder
A horizontal main supporting beam used in bridge construction to support the deck slab and carry longitudinal structural loads.
Interior Diaphragm
A transverse structural member placed between main girders within the superstructure to distribute loads horizontally and provide lateral rigidity.
Expansion Joint
A engineered gap in the bridge deck designed to safely accommodate expansion and contraction caused by thermal movement and concrete shrinkage.
Abutment
A substructure support structure located at the ends of a bridge that supports the superstructure spans and retains the adjacent roadway approach embankment.
Pier
An intermediate substructure support used in multi-span bridges to transfer loads from the superstructure down to the foundation.
Coping
The top capping layer or beam of a substructure element (such as a pier cap) designed to distribute load evenly onto columns or shafts.
Pedestal
A concrete pad or block constructed above the coping to support bearings and seat the bridge girders.
Shear Block
A structural concrete block provided on the substructure coping to restrict lateral displacement of the superstructure.
Footing
The widened base of a substructure foundation that directly transmits structural loads into the soil or rock foundation bed.
Flat Slab Bridge
A concrete bridge type consisting of a reinforced concrete slab extending in two directions supported directly by columns, with typical span lengths ranging from 6m to 12m.
Reinforced Concrete Deck Girder Bridge (RCDG)
A concrete bridge type that uses reinforced concrete girders as main structural supports for the deck slab, with typical span lengths ranging from 10m to 30m.
Pre-stressed Concrete Girder Bridge (PSCG)
A concrete bridge type utilizing girders embedded with pre-stressing tendons, providing span capabilities up to 40m, and up to 50m when using modified I-girders.
Steel Truss Bridge
A steel bridge constructed using connected structural members arranged in triangular units to manage compression stress, typically used for spans between 40m and 130m.
Arch Bridge
A curved structural bridge member spanning an opening that carries roadway loads primarily in compression stress towards the abutments.

Through-arch Bridge
A type of arch bridge where the deck passes through the arch, generating internal compression stress alongside vertical and horizontal reaction forces at the base supports.

Tied-arch Bridge
A type of arch bridge featuring a horizontal tie member that connects the arch ends to absorb horizontal thrust under tension stress, transmitting vertical reactions to supports.
Cable-stayed Bridge
A bridge system where diagonal stay cables extend directly from towers to support the bridge girder, suitable for span lengths of 70m and over.

Harp Design Cable-stayed Bridge
A cable-stayed bridge cable arrangement where cables are connected to the tower at various heights parallel to one another.

Fan Design Cable-stayed Bridge
A cable-stayed bridge cable arrangement where all supporting cables connect at or near the top of the tower and fan out to different locations along the deck girder.
Suspension Bridge
A long-span bridge system featuring main cables suspended between towers with vertical hanger ropes holding up stiffening girders or trusses, suitable for spans of 70m and over.
Bridge Alignment Types
The geometric classification of bridges based on horizontal roadway alignment, categorized into straight type and curved type.
Bridge
A structure spanning physical obstacles such as a body of water, valley, or road to provide passage, typically constructed from concrete, steel, or wood.
Superstructure
The upper portion of a bridge that directly receives and supports traffic loads, consisting of girders, diaphragms, and the deck slab.
Substructure
The lower supporting components of a bridge below the upper assembly that transfer loads to the ground, consisting of copings, piers, abutments, and foundations.
Deck Slab
The concrete surface layer of the upper bridge assembly that directly provides the roadway for vehicles or pedestrians.
Girder
A horizontal main supporting beam used in bridge construction to support the deck slab and carry longitudinal structural loads.
Interior Diaphragm
A transverse structural member placed between main girders to distribute loads horizontally and provide lateral rigidity.
Expansion Joint
An engineered gap in the bridge deck designed to safely accommodate expansion and contraction caused by thermal movement and concrete shrinkage.
Abutment
A substructure support structure located at the ends of a bridge that supports the superstructure spans and retains the adjacent roadway approach embankment.
Pier
An intermediate substructure support used in multi-span bridges to transfer loads from the superstructure down to the foundation.
Coping
The top capping layer or beam of a substructure element designed to distribute load evenly onto columns or shafts.
Pedestal
A concrete pad or block constructed above the coping to support bearings and seat the bridge girders.
Shear Block
A structural concrete block provided on the substructure coping to restrict lateral displacement of the upper structural elements.
Footing
The widened base of a substructure foundation that directly transmits structural loads into the soil or rock foundation bed.
Flat Slab Bridge
A concrete bridge type consisting of a reinforced concrete slab extending in two directions supported directly by columns, with typical span lengths ranging from 6m to 12m.
Reinforced Concrete Deck Girder Bridge (RCDG)
A concrete bridge type that uses reinforced concrete girders as main structural supports for the deck slab, with typical span lengths ranging from 10m to 30m.
Pre-stressed Concrete Girder Bridge (PSCG)
A concrete bridge type utilizing girders embedded with pre-stressing tendons, providing span capabilities up to 40m, and up to 50m when using modified I-girders.
Steel Truss Bridge
A steel bridge constructed using connected structural members arranged in triangular units to manage compression stress, typically used for spans between 40m and 130m.
Arch Bridge
A curved structural bridge member spanning an opening that carries roadway loads primarily in compression stress towards the abutments.
Through-arch Bridge
A type of arch bridge where the deck passes through the arch, generating internal compression stress alongside vertical and horizontal reaction forces at the base supports.
Tied-arch Bridge
A type of arch bridge featuring a horizontal tie member that connects the arch ends to absorb horizontal thrust under tension stress, transmitting vertical reactions to supports.
Cable-stayed Bridge
A bridge system where diagonal stay cables extend directly from towers to support the bridge girder, suitable for span lengths of 70m and over.
Harp Design Cable-stayed Bridge
A cable-stayed cable arrangement where cables are connected to the tower at various heights parallel to one another.
Fan Design Cable-stayed Bridge
A cable-stayed cable arrangement where all supporting cables connect at or near the top of the tower and fan out to different locations along the deck girder.
Suspension Bridge
A long-span bridge system featuring main cables suspended between towers with vertical hanger ropes holding up stiffening girders or trusses, suitable for spans of 70m and over.
Bridge Alignment Types
The geometric classification of bridges based on horizontal roadway alignment, categorized into straight type and curved type.
Wing Wall
A retaining side wall constructed at an abutment to retain earth embankment soil and prevent scour at the approach road.
Pile Bent Pier
A pier classification consisting of a row of driven piles connected at the top by a concrete or steel cap beam without a spread footing.
Minimum Vertical Clearance (No Debris)
The minimum required vertical distance between the design flood level and the bottom of the bridge girder when no debris is expected, equal to 1.0m.
Minimum Vertical Clearance (Navigation)
The minimum required vertical clearance between the maximum water level and the underside of the superstructure when navigation is required, equal to 1.5m or more.
Bridge Fixity at Bearings
The design configuration where one end of a span is fixed while the opposite end is allowed to slide, accommodating thermal expansion without unseating the superstructure.