1/18
Looks like no tags are added yet.
current
rate of flow of charge
I = Q/t
what do electrons need in order to flow
a potential difference (p.d.) provided by a battery
equation linking work done and p.d.
E = QV
energy transferred = work done
W = QV
V = W/Q (p.d. is the work done per unit of charge)
how does energy impact p.d. and current
more energy provided = greater p.d. and therefore greater current
what is resistance of a wire affected by
length of wire
thickness/cross sectional area of wire
material of wire
how does the length of the wire impact resistance
longer wire = higher resistance
how does thickness/cross sectional area of wire affect resistance
lower cross sectional area = higher resistance
what is resistance caused by
the collisions between flowing electrons and the fixed positive ions that are in the wire (electrons move through the wire away from the positive nuclei, leaving the positive ions behind)
the amp
the current flowing in 2 parallel wires 1m apart in a vacuum
such that there is an attractive force of 2 × 107 N
per metre length of wire between them
1 coulomb of charge passing a point in one second
emf (electromotive force)
electrical energy produced per unit charge
passing through the source
in a battery or generator
battery
source of EMF (electromotive force)
charge carriers
charged particles that carry current
e.g. electrons or ions
conventional current
before the electron was discovered, it was agreed that current goes from + to -
because electrons are negative, it is the other way round
charge carriers in an insulator
each electron is attached to an atom and cannot move away from the atom
when voltage is applied across an insulator, no current passes through the insulator
because no electrons can move through the insulator
charge carriers in a metallic conductor
most electrons are attached to atoms but some are delocalised
delocalised electrons are charge carriers in the metal
when voltage is applied, conduction electrons are attracted to the positive terminal of the metal
charge carriers in a semiconductor
the number of charge carriers increase with increase of temperature
resistance of a semiconductor therefore decreases as its temperature is raised
intrinsic semiconductor
a pure semiconducting material
because conduction is due to electrons that break free from the atoms of the semiconductor
energy transfer in a device that has resistance
e.g. electrical heater
work done on device is transferred as thermal energy
because charge carriers repeatedly collide with atoms in the device
transfer energy to them, so atoms vibrate more and resistor becomes hotter
energy transfer in an electronic motor turning at constant speed
work done on motor = energy transferred to load and surroundings by motor
this means that KE of motor remains constant
charge carriers are electrons that need to be forced through the wires of the spinning motor coil against the opposing force on the electrons due to the motor’s magnetic field