Quiz 2 (terms and theory)

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/105

encourage image

There's no tags or description

Looks like no tags are added yet.

106 Terms

1
New cards

Why Metals are Important

- They have high stiffness and strength allowing for being alloyed for high rigidity, strength and hardness

- A toughness that is better than other classes of materials

- Good electrical and thermal conductivity

- The Cost is not too much and competitive with ither engineering materials

2
New cards

Starting point for manufacturing processes of metals

Cast metal - starting form is a cast

Wrought metal - the metal has been worked or can be worked after the casting

Powdered metal - starting form is very small powders for conversion into parts using powder metallurgy techniques

3
New cards

Metal classification

Ferrous - based on iron (e.g. steels or cast irons)

Nonferrous - all other metals (e.g. Al, Mg, Cu, Ni, Ti, Pb, Sn, and others)

Superalloys - based on many different metal combinations but are meant to be capable for high performance at high temps.

4
New cards

Alloy categories

1. Solid solution

2. Intermediate phase

5
New cards

Solid Solutions

An alloy in which one element is dissolved in another to form a single - phase structure

6
New cards

A phase

any homogeneous mass of material such as metal in which all the grains have the same crystal lattice structure

7
New cards

Forms of Solid Solutions

1. Substitutional: atoms of the solvent element are replaced in its unit cell by the dissolved element

2. Interstitial: atoms of dissolving element fit into vacant spaces between base metal atoms in the lattice structure

8
New cards

Intermediate Phases

Describes the chemical composition is intermediate between the two pure elements

- Crystalline structure is also different from those of the pure metals

9
New cards

Types of Intermediate Phases

1. Metallic compounds - consists of metal and nonmetal, such as Fe3C

2. Intermetallic compounds - two metals that form a compound, such as Mg2Pb

- In some alloy compositions the intermediate phase is mixed with the primary solid solution to form a two - phase structure

10
New cards

Phase Diagrams

Graph representing the phases of an alloy system as a function of composition and temperature

- Binary phase diagram used for an alloy system consisting of two elements at atmospheric pressure

11
New cards

Cu - Ni Alloy System

Solid solution alloy throughout entire range of compositions below the solidus

- No intermediate solid phases

- There is a mixture of phases in the region bounded by the solidus and liquidus

12
New cards

Chemical Compositions of Phases

- Overall composition of the alloy is given by its position along the horizontal axis

- Compositions of liquid and solid phases are not the same

- This is found by drawing a horizontal line and see where it intersects the solidus and liquids indicates the composition of solid and liquid phases, respectively

13
New cards

Sn - Pb Alloy System

- Widely used in soldering for making electrical connections

- Contains two solid phases alpha and beta

- Alpha = solid solution of tin in lead at the left side of diagram

- Beta = solid solution of lead in tin ate around 200 at right side of diagram

- Between these solid solutions lies a mixture of the two solid phases

14
New cards

Melting in the Sn - Pb Alloy System

- Pure tin melts at 232

- Pure lead melts at 327

- Sn - Pb alloys melt at lower temps.

Diagram has two liquidus lines beginning at the melting points of the pure metals and meets at a composition of 61.9% Sn

- This is the eutectic composition for the Sn-Pb system

15
New cards

Eutectic Alloy

Particular composition in an alloy system for which the solidus and liquidus are at the same temperature

- Eutectic temperature is always the lowest melting point for an alloy system

16
New cards

Ferrous Metals

Based on iron

-Two major groups of steel and cast iron

-These two constitute roughly 85% of the metal tonnage in the US

17
New cards

Phases of iron

1. Predominate phase at room temp alpha is ferrite (BCC)

2. Ferrite transforms to gamma called austenite (FCC)(912 C)

3. (1394 C) to delta (BCC)

4. Pure iron melts at 1539 C

18
New cards

Iron as a Commercial Product

- Electrolytic iron: the purest typically used for research and other purposes when pure metal is required

- Ingot iron: contains about 0.1% impurities used when high ductility or corrosion resistance are needed

- Wrought iron: contains about 3% slag but very little carbon and is easily shaped in hot forming operations such as forging

19
New cards

Solubility limits of carbon in iron

- Ferrite phase can dissolve on 0.022% carbon at 723 C

- Austenite can dissolve up to about 2.1% carbon at 1130 C

20
New cards

Steel and Cast iron Defined

Steel = an iron-carbon alloy containing from 0.02% to 2.1% carbon

Cast iron = an iron-carbon alloy containing from 2.1% to 4% or 5% carbon

21
New cards

Cementite (iron-carbon)

This occurs at equilibrium conditions at room temperature where there is a two-phase system at carbon levels that are slightly above 0. This is an intermediate phase of a metallic compound of iron and carbon that is hard and brittle

22
New cards

Eutectic and Eutectoid Compositions

Eutectic composition (Fe-C) = 4.3% C and changes from slid to liquid at 1130 C

Eutectoid composition (Fe-C) = 0.77% C phase change from alpha to gamma above 723 C

-Below 0.77% C = hypoeutectic

-between 0.77% to 2.1% = hypereutectic

23
New cards

Iron and steel production

- iron is reduced from ore to create pig iron

-steel is formed from refined pig iron and then refined to the desired purity and composition

24
New cards

Principal ore of iron and steel

hematite

25
New cards

Other raw materials in iron making

Coke, Limestone, and hot gases

26
New cards

Iron making

You can make iron in a blast furnace with the addition of coke, limestone, and hot gases

27
New cards

Post blast furnance

after iron has gone through a blast furnace there are more refinements that are required such as using a cupola to convert pig iron into gray cast iron

28
New cards

2 most important process in steel making

1. Basic oxygen furnace

2. Electric furnace

29
New cards

Basic oxygen furnace

Accounts for 70% of steel production in US, is an adaptation of the Bessemer converter and can take about 45 min per cycle

30
New cards

Electric arc furnace

Accounts for 30% of steel production in US, tends to be associated with production of alloy steels, tool steels, and stainless steels

31
New cards

Casting procees

1. Casting of ingots: a discrete production process

2. Continuous casting: a semi-continuous process

32
New cards

Casting of ingots

steel ingots = discrete castings weighing from less than one ton up to 300 tons (entire heat)

33
New cards

Continuous Casting

Widely applied in aluminum and copper production but is most known to dramatically increase productivity compared to ingot casting

34
New cards

Steel

Alloy of iron containing 0.02 to 2.11 % carbon by weight

5 categories

1. Plain carbon steels (carbon is principal alloying element)

2. Low alloy steels

3. stainless steel

4. tool steels

5. specialty steels

35
New cards

3 Types of Plain Carbon Steels

1. Low carbon steel (less than 0.2% C)

2. Medium carbon steels (0.2% to 0.5% C)

3. High carbon steel (greater than 0.5%)

36
New cards

Low Alloy steels

Iron - carbon alloys containing additional alloying elements in amounts totaling less than 5% by weight with high strength, hardness, hot hardness, wear resistance, and toughness

37
New cards

Stainless Steel

Highly alloyed steels designed for corrosion resistance and a principal alloying element of chromium usually greater than 15%, SS is also known for its combination of strength and ductility

38
New cards

Types of Stainless Steel

1. Austinite stainless - composition of 18% Cr and 8% Ni

2. Ferrite stainless - about 15% to 20% Cr, low C and no Ni

3. Martensite stainless - as much as 18% Cr but no Ni, higher C content than ferritic stainless

39
New cards

Tool steels

A class of (usually) highly alloyed steels designed for use as industrial cutting tools, dies, and molds

40
New cards

Specialty steels

1. Maraging steels: low C alloys containing high Ni content and lesser amounts of Co, Mo, and Ti

2. Free-machining steels: C steels formulated with small amounts of S, Pb, Sn, and other elements to improve machinability

3. Interstitial-free steels: extremely low C content for excellent ductility for deep drawing

41
New cards

Cast irons

Iron alloys containing from 2.1% to about 4% carbon and from 1% to 3% silicon

42
New cards

Types of cast irons

1. Gray cast iron (most important)

2. Ductile iron

3. white cast iron

4. malleable iron

5. various alloy cast irons

43
New cards

Gray cast iron

Chemistry: 2.5 to 4% C, 1 to 3% Si, very low ductility, form graphite flakes throughout the cast production upon solidification

44
New cards

Nonferrous metals

Metal elements and alloys not based on iron

45
New cards

Aluminum Production

Principal ore is bauxite

46
New cards

Properties of Aluminum

Low density, high electrical and thermal conductivity, excellent corrosion resistance, very ductile metal, pure aluminum is relatively low in strength, but it can be alloyed and heat treated to compete with some steels

47
New cards

Properties of Magnesium

A pure metal and lightest of structural metals, relatively soft, and lacks strength for most engineering applications. Once alloyed and heat treated, it can have strength comparative to aluminum alloys

48
New cards

Copper Properties

Density higher than iron, low electrical resistivity, excellent thermal conductor, noble metal so it is corrosion resistant

49
New cards

Copper Alloys

1. Bronze: alloy of copper and tin (typically 90% Cu and 10% Sn)

2. Brass: alloy of copper and zinc (typically 65% Cu and 35% Zn)

3. Highest strength alloy is beryllium-copper (only about 2% Be) which can be heat treated to high strengths ad used for springs

50
New cards

Nickel Alloys

Tend to be similar to iron in some respects, commercially important and are noted for corrosion resistance and high temperature performance and some superalloys are based on nickel

51
New cards

Properties of Titanium

Stiffer and stronger than Al, retains good strength at elevated temperatures, pure Ti is reactive and presents problems while processing

52
New cards

Refractory Metals

Metals capable of enduring high temperatures - maintaining high strength and hardness at elevated temperatures

-Molybdenum and Tungsten are the most important refractory metals

53
New cards

Precious Metals

Gold, platinum, and silver these are limited in supplies and chemically inert making them noble metals and they have high density, good ductility, high electrical conductivity and corrosion resistance and moderate melting temperatures

54
New cards

Superalloys

High-performance alloys designed to meet demanding requirements for strength and resistance to surface degradation at high service temperatures

55
New cards

Groups of superalloys

1. Iron - based alloys: some case the iron is less than 50% of total composition

2. Nickel - based alloys: better high temperature strength than alloy steels

3. Cobalt - based alloys: 40% Co and 20% chromium

56
New cards

Ceramic

Inorganic compound consisting of a metal (or semi-metal) and one or more nonmetals

57
New cards

Properties of ceramics

High hardness, electrically and thermally insulating, chemically stable, high melting temperatures, brittle, and virtually no ductility

58
New cards

Ceramic Products

1. Clay construction products: bricks, clay pipe, and building tile

2. Refractory ceramics: capable of high temperature applications such as furnace walls, crucibles, and molds

3. Cement in concrete: used for construction and roads

4. Whiteware products: pottery, stoneware, porcelain, and other tableware, based on mixtures of clay and other minerals

5. Glass: bottles, glasses, lenses, windowpane, and light bulbs

6. Glass fibers: thermal insulating wool, reinforced plastics, and fiber optics communication lines

7. Abrasives: aluminum oxide and silicon carbide in grinding wheels

8. Cutting tool materials: tungsten carbide, aluminum oxide, and cubic boron nitride

(*There are many more refer to the slides for ceramics)

59
New cards

Basic categories of ceramics

1. Traditional ceramics: clay products such as potter, bricks, common abrasives, and cement

2. New ceramics: more recently developed ceramics based on oxides, carbides, etc., with better mechanical and/or physical properties than traditional ceramics

3. Glasses: based primarily on silica and distinguished by their non-crystalline structure

60
New cards

Strength Properties of Ceramics

Ceramics should have a higher strength than metals due to their bonds, but they do not slip like the metallic bonds do which allow them to deform plastically when stressed

61
New cards

How are ceramics stronger

Ceramics are substantially stronger than compression than in tension

62
New cards

Strengthening Ceramics

1. Make starting material more uniform

2. Decrease grain size in polycrystalline ceramic products

3. Minimize porosity

4. Introduce compressive surface stresses

5. Use fiber reinforcement

6. Heat treat

63
New cards

Traditional Ceramics

Based on mineral silicates, silica, and mineral oxides found in nature

64
New cards

New Ceramics

Ceramic materials developed synthetically over the last several decades

- Based upon compounds other than variations of aluminum silicate

65
New cards

Oxide Ceramics

These are ceramics that include oxygen in their compound the most important being alumina

66
New cards

Carbide Ceramics

These are ceramics that include carbon in their compound and tend to be hard and wear resistant typically used in cutting tools

67
New cards

Nitrides

These are ceramics that include nitrogen with the most important being silicon nitride, boron nitride, and titanium nitride. These tend to be hard, brittle, high melting temperatures, and usually electrically insulating

68
New cards

Glass

This is both a state of matter and a type of ceramic

- As a state of matter, glass refers to an amorphous (non-crystalline) structure of solid material

- As a type of ceramic, glass is an inorganic, nonmetallic compound that cools to a rigid condition without crystallizing

69
New cards

The best glass former

SiO2

70
New cards

Function of other ingredients in glass

- They act as a flux during heating

- Increase fluidity in molten glass for processing

- Improve chemical resistance against attacks by acids, basic substances or water

- Add color

71
New cards

Glass - Ceramics

A ceramic material produced by conversion of glass into a polycrystalline structure through heat treatment

72
New cards

Advantages of Glass - Ceramics

- Efficiency of processing in the glassy state

- Close dimensional control over final shape

- Good mechanical and physical properties

- High strength (stronger than glass)

- Absence of porosity; low thermal expansion

- High resistance to thermal shock

73
New cards

Polymers

Compound consisting of long-chain molecules, each molecule made up of repeating units connected together by

74
New cards

Types of polymers

1. Thermosetting polymers (plastic)

2. Thermoplastic polymers (plastic)

3. Elastomers (rubber)

75
New cards

Thermoplastic polymers

Solid materials at room temperature but viscous liquids when heated to temperatures of only a few hundred degrees

76
New cards

Thermosetting polymers

Cannot tolerate repeated heating cycles as thermoplastics can

77
New cards

Elastomers

polymers that exhibit extreme elastic extensibility when subjected to relatively low mechanical stress

78
New cards

Market shares

Thermoplastics are commercially the most important of the three types making up about 70% of the tonnage of all synthetic polymers produced are TP

79
New cards

Properties of Polymers

Low density relative to metals and ceramics, good strength-to-weight ratios for certain polymers, high corrosion, low electrical and thermal conductivity,

80
New cards

Polymerization

Chemical process, the synthesis of polymers can occur by 2 methods:

1. Addition polymerization

2. Step polymerization

81
New cards

Addition polymerization

In this process, the double bonds between carbon atoms in the ethylene monomers are induced to open so they can join with other monomer molecules

82
New cards

Step polymerization

In this form of polymerization, two reacting monomers are brought together to form a new molecule of the desired compound.

83
New cards

Degree of Polymerization

The mean value of n is which is the average for a batch of polymerized materials that vary in length

84
New cards

Molecular weight

The sum of the molecular weights of the mers in the molecule

85
New cards

Polymer Molecular Structure

1. Linear: chain-like structure

2. Branched: chain-like but with side branches

3. Cross-linked: Loosely cross-linked characteristic of elastomers and tightly cross-linked characteristics of thermosets

86
New cards

Effects of Branching

Branches increase entanglement among the molecules which makes polymers in solid state stronger, and more viscous at a given temperature in plastic or liquid state

87
New cards

Effects of Cross-Linking

thermosets posses a high degree of cross-linking.

thermosets become hard and brittle

causes polymer to become chemically set

-reaction cannot be reversed

-polymer structure is permanently changed

if heated it degrades instead of melts.

88
New cards

Crystallinity and Properties

Crystallinity increasing in polymers leads to:

-Density increase

-Stiffness, strength, and toughness increase

-Heat resistance increase

-If the polymer is transparent in the amorphous state, it becomes opaque when partially crystalized

89
New cards

Additives

Properties of a polymer can be beneficially changed by combining it with additives

90
New cards

3 types of cross-linking

1. Temperature-activated systems (caused by heat supplied during shaping)

2. Catalyst-activated systems (occurs when small amounts of a catalyst are added when it is in liquid form)

3. Mixing-activated systems (occurs when mixing two chemicals resulting in the cross-linked solid polymers)

91
New cards

Vulcanization

Term for curing in the context of natural rubber

92
New cards

Plastic recycling

Roughly 200 million tons of plastic products are made annually throughout the world with the US being roughly a 1/4 of that and only 6% of that is recycled as plastic waste

93
New cards

Why plastic is hard to recycle

Economically it cost more to recycle plastics compared to metals or glass due to plastic products being generally small and made from a variety of chemicals that don't mix well together

94
New cards

Forms of biodegradable plastics

1. Partially biodegradable: consist of a conventional polymer plus biodegradable filler

2.Completely biodegradable: consist of polymer plus filler, both of which are biodegradable

95
New cards

Composite materials

Material system composed of two or more distinct phases whose combination procedure aggregate properties different from those of its constituents

96
New cards

Classification of Composites

1. Traditional Composites: composite materials that occur in nature or have been produced by civilization for many years

2. Synthetic Composites: modern material systems normally associated with manufacturing

97
New cards

Components in Composites

1. Primary phase: forms the matrix within which the secondary phase is imbedded

2. Secondary phase: imbedded phase sometimes referred to as a reinforcing agent because it usually strenghrens the composite material

98
New cards

Classification of Composite Materials

1. Metal Matrix Composites (MMC): mixtures of ceramics and metals, such as cemented carbides and other cerments

2. Ceramic Matrix Composites (CMC): AL2O3 and SiC imbedded with fibers to improve properties

3. Polymer Matrix Composites (PMC): polymers resins imbedded with filler or reinforcing agent

99
New cards

Reinforcing Phase

Function is to reinforce the primary phase

100
New cards

Fibers

Filaments of reinforcing material, usually circular in cross section