Water and Fuel Systems Maintenance Journeyman Volume 1

The manuals the Air Force (AF) develops or pays a contractor to develop for all equipment built to military specifications are called?

a. Technical orders (TO)

b. joint use manuals

c. commercial off the shelf (COTS) manuals

d. time compliance technical orders (TCTO) manuals

a. Technical orders (TO)

Which manuals use a layout that follows the one used by the branch of service that initially had it developed?

a. technical orders (TO)

b. joint use manuals

c. technical manuals(TM)

d. commercial off the shelf (COTS) manual

b. joint use manuals

Which manual comes with locally procured equipment items?

a. technical orders (TO)

b. joint use manuals

c. technical manuals(TM)

d. commercial off the shelf (COTS) manual

d. commercial off the shelf (COTS) manual

Which manuals may include actions to modify equipment, perform special inspections, or change operating procedures?

a. time compliance technical orders (TCTO)

b. abbreviated technical orders (TO)

c. technical manuals

d. joint use manuals

a. time compliance technical orders (TCTO)

Which type of time compliance technical orders can be identified by a border of red Xs around the page?

a. inspection

b. urgent action

c. routine action

d. immediate action

d. immediate action

Which type of time compliance technical orders can be identified by a border of alternating red Xs and slashes (/) around the page?

a. inspection

b. urgent action

c. routine action

d. immediate action

b. urgent action

Why must you identify any problems you find in a technical order (TO)?

a. it shows that you read the TO

b. it shows that you always use the TO

c. to allow all Air Force personnel to complete the task differently

d. to allow all AF personnel to complete the task the same way

d. to allow all AF personnel to complete the task the same way

Which is the best method to make corrections to problems in a technical order?

a. a team effort of many airman

b. your effort researching the problem

c. a team effort of many knowledgeable individuals

d. your effort experimenting with possible corrections

c. a team effort of many knowledgeable individuals

What Air Force instruction (AFI) covers waste management?

a. AFI 36-2903

b. AFI 32-7042

c. AFI 38-5243

d. AFI 33-2233

b. AFI 32-7042

Where can you find container labeling guidelines?

a. installation hazardous waste management plan (HWMP)

b. in the power production section

c. the environmental flight

d. installation library

a. installation hazardous waste management plan (HWMP)

What are the three principal accident prevention methods?

a. punishment, disciplinary action, and deterrence

b. behavior modification, motivation, and strict adhere to the rules

c. accident investigation, safety standards, and use of large hazard markings

d. physical modification, education and training, and enforcement of safety standards.

d. physical modification, education and training, and enforcement of safety standards.

What Air Force (AF) form do you complete to report a hazard?

a. AF Form 457, USAF Hazard Report

b. AF Form 448, USAF Hazard Report

c. AF Form 457, USAF Danger Report

d. AF Form 448, USAF Danger Report

a. AF Form 457, USAF Hazard Report

Which organization provides research, information programs, education, and field training and conducts surveys to determine the most common health and safety problems in small business?

a. Environmental Protection Agency (EPA)

b. National Environmental Policies Act

c. Occupational Safety and Health Act (OSHA)

d. National Institute for Occupational Safety and Health (NIOSH)

c. Occupational Safety and Health Act (OSHA)

Which item under the Occupational Safety and Health Act provides requirements to manage identification and knowledge of a material's chemical makeup and associated hazards?

a. Material safety data sheet (MSDS)

b. Hazard communication (HAZCOM) standard

c. Hazardous communication program guide

d. National Institute for Occupational safety and health guide

a. Material safety data sheet (MSDS)

Who must develop, implement, and maintain a written hazard communication program for workplaces?

a. Workers

b. Supervisors

c. Local Government employees

d. Department of Defense personnel

b. Supervisors

Other than training for a new job assignment, when must a supervisor provide an employee training on hazardous materials?

a. Annually, to meet requirements

b. any time a new hazard is introduced

c. Whenever a federally mandated training is required

d. Whenever there are changes in the environmental protection agency rules

b. any time a new hazard is introduced

What are the two main hazards of using electrical power tools?

a. Fire and shock

b. Shock and grounding

c. Fire and cord abuse

d. Grounding and cord abuse.

a. Fire and shock

A properly grounded power tool and extension cord has?

a. one wire

b. two wires

c. three wires

d. four wires

c. three wires

When using electrical equipment in a damp location, you should?

a. wear safety glasses and safety boots

b. wear cotton gloves and stand on a asbestos mat

c. check the circuit breaker and wall receptacle before starting

d. stand on a rubber mat and wear rubber gloves rated for the application.

d. stand on a rubber mat and wear rubber gloves rated for the application.

When referring to electrical circuits, a closed circuit means?

a. electricity is traveling through the line

b. electricity has been shut off

c. electricity poses no hazard

d. the line is safe to work on

a. electricity is traveling through the line

What item should you use to remove someone from an energized circuit?

a. metal pole

b. piece of dry wood

c. piece of wet wood

d. wet article of clothing

b. piece of dry wood

What is the actual cause of electric shock?

a. excess voltage

b. damp receptacles

c. current flow through the human body

d. your bodies resistance to electricity

c. current flow through the human body

You are more likely to get a fatal electrical shock from a?

a. medium-voltage circuit

b. macro-voltage circuit

c. high-voltage circuit

d. low-voltage circuit

c. high-voltage circuit

After an electrical shock victim has been removed from the circuit, what is the first step to take?

a. check for pupil dilation

b. look for visible burn marks

c. give the victim a drink of water

d. check to see if the victim is breathing

d. check to see if the victim is breathing

What is the greatest danger when the heart or breathing stops?

a. victims temperature cools down

b. lack of circulation to the hands

c. lack of oxygen to the brain

d. shock sets in

c. lack of oxygen to the brain

When administering cardiopulmonary resuscitation (CPR), what is the ratio of chest compressions to ventilations (rescue breathing)

a. 30-2

b. 20-5

c. 20-2

d. 30-5

a. 30-2

How far do you depress the breastbone when applying chest compressions during CPR?

a. 3/4 to 1 inch

b. 1/2 to 3/4 inches

c. 1 to 1- 1/2 inches

d. 1- 1/2 inches to 2 inches

d. 1-1/2 inches to 2 inches

What is one simple step you should take when caring for a shock victim?

a. make the victim sit up

b. give the victim water

c. maintain normal body temperature

d. elevate the victims legs 12 inches

c. maintain normal body temperature

What form is used for protection fo personnel in lock out tag out procedures?

a. Air Force form 979

b. AF Form 980

c. AF Form 782

d. AF Information management tool (IMT) 103

a. Air Force Form 979

What AF form is used to warn against potential hazards, caution against unsafe practices, and to prescribe precautions to protect personnel and property?

a. AF Form 207

b. AF Form 980

c. AF Form 781

d. AF Form 797

b. AF Form 980

When working around moving equipment, avoid?

a. touching ground surfaces

b. wearing loose clothing

c. wearing damp clothing

d. using pointed tools

b. wearing loose clothing

Equipment components ( such as flywheels, pulleys, belts, chains, and clutches) require machine guarding if they are located less than how many feet off the floor?

a. 8

b. 9

c. 10

d. 12

a. 8

When a ladder is properly erected, what is the required distance between the base of the ladder and the side of the building?

a. 1/8 the ladder length

b. 1/4 the ladder length

c. 1/2 the ladder length

d. 1/3 the ladder length

b. 1/4 the ladder length

You must secure scaffolding to the building when its height exceeds how many times its minimum base dimension?

a. two

b. three

c. four

d. five

b. three

For what purposes is the Department of Defense (DOD) Form 1574 yellow tag used?

a. Unserviceable equipment

b. Condemned equipment

c. Serviceable equipment

d. Recycled equipment

c. Serviceable equipment

What colored tag is used when equipment is condemned?

a. Red

b. Green

c. Black

d. Yellow

a. Red

Which method is the least likely means of industrial exposure of toxic chemicals?

a. Follicle penetration

b. Breathing vapors

c. Skin absorbency

d. Swallowing

d. Swallowing

Before using laboratory equipment, you should consult the?

a. sales representative

b. lab opening instructions

c. standard laboratory methods

d. technical order (TO) and manufacture manuals

d. technical order (TO) and manufacture manuals

In children, very low levels of lead based paint causes?

a. learning disabilities

b. mental retardation

c. coma

d. death

a. learning disabilities

Which type of fire extinguisher should you use to extinguish fires caused by flammable/combustable liquids, oils, or greases?

a. A

b. B

c. C

d. D

b. B

Who, from the fire department is responsible for examining an area before you solder?

a. Technical services branch inspector

b. Production control technician

c. Base Safety inspector

d. Supervisor

a. Technical services branch inspector

Which gas is distinguishable by its "rotten eggs" odor?

a. Methane

b. Sulfur dioxide

c. Hydrogen Sulfide

d. Ammonium hydroxide

c. Hydrogen Sulfide

What is the lowest percentage of oxygen available needed to sustain human life?

a. 16.5

b. 17.5

c. 18.5

d. 19.5

d. 19.5

A pipe carrying steam is safety color coded?

a. Red

b. Blue

c. Gray

d. Brown

c. Gray

An Air Force information management tool (IMT) 103, Base Civil Engineering work clearance request, is required?

a. after you finish excavation or utility work

b. when hazards are in the area of an excavation

c. when delays are encountered and conditions on the job site change

d. before you start any work that involves excavation or utilities disturbance.

d. before you start any work that involves excavation or utilities disturbance.

The information on AF IMT 103, Base CE work clearance request, helps you?

a. find previous closed out work orders

b. determine the work load for the next fiscal year

c. find the type of materials needed to do a work order

d. determine what precautions are necessary to protect existing underground utilities while digging.

d. determine what precautions are necessary to protect existing underground utilities while digging.

According to OSHA classification, which type of soil has water freely seeping and submerged rock that is not stable?

a. Stable rock

b. Type A

c. Type B

d. Type C

d. Type C

What are two methods used to protect workers from cave-ins?

a. sloping and leveling

b. stepping and sloping

c. sloping and benching

d. benching and stepping

c. sloping and benching

If there is sloping toward the excavation, what is the minimum distance the shielding must extend above the surrounding area?

a. 12 inches

b. 18 inches

c. 24 inches

d. 30 inches

b. 18 inches

In trenches 4 feet or more deep, access ladders must be located at safe and convenient exits and must not be spaced more than how many feet apart?

a. 10

b. 15

c. 20

d. 25

d. 25