1/58
Looks like no tags are added yet.
Prohibited
The use of beverages, food, tobacco, and chewing gum are ________ in lab in addition to applying cosmetics
Cell phones
_____________ should be put away in lab to hear instructions, avoid distractions, and avoid contamination
tops of your shoulders
Hair restraints should be used if your hair is longer than the _________ .
Closed-toe
You must where _________ shoes for footwear
Eye protection
You must have ________________ to protect fluids from splashing in your eyes.
Test-tube rack
You should always use a ____________ to carry tubes from different benches or stations
Biohazard
You should follow your instructors’ directions for discarding all used media, glass pipettes, swabs, petri dishes, and other contaminated articles in the proper ________ containers.
before and after each use
When should you flame your inoculating loop or needle?
Aseptic technique
A set of strict infection‑prevention practices—such as using sterile gloves, gowns, equipment, and controlled environments—designed to eliminate pathogens during medical and laboratory procedures.
Aseptic
You should handle test-tubes, pipettes, reagent bottles, and petri-dishes carefully and with attention to __________ technique.
Disinfect
You should __________ your lab bench before and after each class with 70% ethanol
Lab Manual
You should clear the benchtop of all materials not needed to perform the experiment and keep your _______ off to the side
Coat racks
Backpacks, purses, books, lunches, etc should be kept out of the way, by the __________ in the back of the lab.
Instructor
Report any accidents to the ____________
soap and water
Wash your hands thoroughly with ________________ before and after each lab.
Gas valve
Double check the _________ is off after each lab
Chemical, equipment, environment (workplace) and biohazards (microbes)
What are the four types of hazards that can exist in the lab?
eliminating
We can avoid exposure by _______ hazards that are unnecessary
Substitution
We can avoid exposure by using less hazardous alternatives
Engineering controls
We can avoid exposure by using facility protections
Administrative controls
We can avoid exposure by following lab rules and training in procedures
Personal Protective equipment
We can avoid exposure by wearing ______________
4
How many levels of biosafety are there?
BSL-2
What level of biosafety is GVSU’s microbiology lab?
BSL-2
Biosafety level that involves some pathogenic bacteria and viruses. Requires a biosafety cabinet, trained personnel, and an eyewash station.
BSL-2
Biosafety level with no airborne pathogen. Requires handwashing, disinfection, and PPE
Streak Plate
A procedure done to isolate single colonies of bacteria by inoculating quadrants of a Petri dish with more and more diluted samples of bacteria.
Streak Plate
Diluting a mixture of bacteria on an agar-based medium contained in a Petri dish. Can be used to isolate colonies from a mix and produce a pure sample.
Pour plate
A procedure where one mixes a sample of a bacterial mixture with molten agar media and pouring it into a petri dish to isolate colonies.
Pure Culture
A culture containing only one type of bacteria
The presence of additional organisms can confound the interpretation of any analyses
Why is it important to have a pure culture?
Aseptic techniques
Techniques and precautions to reduce the chance of contaminating the culture, ourselves, and those working around us.
Aseptic Techniques
Examples of __________ __________ include handwashing, wiping down the benchtop with diluted alcohol before and after using the area, flaming the inoculating loop and needle before and after each use and flaming the tops of tubes containing bacterial cultures
Robert Koch
Who developed techniques for isolating pure cultures in addition to several aseptic techniques?
Robert Koch
He developed the streak plate and pour plate to isolate bacteria.
Inverted with the lid on the bottom to prevent picking up only the lid
How should agar plates always be stored?
Bottom of the Plate
Should you label the lid or the bottom of the petri plate with the inoculation date, lab section number, organism, mix, and initials?
Turbidity
What shows signs of bacterial growth?
Streak plate technique
In a 4-quadrant streak plate you streak a quadrant, flame, then streaking the next quadrant grabbing only a few bacteria from the first quadrant.
Isolated Colonies
A properly performed streak plate will exhibit a discernible decrease in bacterial concentration from one quadrant to the next and will ultimately produce _________ __________.
Colonies
Streak plates allow us to see individual _________ and their color and morphology.
Pour plate
Which technique requires dilution before inoculating: streak plate or pour plate?
Agar deep
What do you inoculate then pour into the petri dish in a pour plate?
Clear
A negative result for bacterial growth is usually _________
Loop
When transferring broth from one tube to another, it is best to use a __________
Loosely
To re-cap a tube cap it _______ so you can easily reopen it without having to use both hands.
Viable Plate Count
A method used to count microorganisms where a dilution of the sample is plated onto an agar medium
30-300
What is the ideal number of cells on a viable plate count to ensure statistical accuracy yet avoid nutrient competition.
No; while most colonies arise from one cell sometimes
Can we be sure that each colony can from exactly one cell?
colony-forming units (cfu) / mL
What is the unit that is used for a viable plate count?
Diluted
If cell numbers are too high the sample must be _________.
Concentrated
If cell numbers are too high then the sample must be ______ which involves filtration through a filter with extremely small pores. This is a less common practice.
Dilutions
Careful, aseptic pipetting of a known volume of a sample into a known volume of a sterile diluent.
Original Cell Density
What does OCD stand for?
Colony Forming Units
What does cfu stand for?
Formula for dilution factor
ml of sample/ total ml of final solution
Formula for dilution factor
ml sample / (ml sample+ ml diluent)
1/10
What would be the dilution factor if I mixed 1 ml of broth with 9ml with a sterile dilution buffer?
1/10
1 ml sample + 99 ml diluent and 0.1 ml + 9.9 ml diluent are both ________ dilutions.