1/159
Looks like no tags are added yet.
What are the 12 knowledge areas covered by the Remote Pilot sUAS study guide?
1) Applicable regulations; 2) airspace classification/requirements/restrictions; 3) aviation weather sources and effects; 4) small UA loading; 5) emergency procedures; 6) crew resource management; 7) radio communication procedures; 8) determining small UA performance; 9) physiological effects of drugs/alcohol; 10) aeronautical decision-making and judgment; 11) airport operations; 12) maintenance and preflight inspection procedures.
What regulation is the Remote Pilot sUAS knowledge test based on?
Title 14 CFR part 107, section 107.73(a).
What FAA publication does the guide say remote pilots should know along with 14 CFR part 107?
AC 107-2, along with 14 CFR part 107 and referenced regulations.
What are the two broad categories of airspace?
Regulatory and nonregulatory.
What are the four types of airspace identified in the study guide?
Controlled, uncontrolled, special use, and other airspace.
What controlled airspace classes concern remote pilots?
Class B, Class C, Class D, and Class E.
What is Class B airspace generally?
Airspace generally from the surface to 10,000 feet MSL surrounding the nation's busiest airports; the configuration is individually tailored.
What is required before a remote pilot operates in Class B airspace?
ATC authorization.
What is Class C airspace generally?
Airspace generally from the surface to 4,000 feet above airport elevation surrounding qualifying airports with an operating control tower and radar approach control.
What is required before operating a small UA in Class C airspace?
Authorization.
What is Class D airspace generally?
Airspace generally from the surface to 2,500 feet above airport elevation surrounding an airport with an operating control tower.
What is required before operating a small UA in Class D airspace?
ATC authorization.
What is Class E airspace?
Controlled airspace not classified as Class A, B, C, or D.
What is the usual Class E base in most areas?
1,200 feet AGL, although Class E can also begin at the surface, 700 feet AGL, or a charted MSL altitude.
Does the study guide generally require ATC authorization for small UA operations in Class E?
In most areas, no.
What is Class G airspace?
Uncontrolled airspace that has not been designated as Class A, B, C, D, or E.
Does a remote pilot generally need ATC authorization to operate in Class G airspace?
No.
What are the six types of special use airspace listed in the guide?
Prohibited areas, restricted areas, warning areas, military operation areas (MOAs), alert areas, and controlled firing areas (CFAs).
What is a prohibited area?
Airspace of defined dimensions within which aircraft flight is prohibited, established for security or other national-welfare reasons.
How are prohibited areas charted?
With a 'P' followed by a number, such as P-40.
What is a restricted area?
Airspace where operations are hazardous to nonparticipating aircraft and flight is subject to restrictions.
What may happen if a restricted area is active and not released to the FAA?
ATC issues a clearance that ensures the aircraft avoids the restricted airspace.
How are restricted areas charted?
With an 'R' followed by a number, such as R-4401.
What is a warning area?
Airspace of defined dimensions extending from 3 NM outward from the U.S. coast that contains activity potentially hazardous to nonparticipating aircraft.
How are warning areas identified?
With a 'W' followed by a number.
What is a Military Operations Area (MOA)?
Airspace with defined vertical and lateral limits established to separate certain military training activities from IFR traffic.
How are MOAs normally named on charts?
By name rather than a number, such as Camden Ridge MOA.
What is an alert area?
An area that may contain a high volume of pilot training or unusual aerial activity; pilots should exercise caution.
How are alert areas charted?
With an 'A' followed by a number.
What is a controlled firing area (CFA)?
An area containing potentially hazardous activities that are suspended when a spotter, radar, or ground lookout indicates an aircraft may be approaching.
Why are CFAs not charted?
They do not cause nonparticipating aircraft to change their flight path.
What are Military Training Routes (MTRs)?
Routes used by military aircraft to maintain proficiency in tactical flying.
How are MTRs identified?
IFR routes use IR followed by a number; VFR routes use VR followed by a number.
What does a four-digit MTR number indicate?
The route has no segment above 1,500 feet AGL.
What does a three-digit MTR number indicate?
The route includes one or more segments above 1,500 feet AGL.
What is a Temporary Flight Restriction (TFR)?
A temporary restriction designated by an FDC NOTAM that specifies the location, time period, area, altitudes, and other relevant information.
What is the pilot's responsibility regarding TFRs?
To be aware of TFRs in the proposed area of flight and check them during flight planning.
What is the primary purpose of the ATC system?
To prevent collisions between aircraft and organize and expedite the flow of traffic.
What is a NOTAM?
Time-critical aeronautical information that is temporary or not known sufficiently in advance for publication on charts or other operational publications.
What kinds of hazards can generate NOTAMs?
Examples include air shows, parachute jumps, kite flying, rocket launches, inoperable obstruction lights, temporary obstacles, and bird activity.
What does METAR mean in the study guide's terminology?
An observation of current surface weather reported in a standard international format.
What is a SPECI?
A special METAR that can be issued at any time to update rapidly changing weather, aircraft mishaps, or other critical information.
In a METAR, what does the Z after the time mean?
The time is given in UTC (Zulu time).
In a METAR, what does AUTO indicate?
The report came from an automated source.
How is wind direction reported in a METAR?
The first three digits indicate the direction the true wind is blowing from, in tens of degrees.
What does G26KT mean in a wind group?
Gusts are present, with the peak gust reaching 26 knots.
What does VRB mean in a wind group?
Variable wind direction.
How is prevailing visibility reported in a METAR?
In statute miles, followed by SM.
What is RVR?
Runway visual range—the distance a pilot can see down the runway in a moving aircraft.
In a METAR, what does BKN008 mean?
Broken cloud coverage with bases at 800 feet AGL.
In a METAR, what does OVC012CB mean?
Overcast at 1,200 feet with cumulonimbus clouds.
How are temperature and dew point reported in a METAR?
In degrees Celsius; temperatures below 0°C are preceded by M.
What does an altimeter group such as A2970 mean?
An altimeter setting of 29.70 inches of mercury.
What is a TAF?
A forecast for a five-statute-mile radius around an airport, usually issued for larger airports.
How long is a TAF generally valid?
24 or 30 hours.
How often are scheduled TAFs issued?
Four times a day: 0000Z, 0600Z, 1200Z, and 1800Z.
What does FM mean in a TAF?
A rapid and significant change, usually expected within an hour.
What does TEMPO mean in a TAF?
Temporary fluctuations in weather expected to last less than one hour.
What does PROB30 mean in a TAF?
A 30-percent probability of thunderstorms and precipitation during the specified period.
When are Convective SIGMETs issued according to the guide?
For severe thunderstorms with surface winds greater than 50 knots, hail at the surface at least 3/4 inch in diameter, tornadoes, or certain widespread/embedded thunderstorm conditions.
What is density altitude?
The altitude in the standard atmosphere corresponding to a particular value of air density.
How does increased air density affect aircraft performance?
Performance increases.
What conditions tend to produce high density altitude?
High elevation, low atmospheric pressure, high temperature, high humidity, or combinations of these.
How does high humidity affect density altitude and performance?
Moist air is less dense, increasing density altitude and decreasing performance.
What is the standard sea-level pressure?
29.92 inches of mercury, or 1,013.2 mb.
What is the standard sea-level temperature?
59°F (15°C).
How do ground obstructions affect wind?
They can break up airflow and create rapidly changing gusts in speed and direction.
What is wind shear?
A sudden, drastic change in wind speed and/or direction over a very small area.
Why is low-level wind shear especially hazardous?
Because the aircraft is close to the ground.
What is a microburst?
A severe form of low-level wind shear associated with convective precipitation into dry air at cloud base.
What is the typical horizontal diameter of a microburst?
About 1-2 miles.
What is the typical lifespan of a microburst?
About 5-15 minutes.
What can a microburst's downdrafts reach according to the guide?
Up to about 6,000 feet per minute.
What characterizes a stable atmosphere?
It resists vertical motion and tends to dampen small vertical disturbances.
What characterizes an unstable atmosphere?
Small vertical air movements tend to grow, producing turbulence, convective activity, and potentially severe weather.
What is a temperature inversion?
A condition in which air temperature increases with altitude.
What can an inversion trap near the ground?
Weather and pollutants; with high humidity it can contribute to clouds, fog, haze, or smoke and reduced visibility.
What is dew point?
The temperature at which air can hold no more moisture; cooling to the dew point produces saturation and condensation.
What happens when temperature reaches the dew point?
Air becomes saturated and moisture begins to condense into forms such as fog, dew, frost, clouds, rain, or snow.
Why is frost a flight-safety hazard?
It disrupts airflow over the wing, reduces lift, and increases drag.
What is the most dangerous cloud type discussed in the guide?
Cumulonimbus (CB).
What is the effect of excessive aircraft weight?
It reduces performance, including higher takeoff/landing speeds, longer takeoff/landing runs, reduced climb performance, lower maximum altitude, shorter range, reduced cruise speed, and reduced maneuverability.
What happens if the center of gravity is outside approved limits?
Control difficulty can result.
What is center of gravity (CG)?
The point at which the aircraft's weight may be considered concentrated; its location depends on weight distribution.
What is center of pressure (CP)?
The point associated with the aerodynamic forces of lift.
What is stability?
The inherent quality of an aircraft to correct disturbances to equilibrium and return to or continue on its original flight path.
What is controllability?
The capability of an aircraft to respond to the pilot's control, especially regarding flight path and attitude.
What is a load factor?
The force/stress imposed on an aircraft structure when its flight path is deflected from a straight line, expressed in Gs.
What does a 3-G load factor mean?
The total load on the aircraft's structure is three times its weight.
How does increased load factor affect stall speed?
It increases stall speed; stall speed varies with the square root of the load factor.
What is an inflight emergency under the guide's discussion?
An unexpected or unforeseen event that can have serious consequences for an unprepared remote pilot.
What may a remote pilot do during an emergency?
The pilot may deviate from any part of 14 CFR part 107 as necessary to respond to the emergency.
When must an emergency deviation be reported to the FAA?
When the FAA (the Administrator) asks the remote pilot to report it.
What must be done before every flight?
Conduct a preflight inspection of the small UA.
What happens if irregularities are found during the preflight inspection?
They must be corrected before the small UA is operated.
Who should be briefed on planned emergency procedures when crew members are used?
All required crew members, including visual observers and non-certificated persons permitted to manipulate flight controls.
What is Crew Resource Management (CRM)?
The study guide directs remote pilots to the ADM chapter for CRM; it is part of using available people and resources effectively for safe operations.
Are small UA pilots expected to communicate over aviation radio frequencies?
No. The guide says they are not expected to communicate over radio frequencies, but they should understand aviation language and communications.
What is the ICAO phonetic alphabet used for?
To identify aircraft and support clear radio communications.
What is CTAF?
Common Traffic Advisory Frequency, used for airport advisory practices at airports without an operating control tower.