1/223
Looks like no tags are added yet.
Lock Out Tag Out (LOTO)
1. Protects you from Electricity
2. Isolated - isolates you from the power souse to keep it out/off and you safe
10 seconds
A generator MUST kick up within ______
277
____ is NEVER line-to-line voltage
romex
is most common in residential
kVA
Transformers are measured in what units?
RMC, EMT, PVC
Which conduits have NO wire?
MC Cable
Which conduits have wire?
Conductor
____ is a material that allows electrons to easily move from atom to atom. Ex. silver, copper, gold, aluminum, iron
Insulator
_____ is a material that does not allow electrons to easily move from atom to atom. Ex. Glass, rubber, plastic, or paper
Phases
_____ Refers to the number of "hot" wires in a system
Transformers
_____ uses electromagnetism to step-up or step-down AC voltage from one level to another
Grounding
protects the occupants by providing a safe pathway for unwanted electricity that might create a hazard
System Ground
_______ protects the entire distribution system of a residence
Equipment Ground
____ protects individual components connected to an electrical system
GCFI (ground fault circuit interrupters)
_____ detects low level of leakage current to ground and open the circuit in response
GCFI (ground fault circuit interrupters)
Located in bathrooms, kitchens, near pools, fountains, and garages. designed to detects leakages of current
Transformer
What electrical equipment is this?

Weather Head
What electrical equipment is this?

Disconnect
The purpose of a _______ is to shut off power
AC (Alternating Current)
Type of current used in buildings
PVC Conduit
What does this picture show?

PVC Conduit
______ is used primarily underground because it holds up to corrosion and decay better
RC
Once PVC conduit is above ground it transitions into _____
RMC (Rigid Metal Conduit)
What type of conduit is this?

RMC (Rigid Metallic Conduit)
What type of conduit is this?

EMT (Electrical Metallic Tubing)
What type of conduit is this?

EMT (Electrical Metallic Tubing)
_______ is used into of the building, has the thinnest walls, and uses set screw or compression fittings
RMC (Rigid Metallic Conduit)
_______ Has the thickest wall, used outside of the building, and has threaded connections
Set Screw Fitting
What type of fitting is this?

Compression
What type of fitting is this?

Line Box
A ______ is a pull point that you can pull a wire through and then open up a plate and push the wire through so you do not have to cut or twist the wire
MCB (Main circuit breaker)
What type of breaker is this?

Feeders
_____ are the wires and conduits that lead up to the panel
Branches
_______ leads the power away from the panel
MCB (Main Circuit breaker)
a panel with a _____ has one main breaker where all the power goes through which can kill power to all branches connected at once
MLO (Main Lug Only)
a panel with a ______ does not have a main circuit break and every switch must be flipped to stop power
MLO (Main lug only)
What type of breaker is this?

120/240
What is the voltage of this breaker?

120-208
What is the voltage of this breaker?

MC Cable
What type of conduit is this?

Romex
What type of conduit is this?

Dedicated Space above and below equipment
What NEC rule is this?

3 feet in front of panel/equipment
What NEC Rule is this?

6 foot 7 is max height of switch in on position
What NEC rule is this?

ATS (Automatic Transfer Switch)
_____ runs from utility power to emergency power and tells the generator to turn on
90 minutes
Generators must be able to run ______ of back up power
110
Overall there are _____ points that can be earned towards LEED accreditation
Ensures
LEED certification _______ electricity savings, lower carbon emissions, and healthier environments
certified, silver, gold, platinum
The LEED rating system has four awards
40 points
LEED accreditation start when a building earns _____ points
Pre-requisites
Before credits can be awards all _____ must be fulfilled.
Vacancy/occupancy sensors
What is a way to automatically energy usage?
VAV or VRF systems
How would you provide increased comfort?
Mechanical TAB
How would you increase commission?
Conductor
material that has very little resistance and permits electrons to move through it easily
Insulator
any material that has a very high resistance and resists the flow of electrons
Generated electricity
the alternating current (AC) created by power plant generator
Three phase
three distinct wave cycles, 3-wires, 415V
Single phase
power supply has one distinct wave cycle, single wire, 230V
Service panel
is an electrical device containing fuses or circuit breakers for protecting the individual circuits of a residence and serves as a means of disconnecting the entire residence from the distribution system
Circuit
a complete path (when on) for current to take and includes electrical control devices, circuit protection, conductors, and load(s)
System ground
is a special circuit designed to protect the entire distribution system of a residence
Equipment ground
is a circuit designed to protect individual components connected to an electrical system
2 methods for grounding an electrical system
metal water pipe and alternative electrode
Electrode
is a long metal rod used to make contact with the earth for grounding purposes
Fuse
an electric overcurrent protection device used to limit the rate of current flow in a circuit
Circuit breaker
is an overcurrent protection device with a mechanical mechanism that may manually or automatically open a circuit when an overload condition or short circuit occur
Ground Fault Circuit Interrupter (GFCI)
a fast-acting receptacle that detects low levels of leakage current to ground and opens the circuit in response to the leakage
LOTO
Lockout/Tagout
National Electrical Code (NEC)
is a book of electrical standards that indicate how electrical systems must be installed and how work must be performed. Standards for residential, commercial, and industrial electrical work
National Fire Protection Association: NFPA 70E
standard for electrical safety in a workplace, addresses electrical safety requirements for employee workplaces that are necessary for safeguarding employees in pursuit of gainful employment
Potential energy
is stored energy a body has due to its position, chemical state, or condition
Kinetic energy
energy of motion (released potential energy)
Voltage (AC only)
is the amount of electrical pressure in a circuit. Produced any time there is an excess of electrons at one terminal and deficiency in an other, the greater the difference = higher voltage
DC voltage
voltage that flows in 1 direction only (portable equipment)
AC voltage
voltage that reverses its direction of flow at regular intervals (res,com,indust lighting and power distribution systems)
Rectifier
a device that converts AC to DC by allowing the voltage and current to move in only one direction
Single
(AC) contains only one alternating voltage waveform
Three
(AC) a combination of three alternating voltage waveforms, each displace 120 electrical degrees apart
Current
the amount of electrons flowing through an electrical circuit (amperes)
Ampere/amp
the number of electrons passing a given point in 1 second
Conventional current flow
current flow from + to -
Electron current flow
flow from - to +
Power (P)
the rate of doing work or using energy
True power (PT)
the actual power used in electrical circuit (watts, W)
Apparent power (PA)
the product of voltage and current in a circuit calculated without considering the phase shift that may be present between the voltage and current in the circuit (Volt amps, VA)
Resistive circuit
a circuit that contains only resistive components, such as heating elements and incandescent lamps
In
phase - the state when voltage and current reach their mac amplitude and zero level simultaneously
Inductance
the property of a circuit that causes it to oppose a change in current due to energy stored in a magnetic field
Capacitance
is the ability of a component or circuit to store energy in the form of an electrical charge
Power factor (PF)
the ratio of true power used in an AC circuit to apparent power delivered to the circuit (PF=PT/PA x 100)
Conductor materials
material that has very little resistance and permits electrons to move through it easily
Insulator materials
is a material that has a very high resistance an resists the flow of electrons (rubber, plastic, air, glass, and paper)
Converting celsius to fahrenheit
F=(1.8xC)+32
Electrical energy calculations (kWh)
E=PxT
Power formula
is the relationship between Power, Voltage, and Current in an electrical circuit P=ExI
Electrical circuit
an assembly of conductors (wires), electrical devices (switches and receptacles), and components (lights and motors) through which current flows
Manually controlled circuit
is any circuit that requires a person ti initiate an action for the circuit to operate
Component plan
a group of schedules that state the required locations for receptacles, lights, and switches according to the NEC and local codes
Wiring plan
a drawing that indicates the placement of all electrical devices and components and the wiring required to connect all the equipment into circuits