1/113
Looks like no tags are added yet.
Saturated solution
Solution in which the solute is in equilibrium with the solid phase (undissolved solute).
Unsaturated (subsaturated) solution
Solution in which the dissolved solute is below the concentration needed for saturation at a definite temperature.
Supersaturated solution
Solution that contains more dissolved solute than normally possible at that temperature (when undissolved solute is present).
Very soluble
Descriptive term for < 1 part of solvent needed for 1 part of solute.
Freely soluble
Descriptive term for 1-10 parts of solvent needed for 1 part of solute.
Soluble
Descriptive term for 10-30 parts of solvent needed for 1 part of solute.
Sparingly soluble
Descriptive term for 30-100 parts of solvent needed for 1 part of solute.
Slightly soluble
Descriptive term for 100-1,000 parts of solvent needed for 1 part of solute.
Very slightly soluble
Descriptive term for 1,000-10,000 parts of solvent needed for 1 part of solute.
Practically insoluble / insoluble
Descriptive term for > 10,000 parts of solvent needed for 1 part of solute.
Temperature
Factor of solubility that involves the heat of solution.
Positive heat of solution
Heat of solution that is endothermic, where energy is absorbed to break the crystal lattice.
Solubility increases
The effect of increasing temperature on solubility when the heat of solution is positive.
Negative heat of solution
Heat of solution that is exothermic, where heat is released as the solute dissolves.
Solubility decreases
The effect of increasing temperature on solubility when the heat of solution is negative.
Polarity and hydrogen bonding (chemical structure)
Factor of solubility that works through dipole moment, dielectric properties, and H-bonding.
Dipole
Concentration of positive charge at one end and negative at the other (polar).
More soluble in polar solvents
The effect of a high dipole moment on solubility.
Dielectric constant
Ability to store charge; higher in water than in alcohol.
OH, NH, SH groups
Groups that can H-bond and are attracted to water.
Particle size
Factor of solubility wherein a micronized drug may be more soluble than a non-micronized one, if the process breaks down the crystal lattice.
Less energy is needed to separate the solute from itself
Why micronization can increase solubility.
pH
Factor of solubility that affects weak acids and weak bases through ionization.
Phenobarbital
Weak acid example that is soluble in the alkaline range (ionic form).
pH 9.3
The pH below which phenobarbital precipitates as the molecular form.
Atropine
Weak base example that begins to precipitate as pH is elevated.
Cosolvency
Condition in which a solute is more soluble in a mixture of solvents than in one alone.
Water-alcohol-glycerin
Example of cosolvency: phenobarbital dissolved in this mixture.
Increases solubility (by adjusting polarity)
The effect of adding alcohol to a buffered aqueous solution of a weak electrolyte on the solubility of the unionized species.
Decreases dissociation; pKa increases
The effect of alcohol on dissociation and pKa, since it is less polar than water.
Lowers solubility
The effect of alcohol on the solubility of the ionized drug.
Like dissolves like
The general rule of solubility that says solutes dissolve in solvents of similar nature.
OH, NH₂, SO₃H, COOH
Groups with the capacity to H-bond that increase water solubility.
Less water soluble
The effect of more carbon atoms in the solute on water solubility.
Lower water solubility
The effect of a higher melting point on water solubility.
Cis isomer
The isomer that is more soluble: cis or trans.
Anhydrous
The form of solute that is more soluble: anhydrous or crystal hydrate.
High lipophilicity and strong intermolecular interactions
Causes of poor aqueous solubility.
Only the dissolved drug can be absorbed
Why dose and potency depend on solubility.
Micromeritics
The science and technology of small particles.
Polydisperse system
System that is a collection of particles of more than one size.
(1) Shape and surface area of individual particles; (2) size range and number or weight of particles
What a polydisperse system is described by.
Monodisperse system
System with particles of approximately uniform size.
Diagnostic tests, particle size standards, pore size determination of filters
Uses of monodisperse systems.
Immunization
Other uses of monodisperse systems: surfaces coated with antigens for this purpose.
Liposomes, nanoparticles, microemulsions
Use of monodisperse systems for calibration/QC of submicron products.
Optical microscopy
Method of particle size determination using an ordinary microscope (0.2-100 µm).
0.2-100 µm
The size range measured by optical microscopy.
Agglomeration and multicomponent particles
What optical microscopy can detect.
Gives only 2 dimensions (length, breadth), not thickness
The limitation of optical microscopy.
Sieving
Method that uses standard sieves to grade coarse particles.
44 µm (No. 325)
The fine size that can be graded by sieving.
Sieve loading, duration and intensity of agitation
Sources of error in sieving.
Attrition
The disadvantage of sieving.
Sedimentation
Method of particle size determination using gravity and Stokes' law.
Andreasen pipet
The pipet used in sedimentation.
Particle volume measurement (Coulter counter)
Method that measures particle volume, counting about 4000 particles per second.
Coulter counter
The instrument that gives counts and size distributions quickly.
Sieving, light scattering, sedimentation
Methods that determine average particle size by weight.
Light scattering, electronic sensing zone, light obstruction, air permeation, optical microscopy
Methods that determine average particle size by volume.
Very coarse
Vegetable/animal drug powder where all pass through No. 8 and not more than 20% through sieve 60.
Coarse
Vegetable/animal drug powder where all pass through No. 20 and not more than 40% through sieve 60.
Moderately coarse
Vegetable/animal drug powder where all pass through No. 40 and not more than 40% through sieve 80.
Fine
Vegetable/animal drug powder where all pass through No. 60 and not more than 40% through sieve 100.
Very fine
Vegetable/animal drug powder where all pass through No. 80, with no limit.
Coarse
Chemical drug powder where all pass through No. 20 and not more than 40% through sieve 60.
Moderately coarse
Chemical drug powder where all pass through No. 40 and not more than 60% through sieve 60.
Fine
Chemical drug powder where all pass through No. 80, with no limit.
Very fine
Chemical drug powder where all pass through No. 120, with no limit.
Sphere
Particle shape that affects the flow and packing of a powder.
Determined by particle shape; affects adsorption and dissolution rate
What surface area is determined by, and what it affects.
Specific surface
Surface area per unit volume or per unit weight.
Powders with large surface area
Type of powders that are good adsorbents.
Quantasorb
The method for measuring surface area by adsorption.
Fisher subsieve sizer
The method for measuring surface area by air permeability.
Porosity (voids)
Ratio of void volume (volume of spaces) to bulk volume (volume occupied) of the packing.
εtotal = (Vb - Vp)/Vb
Equation for total porosity.
εintraparticle = (Vg - Vp)/Vg
Equation for intraparticle porosity.
εinterspace = (Vb - Vg)/Vb
Equation for interspace porosity.
Bulk volume
The meaning of Vb.
Granule volume
The meaning of Vg.
True volume of the particles
The meaning of Vp.
Cubic
Packing arrangement that is the loosest, with a 90° angle.
47-48%
Porosity of cubic packing.
Rhombohedral
Packing arrangement that is the closest, with 60° and 120° angles.
26%
Porosity of rhombohedral packing.
True density
Density of the actual solid, exclusive of voids and intraparticle pores.
Granule density
Density of powder particles together with their intraparticle pores.
Bulk density
Density from the bulk volume and weight of a dry powder.
Bulkiness (bulk)
Specific bulk volume, the reciprocal of bulk density.
Packaging powders
Why bulkiness is important.
Bulkiness increases
The effect of decreasing particle size on bulkiness.
Plastic flow and dilatant flow
The types of flow shown by powders.
250-2000 µm
Particle size range (250-2000 µm) that is free flowing.
75-250 µm
Particle size range (75-250 µm) that flows freely or causes problems depending on shape.
< 10 µm
Particle size at which powders do not flow freely.
Spherical
The particle shape that flows better: spherical or needle-shaped.
Elongated or flat particles
Particle shapes that pack and give high porosity.
High density, low porosity
The porosity and density combination that is free flowing.
Poor flow
The effect of surface roughness on flow.