1/260
Looks like no tags are added yet.
phototrophs
Obtain energy from sunlight.
chemotrophs
Obtain energy from chemical compounds.
what is the role of carbon?
It is what organisms use to build organic molecules
autotrophs
Obtain carbon by fixing inorganic carbon, such as CO₂
heterotrophs
Obtain carbon from organic compounds
photoautotrophs
Get energy from sunlight and carbon from CO₂. (Example: Plants)
Chemoheterotrophs
Get both energy and carbon from organic chemicals. (Example: Humans). Animals are chemoheterotrophs because they obtain energy and nutrients by eating other organisms.
chemoautotrophs
Get energy from inorganic chemical compounds and carbon from CO₂.
photoheterotrophs
Get energy from sunlight but carbon from organic compounds.
what are essential nutrients
Cannot be made entirely by an organism AND must be obtained from another source.
what are macronutrients
- required in large amounts
- CHONPS: Carbon, Hydrogen, Oxygen, Nitrogen, Phosphorus, and Sulfur.
- also potassium
what are micronutrients
- Required in very small or trace amounts.
- Examples: Iron, Zinc, Copper, and Manganese.
why is carbon an important nutrient?
Main building block of carbohydrates, proteins, lipids, and nucleic acids. Used to make glucose, which can be used to construct cellulose in plant cell walls.
why is nitrogen an important nutrient?
Needed to make proteins and nucleic acids, and some vitamins.
why are hydrogen and oxygen important nutrients?
Found in water and organic molecules.
why is phosphorus an important nutrient?
Needed for DNA, RNA, ATP, and cell membranes (phospholipids).
why is sulfur an important nutrient?
Found in certain amino acids and vitamins.
why is iron an important nutrient?
Helps enzymes function and supports electron transport. necessary for cytochromes involved in electron-transport reactions.
simple diffusion
- Movement of molecules from an area of high concentration to low concentration.
- Does not require energy (ATP).
- Molecules move down their concentration gradient.
- gas or liquid medium transported
- ions can't pass through plasma membrane since they're repelled by hydrophobic tails
facilitated diffusion
- Diffusion that occurs through a protein channel embedded in the cell membrane.
- Does not require energy.
- Allows molecules that are too large or too polar to cross the nonpolar cell membrane to pass through.
- Each protein channel is specific to particular molecules.
active transport
- Movement of molecules using energy.
- Typically moves molecules against their concentration gradient.
- Always requires energy, often from ATP.
ion channels
- Protein channels in cell membranes that allow specific ions to pass through.
- In plant roots, cation channels allow positively charged nutrients to enter root hair cells down their electrochemical gradient.
proton pumps
- Protein complexes that use ATP to pump H⁺ ions across a membrane.
- Create an electrochemical gradient with a high concentration of positively charged protons on one side of the membrane.
- Pumps H⁺ against its electrochemical gradient
- This gradient stores energy that can be used to transport other molecules through co-transporters.
co-transport
- Movement of two molecules at the same time.
- One molecule moves down its concentration gradient, releasing energy.
- That energy is used to move another molecule against its concentration gradient.
- Occurs through a specific protein channel
Beneficial nutrients
Nutrients that stimulate growth and development but are not required and/or can be substituted by another nutrient.
Why is potassium an important macronutrient in plants?
Helps regulate stomatal opening and closing, supporting water balance.
what are the 3 limiting nutrients for plants?
Nitrogen, phosphorus, and potassium.
- Nitrogen is abundant in the atmosphere, but plants cannot directly use atmospheric N₂ because of its stable triple bond.
- Phosphorus is often unavailable because its bioavailable form is present in small quantities and can become fixed.
- Potassium can be present at low concentrations in certain soils.
What are the major organic sources that animals gain nutrients from?
- Carbs: Primary organic carbon source for herbivores and omnivores.
- Proteins: Dietary source of nitrogen and sulfur; also carbon for carnivores.
- Fats: Provide chemical energy, help absorb fat-soluble vitamins, and support production of fat-soluble hormones.
Four classes of essential nutrients in animals
1. Essential amino acids: Needed as building blocks for proteins.
- Humans obtain them from dietary protein.
- Vegetarians and vegans must consume sufficient grain and legume protein sources.
2. Essential fatty acids: Needed as building blocks for fats and signaling molecules.
- Humans have two essential fatty acids.
3. Vitamins: Organic compounds needed in small amounts.
- Water-soluble: Vitamin C, which is easily excreted in urine.
- Fat-soluble: Vitamin D, which can accumulate in adipose tissue.
4. Minerals: Inorganic nutrients needed in small amounts, such as calcium, phosphorus, sulfur, potassium, sodium, and iron.
nutrient deficiency
- Not enough of a particular nutrient to support its biological functions.
- Impaired growth and biological processes.
nutrient excess
- Too much of a particular nutrient.
- Can become toxic to certain tissues or cell types.
what are three factors that influence how efficiently organisms acquire nutrients?
surface area, distance, concentration gradients
why are concentration gradients important in the process of nutrient acquisition?
- Molecules naturally move from high concentration to low concentration.
- The larger the concentration difference across a membrane, the faster the rate of diffusion.
EXAMPLES:
- Plants use proton pumps to move H⁺ outside root cells, creating an ionic gradient that helps positively charged nutrients enter the roots.
- In animal digestive tracts, nutrients accumulate inside the intestines during digestion. They then move from the higher concentration in the intestine toward the lower concentration in the bloodstream or surrounding fluid.
why is distance important in the process of nutrient acquisition?
- The longer the distance a molecule must travel, the slower the rate of diffusion.
Examples:
1. Cnidarians (such as jellyfish):
- Have bodies composed of only 2 thin tissue layers.
- Nutrients absorbed from the digestive cavity can diffuse throughout the body.
2. Animals with circulatory systems:
- Capillaries are located immediately next to the nutrient absorption surface in the digestive tract.
- This minimizes the distance nutrients must travel to enter the bloodstream.
why is surface area important in the process of nutrient acquisition?
A larger surface area allows more nutrients to be absorbed.
Examples:
1. Plant roots:
- Microscopic root hairs increase the surface area available for absorbing water and nutrients.
2. Mammalian small intestine:
- The intestinal lining contains many folds.
- Each fold contains micro-projections called microvilli.
- These increase the total surface area available for nutrient absorption.
what are the types of weathering that form rock?
- Mechanical weathering: Physical breakdown of rocks.
- Chemical weathering: Chemical changes that break down rocks.
- Biological weathering: Organisms, such as plant roots and microorganisms, help break down rock.
five factors that influence soil formation
- Parent material: Original organic and inorganic material, such as bedrock, sand, or river sediment.
- climate: Temperature, moisture, and wind affect weathering and biological activity.
- topography: Surface features influence water runoff, erosion, and soil fertility.
- biological factors: Animals, microorganisms, and plant roots create pores, break down material, and contribute organic matter.
- time: Soil develops gradually as materials are deposited, decomposed, and transformed.
what components make up soil?
inorganic minerals (45%), water (25%), air (25%), organic matter (5%; includes humus, plant roots, microorganisms, and decomposing organisms)
describe clay particles
- Have a negative charge.
- Attract and bind positively charged ions (cations).
- Prevent cations from being washed away by rain.
- However, tightly bound cations are difficult for plant roots to absorb.
- Negatively charged ions (anions) dissolve easily in soil water and are accessible to roots, but they can also be washed away easily.
***This creates a trade-off: clay retains cations but makes them harder for plants to absorb***
describe sand
- water availability is low since water drains out
- nutrient availability is low since poor capacity for cation exchange; anions leach out
- oxygen availability is high since there's many air-containing spaces
- root penetration ability is high since large particles do not pack tightly
describe clay
- water availability is high since water clings to charged surface of clay particles
- nutrient availability is high since large capacity for cation exchange; anions remain in solution
- oxygen availability is low since there's few air-containing spaces
- root penetration ability is low since small particles pack tightly
describe organic matter
- water availability is high since water clings to charged surface of clay particles
- nutrient availability is high since it's a ready source of nutrients; large capacity for cation exchange; anions remain in solution
- oxygen availability is high since there's many air-containing spaces
- root penetration ability is high since large particles do not pack tightly
how do proton pumps (H+-ATPases) allow plants to absorb nutrients from soil?
- Located in root hair membranes.
- Use ATP to pump hydrogen ions (H⁺) out of root hair cells and into the soil.
- Pump H⁺ against its electrochemical gradient.
- Create a high concentration of H⁺ and positive charge outside the cell and a relatively negative environment inside.
how do cation channels allow plants to absorb nutrients from soil?
- H⁺ ions bind to negatively charged clay particles, displacing positively charged cations through cation exchange.
- The released cations then move into root hairs through cation channels.
- This movement occurs down their electrochemical gradient, so it is passive.
how do anion cotransporters allow plants to absorb nutrients from soil?
- H⁺ accumulates outside the root hair, creating an electrochemical gradient.
- H⁺ naturally moves back into the root hair down its gradient.
- Plants use the energy released by this movement to transport anions into root hairs against their concentration gradient.
- This occurs through anion cotransporter channels.
How do plant roots acquire ions
1. Proton pumps use ATP. H⁺ ions are pumped out of root hair cells into the soil.
2. Cation exchange occurs. H⁺ binds to negatively charged clay, releasing positively charged cations.
3. Cations enter the root and move through cation channels down their electrochemical gradient.
4. H⁺ moves back into the root. H⁺ moves down its electrochemical gradient, releasing energy.
5. Anions enter the root. Anion cotransporters use the energy from H⁺ movement to transport anions against their concentration gradient.
plant adaptations that allow for nutrient acquisition
mycorrhizal fungi, legumes and Rhizobia bacteria, carnivorous plants
describe mycorrhizal fungi as an important plant adaptation that allows for nutrient acquisition
- Fungi colonize living plant root tissue.
- Ectomycorrhizal fungi: Hyphae wrap around root epidermal cells.
- Endomycorrhizal fungi: Hyphae penetrate root cell walls but do not penetrate cell membranes.
- Fungi decompose dead organic matter and make nitrogen, phosphate, & minerals available to plants.
- Fungal hyphae increase the surface area of the root system.
- They can also act as a physical barrier against plant pathogens.
- In return, fungi receive sugars and other nutrients from the plant.
describe legumes and Rhizobia bacteria as an important plant adaptation that allows for nutrient acquisition
- Legumes, such as beans, peas, soybeans, peanuts, and lentils, form mutualistic relationships with bacteria called Rhizobia.
- Rhizobia live in root nodules.
- These bacteria perform biological nitrogen fixation, converting atmospheric nitrogen (N₂) into ammonia (NH₃).
- They use an enzyme called nitrogenase to convert nitrogen into ammonia.
- Nitrogenase is inactivated by oxygen.
- The plant produces leghemoglobin, which binds oxygen and maintains a low-oxygen environment to protect nitrogenase.
- in return, the bacteria receive carbon compounds produced through photosynthesis and a protected environment inside root nodules
- Improves soil nitrogen fertility
describe carnivorous plants as an important plant adaptation that allows for nutrient acquisition
- have specialized leaves that trap and digest insects or small vertebrates.
- They typically live in nutrient-poor soils.
- they are still autotrophs since they still obtain carbon through photosynthesis
- They digest prey using fluids and enzymes, then absorb nutrients through their leaves.
- This allows them to obtain nutrients such as nitrogen, phosphorus, and potassium.
symptoms of plant nutrient deficiency
- Stunted growth.
- Slow growth.
- Chlorosis (yellowing of leaves).
- Cell death in extreme deficiencies.
***location of symptoms depends on whether the nutrient is mobile or immobile within plant tissues***
immobile nutrients
- Cannot be moved from existing tissues to new tissues.
- New leaves show deficiency symptoms.
mobile nutrients
- Can be moved from older tissues to newer tissues.
- Older leaves show deficiency symptoms because nutrients are relocated to new growth.
Two absorptive tissues have identical permeability. Tissue A has twice B's surface area,
half its diffusion distance, and one-quarter its nutrient concentration gradient. How do
their total passive absorption rates compare?
A. A absorbs twice as fast.
B. A absorbs half as fast.
C. A and B absorb at equal rates.
D. A absorbs four times as fast
Two soils contain equal total potassium. Soil A is clay-rich; Soil B is sandy. After heavy
rainfall, Soil A retains more potassium but its plants absorb less potassium initially.
Which explanation best accounts for both observations?
A. Clay increases potassium leaching while preventing diffusion.
B. Clay binds K⁺ electrostatically, reducing both leaching and immediate availability.
C. Sand binds K⁺ more strongly but provides greater root surface area.
D. Clay converts K⁺ into an insoluble anion.
B is correct.
- Prevents Leaching: Because clay particles hold onto K⁺ ions, heavy rainwater cannot easily wash the nutrients away out of the root zone.
- Reduces Initial Availability: Plants can only absorb nutrients dissolved in soil water. Because the K⁺ is tightly bound to clay rather than floating freely in water, roots absorb it more slowly at first.
- A is incorrect: Clay decreases leaching rather than increasing it.
- C is incorrect: Sand particles have almost no electrical charge, meaning they bind K⁺ very weakly and lose nutrients easily to rainwater.
- D is incorrect: Potassium remains a positively charged ion (K⁺) in soil and does not turn into a negatively charged anion.
A mutation disables root H⁺-ATPases but leaves cation channels and H⁺/anion
cotransporters functional. Which outcome is most likely?
A. Cation uptake increases, while anion uptake remains unchanged.
B. Anion uptake declines, but cation uptake necessarily remains normal.
C. Both cation exchange from clay and H⁺-driven anion uptake are impaired.
D. Cation uptake stops, but anions enter by passive diffusion at normal rates.
C is correct.
- Cation Exchange Fails: Plants normally pump H⁺ ions into the soil to displace positively charged minerals (like K⁺ and Ca²⁺) from negatively charged clay particles. Without functioning H⁺-ATPases, H⁺ ions are not released to free these bound cations for absorption.
- Anion Cotransport Stops: H⁺/anion cotransporters rely on a steep proton gradient (high H⁺ outside the cell, low H⁺ inside) to pull negatively charged ions (like NO₃⁻) into the root. Disabling H⁺-ATPases eliminates this proton gradient, halting secondary active transport of anions.
- Membrane Potential Drops: Pumping H⁺ out creates a negative electrical charge inside the root cell that naturally attracts positive cations through cation channels. Without this negative membrane potential, the electrical driving force pulling cations into the root weakens significantly.
what is water potential
- measures the potential energy of water and predicts the direction water will move between two systems.
- measured in megapascals (MPa).
- Pure water has a water potential of 0 MPa.
- Water moves from higher water potential to lower water potential until equilibrium is reached.
- equals solute potential and pressure potential
describe solute potential
- Effect of dissolved solutes
- More solutes decrease water potential; less solutes increase it
- increasing solute concentration lowers solute potential, encouraging water to enter the cell and increasing pressure potential.
describe pressure potential
- Effect of physical pressure
- Positive pressure increases water potential; negative pressure decreases it
How to predict water movement
- More dissolved solutes = lower (more negative) water potential.
- Less dissolved solutes = higher water potential.
- Positive pressure = higher water potential.
- Negative pressure (tension or vacuum) = lower water potential.
Example: Water entering plant root cells
- Plant root cells have a high solute concentration, giving them a negative solute potential.
- If the soil has a higher water potential than the root cells, water moves from the soil into the roots through osmosis.
- As water enters the cells, pressure potential increases, producing turgor pressure.
describe pressure potential in terms of plants
Wilting
- Water moves out of plant cells.
- Pressure potential decreases.
- Cells lose turgor pressure.
Healthy plant
- Water moves into plant cells.
- Pressure potential increases.
- Turgor pressure keeps the plant upright
***increasing solute concentration lowers solute potential, encouraging water to enter the cell and increasing pressure potential***
water potential gradient in plants
Water moves from the soil, through the roots and stems, into the leaves, and finally into the atmosphere because water potential decreases at each stage.
Effect of dry soil and drought
- When soil becomes dry, the same amount of solutes is dissolved in a smaller amount of water.
- This decreases solute potential (makes it more negative) because solutes become more concentrated in the remaining water.
- During severe drought, pressure potential can also decrease because water loss creates negative pressure in the soil.
- If soil water potential becomes lower than root water potential, water moves out of the roots and into the soil instead of entering the plant.
- This can cause water loss from plant cells and wilting.
how do plants respond to wilting from dry soil?
- Plant cells can increase their solute concentration to lower their solute potential.
- This helps draw water into the roots and cells when water is limited.
- Stomatal opening and closing also influences water loss and leaf water potential.
What are the three pathways that water and minerals can take from the root hair to the vascular tissue?
symplast, transmembrane, apoplast
describe the symplast pathway
- Water and minerals move through the cytoplasm of plant cells.
- Neighboring cells are connected by structures called plasmodesmata.
- Water moves from one cell's cytoplasm to another until it reaches the vascular tissue.
describe the transmembrane pathway
- Water moves through water channels in the plasma membranes.
- It passes from one cell to the next by crossing cell membranes repeatedly.
describe the apoplast pathway
- Water and dissolved minerals travel through cell walls and spaces outside the plasma membrane.
- Water does not need to cross a cell membrane as it moves through this pathway (until it reaches the endodermis)
Role of the endodermis and Casparian strip
- The endodermis separates the ground tissue from the vascular tissue (stele) in the root.
- The endodermal cell walls contain a waxy substance called suberin.
- This creates a waxy barrier called the Casparian strip.
- The Casparian strip blocks the apoplastic pathway.
- Water and dissolved substances must cross the plasma membrane of an endodermal cell before entering the vascular tissue.
***The Casparian strip acts as a checkpoint, ensuring that materials entering the vascular system are filtered. It helps prevent toxic substances & pathogens from entering the plant's vascular tissue***
what are the 3 hypotheses that explain water movement in xylem?
root pressure hypothesis, capillary action hypothesis, cohesion-tension hypothesis
describe the root pressure hypothesis
- Water enters the roots from the soil through osmosis because root cells have a lower solute potential.
- This increases pressure potential in the root xylem.
- The positive pressure pushes water upward through the xylem.
- When stomata are closed at night, water may accumulate and be released as droplets through the leaves. This is called guttation.
***Limitation: Root pressure can only move water upward a few meters, so it cannot explain water transport in tall trees***
describe the capillary action hypothesis
- Capillary action is the tendency of water to move upward against gravity when confined in a narrow tube.
- depends on 3 properties of water: surface tension, adhesion, cohesion
- surface tension: Hydrogen bonding between water molecules is stronger at the air-water interface.
- Adhesion: Attraction between unlike molecules, such as water molecules and xylem cell walls.
- Cohesion: Attraction between like molecules, such as water molecules sticking to one another through hydrogen bonding.
***Limitation: Capillary action alone can move water approximately 1 meter upward, which is not enough to explain water movement in tall trees***
describe the cohesion-tension hypothesis
1. Transpiration occurs: Water evaporates from the leaves through open stomata.
2. Negative pressure develops: Evaporation creates tension (negative pressure or suction) in the leaf.
3. Water is pulled upward: This tension pulls water upward through the xylem, similar to sucking water through a straw.
4. Cohesion maintains the water column: Water molecules stick to one another through hydrogen bonding, allowing the upward pull to be transmitted through the water column.
5. Adhesion helps: Water molecules stick to the xylem cell walls, helping support water movement.
- Xylem vessels and tracheids are reinforced with lignin to withstand the large negative pressures involved.
***the most widely accepted explanation for water movement through plant xylem***
transpiration
- evaporation of water from plant stomata, resulting in continuous movement of water through the plant via the xylem, from soil to air, without reaching equilibrium.
- driven by the extreme difference in water potential between the soil and the atmosphere.
- Factors that change this water potential difference can also change the rate of transpiration.
How transpiration works
1. Stomata open to allow gas exchange for photosynthesis.
2. Water evaporates from the leaves and exits through the stomata.
3. Evaporation creates negative pressure (tension) in the leaves.
4. Tension pulls water upward through the xylem.
5. Cohesion between water molecules maintains the continuous water column.
sodium is not an essential nutrient for plants, but is essential for animals. why is this the case?
animals have neurons; plants do not. sodium is an essential ion for neuronal function; it is required to set up an electrochemical gradient for action potentials to occur. plants lack a nervous system and presumably use a different set of ions for any necessary electrochemical gradients in their cell function.
Which of the following is true about clay particles in soil?
A. They are negatively charged and so prevent uptake of cations by roots
B. They are negatively charged and so prevent anions from washing away
C. They are negatively charged and so prevent uptake of anions by roots
D. They are negatively charged and so prevent cations from washing away
A. They are negatively charged and so prevent uptake of cations by roots
D. They are negatively charged and so prevent cations from washing away
Describe the role of proton pumps in absorption of cations by roots. Proton-pumps facilitate two key parts of this process. Be sure to mention each.
- Proton pumps pump protons out of the roots and into the soil. These protons then bind to clay particles and free up cations that were previously bound to the clay to be absorbed into the root.
- Protons also establish a charge gradient of positive charge outside the root compared to inside, allowing cations to flow down this gradient.
- Movement of protons down this gradient is also used through co-transporters to move anions against the charge gradient into the root.
The relationship between Rhizobium bacteria and legumes is mutalistic. The bacteria offers the plant access to organic nitrogen that it fixes, what are 2 things that the Rhizobium bacteria get in return from the plant?
- Sugars from the plant
- Protection from oxygen provided by the root nodule and leghemoglobin from the plant
Where does the mass of a tree come from?
air
Water potential is generally most negative in which of the following parts of a plant?
A. xylem vessels in leaves
B. xylem vessels in roots
C. root hairs
D. mesophyll cells of the leaf
D. mesophyll cells of the leaf
Plants often have specific adaptations to deal with living in salty soils. Explain why salty soils make the flow of water in plants more difficult to achieve.
Salty soils have a higher amount of solutes and so a lower solute potential. This can cause water to flow out of the roots and into the soil if the total water potential direction reverses due to higher solute potential inside the root than outside
How do concentration gradients play a role in nutrient acquisition by both plants and animals?
- Diffusion and facilitated diffusion rely on nutrients moving down concentration gradients.
- Active transport moves nutrients against concentration gradients
- Co-transport uses some molecules flowing down a concentration gradient to move nutrients up concentration gradients
translocation
- Plants transport sugars from areas where they are produced or released to areas where they are needed for growth or storage
- occurs via phloem
what are sources
- Plant structures that produce or release sugars.
EXAMPLES:
- Mature leaves that produce sugars through photosynthesis.
- Stems that actively photosynthesize.
- Storage organs, such as roots, tubers, and bulbs, when they release stored sugars.
what are sinks
- Plant structures that receive sugars for growth or storage.
EXAMPLES
- Apical and lateral meristems.
- Developing leaves.
- Flowers and seeds.
- Fruits.
- Storage organs, such as roots, tubers, and bulbs, when they store sugars.
What are the sources of a plant that is in the middle of the growing season
Mature leaves and photosynthesizing stems (they produce excess sugar)
What are the sinks of a plant that is in the middle of the growing season
Growing meristems, new leaves, flowers, seeds, roots, tubers, and bulbs
What are the sources of a plant that is in the beginning of the next growing season
Stored sugars in roots, tubers, and bulbs
What are the sinks of a plant that is in the beginning of the next growing season
Developing leaves and other growing tissues
purpose of the pressure flow model
- best-supported explanation for how sugars move through phloem tissue.
- explains how differences in pressure between sources and sinks drive the movement of sugar-containing phloem sap
- relies on solute & pressure potentials and water movement
***High pressure at source pushes sap toward sink***
How the Pressure Flow Model works
AT THE SOURCE:
1. Sugar is produced in photosynthesizing leaves and actively loaded into the phloem.
2. The high sugar concentration decreases solute potential (Ψs).
3. This lowers the water potential of the phloem.
4. Water moves from the adjacent xylem into the phloem through osmosis.
5. Water entering the phloem increases pressure potential (Ψp), creating high positive turgor pressure.
DURING TRANSLOCATION:
6. The high pressure at the source pushes phloem sap toward the sink through bulk flow.
7. Sugar and water move together through the sieve-tube elements.
AT THE SINK:
8. Sugar is unloaded from the phloem and delivered to sink tissues for growth or storage.
9. Removing sugar increases solute potential (Ψs), meaning it becomes less negative.
10. Water moves out of the phloem and returns to the xylem through osmosis.
11. This decreases pressure potential (Ψp) at the sink.
***pressure difference between the source and sink maintains bulk flow from source to sink***
Explain the roles of solute potential, pressure potential, and movement of water in the Pressure Flow Model for sugar translocation in phloem tissue
1. A high concentration of sugar at the source creates
a low solute potential, which draws water into the phloem from the xylem
2. Movement of water into the phloem creates a
high pressure potential → this forces movement of
phloem sap from source to sink = "bulk flow"
3. Sugars moved via bulk flow are then rapidly
removed from the phloem at the sink → increases
solute potential and causes water to leave phloem
and return to the xylem, returning pressure potential back to normal
what are some observations supporting the Pressure Flow Model
- Phloem fluid is under high positive pressure.
- Translocation stops if phloem tissue is killed.
- Sugar can move in both directions simultaneously, but not in the same sieve tube.
- Translocation is inhibited by compounds that stop ATP production in the sugar source.
describe the role of proton pumps in the pressure flow model
- Use energy from ATP.
- Pump H⁺ across the plasma membrane.
- Create an electrochemical gradient with a high concentration of protons outside the companion cell.
- This gradient stores energy that can be used to transport sucrose into the cell.
describe the role of proton-sucrose cotransporters in the pressure flow model
- Use the energy released when H⁺ moves down its concentration gradient.
- Transport H⁺ and sucrose into the companion cell at the same time.
- H⁺ moves down its gradient, while sucrose moves against its concentration gradient.
- This is a type of secondary active transport because it uses energy stored in the proton gradient rather than directly using ATP.
describe the role of facilitated diffusion in the pressure flow model
- Once sucrose enters the companion cell, it moves into the sieve-tube element through plasmodesmata.
- Sucrose moves down its concentration gradient.
- This is passive diffusion and does not require ATP.
describe the steps of sugar loading at the source
1. Proton pump uses ATP: Pumps H⁺ out of the companion cell, creating an electrochemical gradient.
2. Proton-sucrose cotransporter: H⁺ moves back into the companion cell down its gradient, bringing sucrose against its gradient.
3. Diffusion through plasmodesmata: Sucrose moves from the companion cell into the sieve-tube element down its concentration gradient.
4. Water enters the phloem: High sugar concentration lowers solute potential, causing water to enter from the xylem.
5. Bulk flow occurs: Increased pressure pushes phloem sap toward the sink.
true or false: the transport pathway used to load sugars at sources or unload sugars at sinks will depend on whether sugar is moving down or against its concentration gradient.
true!
- If sugar moves from high to low concentration, it can move through diffusion.
- If sugar moves from low to high concentration, it requires active transport.
Recognize that the transport pathway used to load sugars at sources or unload sugars at sinks will depend on whether sugar is moving down or against its concentration gradient
Transport from source:
- *Active transport is used to move sugars from source cells → sieve-tube companion cells: uses ATP-powered proton pump and proton-sucrose cotransporter
- *Once inside the companion cells, sugar diffuses down its concentration gradient into phloem sieve-tube elements, then down the phloem via pressure driven bulk flow
Unloading at sink end:
- *sink = area of active growth OR starch storage, concentration of sucrose is low → diffusion into the sink can occur from companion cells → sink
- *sink = area of sucrose storage, concentration of sucrose is higher → may need active transport