Chemical Calculations and Stoichiometry Algorithm Maps

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/21

flashcard set

Earn XP

Description and Tags

Flashcards covering chemical calculation algorithms, stoichiometric conversions, unit transitions, and the four cases of concentration and dilution.

22 Terms

1
New cards

How do you convert the number of particles (NN) of a substance into the amount of substance in moles (nn)?

Multiply the number of particles (NN) by 1NA\frac{1}{N_A} (or divide by Avogadro's constant NAN_A): n=N×1NAn = N \times \frac{1}{N_A}.

2
New cards

For a gas at standard conditions, what conversion factor is used to calculate moles (nn) from volume (VOL\text{VOL} in dm3dm^3)?

Multiply the gas volume by 122.4\frac{1}{22.4}: n=VOL×122.4n = \text{VOL} \times \frac{1}{22.4}.

3
New cards

How is mass (mm in gg) converted into moles (nn) using molar mass (MM)?

Multiply mass by 1M\frac{1}{M} (or divide by molar mass MM): n=m×1Mn = m \times \frac{1}{M}.

4
New cards

How do you convert molar concentration (cc in mol dm−3mol\,dm^{-3}) to mass concentration (cc in g dm−3g\,dm^{-3})?

Multiply molar concentration by the molar mass (MM): c (g dm−3)=c (mol dm−3)×Mc\,(g\,dm^{-3}) = c\,(mol\,dm^{-3}) \times M.

5
New cards

How is mass concentration (cc in g dm−3g\,dm^{-3}) converted to parts per million (ppmppm or mg dm−3mg\,dm^{-3})?

Multiply the mass concentration by 10310^3: ppm=c (g dm−3)×103ppm = c\,(g\,dm^{-3}) \times 10^3.

6
New cards

How do you convert mass concentration (cc in g dm−3g\,dm^{-3}) to density (dd in g dm−3g\,dm^{-3}) using the mass percentage (W/WW/W)?

Multiply the mass concentration by 100W/W\frac{100}{W/W}: d (g dm−3)=c (g dm−3)×100W/Wd\,(g\,dm^{-3}) = c\,(g\,dm^{-3}) \times \frac{100}{W/W}.

7
New cards

How do you convert density from g dm−3g\,dm^{-3} to g cm−3g\,cm^{-3}?

Multiply by 1103\frac{1}{10^3} (or divide by 10310^3): d (g cm−3)=d (g dm−3)×1103d\,(g\,cm^{-3}) = d\,(g\,dm^{-3}) \times \frac{1}{10^3}.

8
New cards

When transitioning between an aqueous ionic compound and its dissociated ions, through which quantities is direct stoichiometric conversion permitted?

Conversion can be performed either between moles and moles (mol↔molmol \leftrightarrow mol) or between molar concentrations (mol dm−3↔mol dm−3mol\,dm^{-3} \leftrightarrow mol\,dm^{-3}) using the stoichiometric ratio.

9
New cards

Why can the concentration (mol dm−3mol\,dm^{-3}) be directly converted between an ionic compound and its dissociated ions, unlike in a reaction between two separate solutions?

Because the compound and its dissociated ions all share the exact same solution volume (VV).

10
New cards

What rule must be followed regarding stoichiometric coefficients when calculating the molar mass (MM) of a species?

Avoid multiplying the molar mass by the stoichiometric coefficient when determining the molar mass value.

11
New cards

In a chemical reaction involving two different reactants, through which quantity must stoichiometric transfers be made?

Transfers must be made exclusively through moles (molmol). They cannot be made directly through concentration (mol dm−3mol\,dm^{-3}).

12
New cards

Why is it impossible to directly transfer between different reactants using their concentrations (mol dm−3mol\,dm^{-3})?

Because the volumes of the two reacting solutions are generally not equal (unless by coincidence).

13
New cards

What fundamental assumption is made regarding solute distribution in a solution in chemistry?

The solute is assumed to be uniformly distributed throughout the solution, meaning the concentration is identical at all points within the solution.

14
New cards

What formula applies when a solution is diluted by adding pure water (Case 2)?

c1V1=c2V2c_1 V_1 = c_2 V_2, where the number of solute moles remains constant (n1=n2n_1 = n_2) and the final volume is V2=V1+VaddedV_2 = V_1 + V_{\text{added}}.

15
New cards

During water dilution of a solution, how does a change in volume affect the concentration?

Concentration decreases by the exact same factor by which the volume increases (e.g., doubling the volume halves the concentration).

16
New cards

When a portion of a solution is poured into a separate, empty container (Case 3), how does the concentration of the new container compare to the original?

The concentration in the new container is identical to the initial concentration of the original container (c1c_1).

17
New cards

When a portion of a solution is transferred to an empty container (Case 3), by what factor do volume and moles change?

Both the volume and the number of moles decrease by the exact same factor.

18
New cards

What relationship gives the final concentration (c3c_3) when two solutions of the same solute are mixed together (Case 4)?

c1V1+c2V2=c3V3c_1 V_1 + c_2 V_2 = c_3 V_3, where the total volume is V3=V1+V2V_3 = V_1 + V_2.

19
New cards

What is always true about the resulting concentration (c3c_3) when mixing two solutions of the same solute with initial concentrations c1c_1 and c2c_2?

The resulting concentration c3c_3 is an intermediate value lying strictly between c1c_1 and c2c_2.

20
New cards

If two solutions of the same solute with concentrations c1c_1 and c2c_2 are mixed in equal volumes (V1=V2V_1 = V_2), what is the new concentration (c3c_3)?

The new concentration is the arithmetic mean of the two initial concentrations: c3=c1+c22c_3 = \frac{c_1 + c_2}{2}.

21
New cards

In the analogy for an acid, base, or salt dissolving in water, what do the 'Family', 'Husband', and 'Wife' represent?

The 'Family' represents the parent acid, base, or salt, while the 'Husband' and 'Wife' represent the two ions produced upon dissociation in water.

22
New cards

In the analogy for a chemical reaction, what are the reactants and products compared to?

The reactants are compared to two opposing armies destroying each other in war, while the products are compared to soldiers being reborn.