1/105
Looks like no tags are added yet.
Psychoacoustics
Study of the relationship between physical sound stimuli & auditory perception
Auditory sensitivity
The minimum stimulus magnitude required to elicit a response
Measured as an absolute threshold
Resolving power
The ability to discriminate differences between auditory stimuli
What are the 2 types of Psychophysics?
Classic
Modern
Classic Psychophysics
Traditional approach in which psychological variables are…
Largely uncontrolled
Subjects may be trained (rather than controlled)
Modern Psychophysics
Based on statistics and mathematical models to account for variables such as motivation and willingness to guess
NOIR
N: Nominal
O: ordinal
I: Interval
R: Ratio
Nominal scale
Categories/names
Measurement scale used for labels/categories without logical or numerical order
The labels just name the items
Ex. eye color, gender, blood type, numbers on a football jersey, telephone #, SSN
Ordinal scale
Ranked categories
Measurement scale indicating rank order without equal intervals
The data has a clear order/rank, but the exact distance between said ranks in unknown/unequal
Rank ordering: race finishing places (1st, 2nd, 3rd place), grades (98%, 89%, 74%%)
The numbers have relationships, but not equal intervals
Interval scale
Ordered by equal intervals, no true zero
Measurement scale with equal intervals but no absolute zero
Ex. temperature, IQ scores
Ratio scale
Ordered with equal intervals, and a true zero
Ex. weight, height, age, income, response time
Sensory capability
What a listener can actually hear
Response proclivity
The manner in which a listener tends to respond
Includes response biases & decision criteria
If you can’t eliminate bias, you have _______ _______.
Response proclivity
Method of Limits
Experimenter controls stimulus intensity in discrete ascending or descending steps
Ascending run
Stimulus begins below threshold and increases until the listener responds
Descending run
Stimulus begins above threshold and decreases until the listener no longer responds
Threshold in method of limits
Midpoint between lowest audible and highest inaudible levels, averaged across runs
Anticipation bias
Listener predicts when a stimulus should become audible or inaudible, altering responses
Step size
Amount of intensity change between stimulus presentations
Smaller steps improve precision but require more time
Method of Adjustment
Listener (subject) controls stimulus intensity to find just audible & just inaudible levels
Constant stimuli: Method
Stimulus levels are presented in random order, with equal presentations at each level
Constant stimuli: Threshold
Intensity detected on 50% of presentations
Constant stimuli: Disadvantage
Requires a large number of trials and prolonged testing time
Catch trial
Trial in which no stimulus is presented, used to estimate guessing or false positive responses
Békésy tracking
Automatic stimulus level changes direction based on the listener pressing or releasing a button
Békésy tracking bias
Listener reaction time can affect excursion width, especially with fast attenuation rates
Up-down staircase method
Intensity increases after no response & decreases after a response
Reversal
Point at which stimulus level changes direction following a change in response
Staircase threshold
Estimated by averaging midpoints after approximately 6-8 reversals
Typical tonal hearing range of humans
Approximately 20 - 20,000 Hz
Approximate intensity range of hearing
Approximately 0 - 140 dB SPL, from threshold to pain
Frequency region of greatest hearing sensitivity (minimal audible curve)
Approximately 2,000 - 5,000 Hz
Minimal Audible Pressure (MAP)
Absolute threshold measured through earphones using sound pressure in the ear canal
Minimal Audible Field (MAF)
Absolute threshold measured in a sound field using loudspeakers
MAF compared with MAP
MAF thresholds are approximately 6 dB lower than MAP thresholds
Reasons for MAP & MAF differences (3)
Ear canal resonance
Enhances pressure of a free field at the eardrum
Binaural advantage (over monaural)
Physiological noise associated with occlusion
Heart beat, breathing (due to the occlusion effect)
How short does a sound have to be to not sound tonal? (how quickly does a sound have to start & stop before your brain stops hearing it as a pitch/tone, and more of a click?)
10 ms
Spectral splatter
Spread of sound energy across frequencies caused by extremely short or abruptly switched stimuli
Temporal integration
Auditory summation of sound energy over time, making longer stimuli easier to detect
Temporal integration limit
Approximately 200 - 300 ms
Longer durations provide little additional threshold improvement
Tenfold duration change
Reducing duration tenfold requires approximately a 10 dB intensity increase to maintain threshold
Difference Limen (DL)
Smallest perceptible difference between two stimuli
Difference Limen aka _____ _______ _______
Just noticeable difference (JND)
Intensity difference limen (ΔI)
Smallest detectable change in sound intensity
Frequency difference limen (ΔF)
Smallest detectable change in frequency
Weber's Law
Relative difference limen remains a constant proportion of the stimulus
ΔI/I = k
Weber fraction
Difference limen divided by the original stimulus magnitude
A smaller difference limen indicates…
Better discrimination
What are different ways to test frequency discrimination? (2)
Beats
Quantal
Reisz intensity discrimination method
Uses beats produced by two nearby frequencies to assess small intensity differences
Optimal beat rate in Reisz experiment
Approximately 3 beats per second
Paired comparison
Listener judges whether two sequentially presented sounds are the same or different
Quantal method
A brief intensity increment is added to an ongoing stimulus
SISI stimulus level & increment
Ongoing tone at 20 dB SL with brief 1 dB increments
Frequency modulation (FM)
Continuous variation in frequency used to assess frequency discrimination
Beats are used with _______
Intensity
2 beats; 1 reference (steady) and 1 changing
What can affect lateralization?
Intensity & timing
Stenger effect
Warble tones are used with _______
Frequency
Goes a little above & below a set frequency
Beat vs. Warble
Beat involves intensity modulation
WA-WA-WA
Warble involves frequency modulation
WO-WO-WO
Has a center frequency
Frequency DL _______ as intensity _______
Decreases; increases
As DL increases, sensitivity gets better
You want DL to be as small as possible
Intensity vs. Loudness
Intensity is a physical stimulus property
Loudness is its psychological perception
What are the units of measurement for loudness? (2)
Phon
Sone
Phon
Unit of loudness level referenced to a 1,000 Hz tone (standard freq)
Used when comparing frequencies & dB
dB SPL
Sone
Unit of perceived loudness magnitude
2x, 3x, 4x
One sone = ___ phons
40 phons, or a 1,000 Hz tone at 40 dB SPL
Doubling perceived loudness
Approximately a 9 dB SPL increase
Equal-loudness contours
Curves showing the SPL needed at different frequencies for tones to sound equally loud
Pitch
The psychological perception of frequency
Mels
Used to measure pitch
If you can hear at 20,000 Hz, how many mels is that?
3,500 mels
1,000 mels
Pitch of a 1,000 Hz tone at 55 dB SPL
Pitch-Frequency relationship
Non-linear
Doubling frequency does not necessarily double perceived pitch
Pitch change with intensity
Increasing intensity lowers pitch below 1,000 Hz, leaves it relatively stable at 1,000-3,000 Hz, and raises it above 3,000 Hz.
Beat frequency
Absolute difference between two tone frequencies
What is masking?
Reduction in the audibility of one sound due to another sound occurring simultaneously or nearby in time
Peripheral masking
Masking associated with interactions at the cochlea
Central masking
Masking caused by interactions in the central auditory nervous system
Threshold changes by ~5 dB
Critical ratio
Measure relating a tone's masked threshold to the spectral level of masking noise (to mask the hearing for any particular frequency, must occupy the ½ mm which is responsive to that tone)
Represents about ½ mm of space on the basilar membrane
An equivalent bandwidth
What would be the critical ratio at 1,000 Hz?
Approximately 63 Hz
Critical band
Frequency region of masking noise that contributes to masking a particular tone
Critical bands are approximately ___ times wider than critical ratios
2.5
Ex. the critical ratio at 1000 Hz is about 63 Hz. The critical band is about 160 Hz.
Forward masking
When an ongoing sound is turned off, it leaves a momentary trace/after-effect
The after-effect will raise the threshold of a stimulus that follows the sound IF IT IS PRESENTED WITHIN 50 ms OF THE OFFSET
So… earlier sound reduces audibility of a later stimulus; with later stimulus is presented within 50 ms
Backward masking
When one stimulus precedes another stimulus, the second stimulus may affect the threshold of the preceding stimulus IF THE TWO STIMULI ARE WITHIN 100 ms OF EACH OTHER
So… later sounds can reduce the audibility of an earlier stimulus
Diotic stimulation
Identical stimuli presented to both ears at the same time
Dichotic stimulation
Different stimuli presented simultaneously to each ear
Monotic stimulation
Stimulus presented to only one ear
Monophonic
One audio channel
Aka… a singular sound channel (a sound has only one channel/source)
Describes the sound signal, rather than which each receives it
The same combined sound can be sent to ONE or BOTH ears… you not able to separate left-ear and right-ear information
Sterophonic
Two audio channels
One channel sends sound to your LEFT ear
Another channel sends sound to your RIGHT ear
The sounds can be different in each ear
Binaural summation
Improvement in auditory sensitivity with two ears; approximately 3 dB threshold advantage
Binaural fusion
Perception of a single unified sound from signals reaching both ears.
Localization
Perception of a sound source's position in external space
Occurs in the sound field (booth)
Lateralization
Perception of a sound's position within the head during earphone listening
Occurs when using headphones
Interaural time difference (ITD)
Difference in sound arrival time between the ears
Especially useful at low frequencies
Interaural intensity difference (IID)
Difference in sound intensity between the ears due largely to head shadow
Especially useful at high frequencies
Stenger effect
Perception of a binaural signal only in the louder ear when interaural intensity differences are sufficient
Masking Level Difference (MLD)
Improvement in tone detection in noise when interaural phase relationships change
Why is MLD important?
It helps us understand how the brain uses BOTH ears to detect sounds in noisy environments
Typical MLD release
Approximately 15 dB
By shifting the phase of either the tone or the masking signal by 180o
With MLD, the best results are obtained by shifting the _______ as opposed to the _______.
Tone; noise