1/4
Looks like no tags are added yet.
FMEA Slide
For our FMEA, we identified potential hazards across the project and assigned each a Risk Priority Number based on severity, probability and detectability.
The highest initial RPNs were mainly concentrated around the drive and power subsystems, particularly the winch motors, microcontroller and wiring, with risks such as motor failure, water damage and short circuits. These were prioritised because failures in these components could directly result in loss of station keeping or loss of control.
We then introduced controls such as waterproof housings, thermal protection, waterproof wiring, secure connections and shielding vulnerable components, which reduced the RPNs significantly.This helped us identify which components needed the greatest attention during the prototype design and testing.
power and control slide
For our power and control subsystem, we used a wireless PS2 controller, an Arduino Uno and an L298N motor driver to operate two 12-volt DC geared motors.
When the user moves the joysticks, the controller sends wireless signals to a receiver connected to the Arduino. The Arduino then processes these inputs and sends commands to the motor driver, which controls the speed and direction of each motor.
This allows both winches to operate independently, winding or unwinding the jute twine to adjust the structure's positioning.
We chose this system because it provides convenient wireless operation, flexible motor control and a relatively simple way to integrate the electrical and mechanical subsystems.
power and control testing slide
For our power and control subsystem, one of the main modifications was switching from wired joysticks to a wireless PS2 controller. This eliminated the need for multiple external control wires, reducing potential safety risks around water while making the system more convenient to operate.
We also integrated an L298N motor driver, allowing us to control the speed and direction of both motors independently. Together, these changes improved the system's usability, safety and overall control of the winches.
Design Philisophy slide
Our design philosophy centred around three key principles: simplicity, practicality and reliability.
Throughout the design process, we aimed to avoid unnecessary complexity, prioritising solutions that were affordable, straightforward to construct and easy to operate. This influenced our choice of lightweight materials, including the XPS base and Corflute structure, which provide buoyancy and stability while keeping costs and overall weight low.
We also recognised the importance of adapting to changing flood conditions. Our dual motor-driven winch system allows us to control the structure's positioning, while the wireless PS2 controller provides convenient operation without physical control cables that could pose a safety risk.
Another key consideration was maintainability and subsystem integration. Features such as the removable roof allow easy access for repairs, while ensuring all three subsystems work together effectively.
Ultimately, our goal wasn't to create the most technologically advanced solution, but a simple, functional and cost-effective design with the potential to be developed into a scalable, real-world flood refuge.
structural subsystem testing
To evaluate the stability of our prototype, we tested it under water flow from two different orientations, with both its short edge and long edge facing the flow. We recorded the tests using photographs and videos to observe its flotation and tilting behaviour.
Our results showed that the structure tilted noticeably when its short edge faced the flow. However, when its long edge faced the flow, it remained afloat without capsizing.
Based on these observations, we increased the XPS base thickness from 60 to 80 millimetres to provide additional reserve buoyancy. This modified design will be evaluated during our final demonstration.