chem c21 polymers

0.0(0)
Studied by 0 people
call kaiCall Kai
learnLearn
examPractice Test
spaced repetitionSpaced Repetition
heart puzzleMatch
flashcardsFlashcards
GameKnowt Play
Card Sorting

1/37

encourage image

There's no tags or description

Looks like no tags are added yet.

38 Terms

1
New cards

What is a polymer?

A macromolecule built up from monomers, with average molar mass of at least 1000or at least 100 repeat units.



2
New cards

What is the difference between a homopolymer and a copolymer?



Homopolymer — constructed from onetype of monomer (e.g. poly(ethene))

Copolymer — constructed from two or more types of monomers (e.g. Saran, ABS)



3
New cards

What is a biopolymer? Give 3 examples.

A polymer found in nature. Examples:

  • Protein (monomer: amino acids) — wool, silk, keratin

  • Starch/Cellulose (monomer: glucose) — plants

  • DNA (monomer: nucleotides) — all living cells



4
New cards

How are addition polymers formed?

Monomers containing a C=C double bond(alkenes) undergo addition polymerisation — the π bond breaks to form two new σ bonds, joining monomers with no small molecule eliminated. The empirical formula of the polymer is the same as its monomer.

5
New cards

What are the reaction conditions for addition polymerisation?

High pressure and an initiator (provides free radicals to start the reaction).



6
New cards

Give the monomer and a use for each: PE, PP, PVC, PTFE, poly(styrene)



  • PE — ethene → milk containers (HDPE), plastic bags (LDPE)

  • PP — propene → car bumpers, syringes

  • PVC — chloroethene → electrical insulation, raincoats, blood bags

  • PTFE — tetrafluoroethene → non-stick coating (Teflon®), dental floss

  • Poly(styrene) — styrene (phenylethene) → toys, cups


7
New cards

What is the C–C–C bond angle along the backbone chain of an addition polymer like PVC?

109° (all carbons in the backbone are sp³ hybridised, tetrahedral geometry)



8
New cards

How does the C–C bond in poly(ethene)compare to the C=C bond in ethene?

In poly(ethene), the C–C bond is a single bond → longer and weaker than the C=C double bond in ethene.

9
New cards

What functional group combinations form polyesters vs polyamides?

  • Polyester: dicarboxylic acid + diol → ester bond (–COO–), eliminates H₂O

  • Polyamide: dicarboxylic acid + diamine → amide bond (–CO–NH–), eliminates H₂O

  • Polyamide (alternative): diacyl chloride + diamine → amide bond, eliminates HCl



10
New cards

What are the monomers and uses of PET?

Monomers: benzene-1,4-dicarboxylic acid(terephthalic acid) + ethane-1,2-diol (ethylene glycol) Bond: ester Uses: Terylene fabric, PET bottles, surgical sutures, Mylar balloons



11
New cards

What are the monomers and uses of Nylon 6,6?

Monomers: hexane-1,6-dicarboxylic acid + 1,6-diaminohexane Bond: amide Uses: backpacks, ropes, clothing



12
New cards

What is the difference between Nylon 6,6 and Nylon 6?



  • Nylon 6,6 — formed from two differentmonomers (each with 6 carbons): hexane-1,6-dicarboxylic acid + 1,6-diaminohexane

  • Nylon 6 — formed from one monomer: ε-aminocaproic acid (bifunctional — has both –NH₂ and –COOH) → Nylon 6 has a smaller repeat unit



13
New cards

How do you identify the repeat unit of a condensation polymer?



  • Draw a line through the C–N bond (polyamide) or C–O bond (polyester) of the linkage group

  • Follow the chain until just before it repeats → that section is the repeat unit


14
New cards

How do you identify the monomers from a condensation polymer structure?



  • Locate the ester or amide bond within the repeat unit

  • Break that bond and add back –OH and –COOH (for ester) or –NH₂ and –COOH (for amide) to get the two monomers


15
New cards

What type of polymer are proteins, and what are their monomers?

Proteins are condensation polymers(specifically polyamides) made from α-amino acids as monomers, linked by peptide (amide) bonds.



16
New cards

What is a peptide bond?

The amide bond (–CO–NH–) formed between the α–COOH of one amino acid and the α–NH₂of another α-amino acid via condensation.

17
New cards

What is the general structure of an α-amino acid?

knowt flashcard image
18
New cards

By convention, how is a peptide structure written?

N-terminal (free –NH₃⁺) on the left, C-terminal(free –COO⁻) on the right. e.g. Gly-Ala-Phe ≠ Phe-Ala-Gly (sequence matters!)

19
New cards

What are the conditions for complete hydrolysis of a protein?

Reagent: 6 mol dm⁻³ HCl(aq) or NaOH(aq)Condition: heat (100–120°C, 24 hours in evacuated tube) Product: individual amino acids

20
New cards

What does acidic hydrolysis of a protein give vs alkaline hydrolysis?

Both break all peptide bonds to give constituent amino acids:

  • Acidic (HCl/H₂SO₄ + heat) → amino acids as ammonium salts (–NH₃⁺)

  • Alkaline (NaOH + heat) → amino acids as carboxylate salts (–COO⁻)



21
New cards

What is the difference between complete and partial hydrolysis of a protein?

  • Complete: gives the types and amounts of amino acids but no sequence info

  • Partial (enzymatic): gives smaller peptide fragments → sequence can be deduced from overlapping fragments


22
New cards

Why are poly(alkenes) not biodegradable?

Poly(alkenes) are macromolecules of alkanes — they are chemically inert due to:

  1. Non-polar C–C and C–H bonds → no attraction to polar reagents

  2. Strong C–C bonds → do not break under normal conditions → resistant to hydrolysis


23
New cards

By convention, how is a peptide structure written?

N-terminal (free –NH₃⁺) on the left, C-terminal(free –COO⁻) on the right. e.g. Gly-Ala-Phe ≠ Phe-Ala-Gly (sequence matters!)



24
New cards

Why are polyesters and polyamidesbiodegradable?

They contain ester bonds (–COO–) and amide bonds (–CO–NH–) respectively in their backbone → these bonds undergo hydrolysisin aqueous acid or alkali with heat, breaking down the polymer chain.



25
New cards

PHB is a bacterial polymer with ester groups in its backbone. Is it biodegradable and why?

Yes — PHB is a condensation polymer(polyester) and undergoes hydrolysis with aqueous acid/alkali and heat due to its ester linkages. Answer: B



26
New cards

What are the 4Rs in order of decreasing environmental desirability?

Reduce → Reuse → Recycle → Recover(energy)

27
New cards

What are the economic factors to consider in recycling plastics?

  • Landfill cost — space becoming scarce, land has alternative uses

  • Cost of raw materials — ~4% of world oil used as plastic feedstock; oil is non-renewable

  • Reprocessing cost — collecting, sorting, cleaning, remanufacturing may make recycled product more expensive



28
New cards

What are the environmental factors to consider in recycling plastics?

  • Landfill — long-term soil/groundwater contamination from toxic additives leaching

  • Incineration — releases toxic fumes (dioxins, CO₂ greenhouse gas), contributes to global warming; PVC releases poisonous gases (polychlorinated biphenyls)


29
New cards

What are the social factors to consider in recycling plastics?

Requires lifestyle changes from the public (e.g. BYOB bags, reusing containers). Re-use is already practised industrially (pallets, containers). Public willingness is key to success.

30
New cards

What are the three types of intermolecular forces between polymer chains, in increasing strength?

  • Instantaneous dipole–induced dipole (id–id)— all polymers (e.g. LDPE, HDPE)

  • Permanent dipole–permanent dipole (pd–pd)— polar polymers (e.g. PET/Terylene — C=O groups)

  • Hydrogen bonding — polymers with N–H or O–H groups (e.g. Nylon 6,6 — between C=O and N–H on different chains)


31
New cards

What is the order of melting points for polymers based on intermolecular forces?

non polar (id-id) < polar (pd-pd) < hydrogen bonded

32
New cards

Compare linear, branched, and cross-linkedpolymer structures and their properties

  • Linear — chains pack closely → strong id-id forces → high density, strong, rigid (e.g. HDPE)

  • Branched — poor packing → weaker id-id forces → lower density, soft, flexible (e.g. LDPE)

  • Cross-linked — covalent bonds between chains restrict movement → hard, rigid, brittle; cannot be melted or recycled (e.g. Bakelite)


33
New cards

Why is LDPE soft and flexible while HDPE is hard and rigid?

  • LDPE: branched chains → poor packing → weaker id-id forces → soft, elastic (density 0.92 g cm⁻³)

  • HDPE: linear chains → close packing → stronger id-id forces → hard, rigid (density 0.96 g cm⁻³)


34
New cards

Why is PVA water-soluble but PVC is water-resistant?

  • PVA has –OH groups → forms hydrogen bonds with water → dissolves

  • PVC has –Cl groups → no hydrogen bondingwith water → water-resistant



35
New cards

Why do polyamides (nylon) crease more than polyesters (Terylene/PET)?

  • Polyamides: N–H groups form extensive H-bonds with water → absorb more water → when water evaporates, chains lock in a new arrangement → prone to creasing

  • Polyesters: only pd-pd interactions with water → less water absorption → less creasing, dries faster



36
New cards

Why is PP suitable for storing alkaline cleaning solutions but PET is not?

  • PP has only C–C bonds → no ester groups → resistant to alkaline hydrolysis ✅

  • PET has ester groups → undergoes alkaline hydrolysis → carboxylate salts + alcohols → polymer degrades ❌


37
New cards

What is the difference between thermoplasticsand thermosetting polymers?

  • Thermoplastics: chains held by weak intermolecular forces (no cross-links) → soften on heating, harden on cooling → recyclable (e.g. PE, PVC, PET, nylon)

  • Thermosetting: chains held by strong covalent cross-links → cannot melt → degrade on strong heating → cannot be recycled (e.g. Bakelite, poly(diallyl phthalate))


38
New cards

Why do thermosetting polymers degrade rather than melt when strongly heated?

The covalent cross-links are so extensive that strong heating breaks all covalent bonds in the polymer chains (not just cross-links), causing degradation rather than softening/melting.